Categories

Best Precision Signal Isolators

MAOPINER 4Pack Ceiling Vibration Damping Mounts, Spring Vibration Isolator for Soundproof and Shockproof for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • Premium Material: The red part of the ceiling vibration damping mounts is made of silicon instead of rubber, better functioning in absorbing vibration. And also the silicon applied is qualified, safe and environmentally friendly material..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base of the mechanical vibration damping pads has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock

2x PLX-500 Bundle with DJM-250MKII and HDJ-1500S

  • EXCELLENT SOUND DESIGN - Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.
  • EASY DIGITAL RECORDING - Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.
  • SMOOTH DJ PLAY - Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.
  • Precise, fluid mixes are a breeze using the mixer's channel faders, and the 3-band isolators give precision across the highs, mids, and lows.
Check Stock

Ximimark 2Pcs Current to Voltage Converter Module 0/4-20mA to 0-3.3V 0-5V 0-10V Voltage Transmitter Signal Conversion Conditioning Board

  • During the transmission of the circuit signal, the voltage signal will become weaker as the transmission distance increases. The current transmission....
  • This module is used for the end of the current signal transmission, and converts the signal into a voltage signal for detection by the single chip....
  • Wide supply voltage range, output voltage support multiple ranges, zero and full scale can be adjusted..
  • The current signal sampling resistor adopts high-precision color ring resistance, high precision, small temperature drift and high power..
  • High stability, good linearity, industrial grade..
Check Stock

XYGStudy for Raspberry Pi 4B/3B+/3B/2B/B+/A+ Jetson Nano High-Precision AD/DA Expansion Board Sheild Onboard ADS1256 DAC8552 ADC DAC Jumper

  • There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate. Onboard DAC8552, 2ch 16bit high-precision DAC.
  • Onboard input interface via pinheaders, for connecting analog signal. Onboard input/output interface via screw terminals, for connecting analog/digital signal. Features AD/DA detect circuit, easy for signal demonstration.
Check Stock

Gustard R26 Discrete R2R Decoder MQA Native DSD DAC with Streamer/Renderer PCM768K DSD512 XU216 K2 IIS Decoder(Silver)

  • Discrete R2R DAC: R-2R ladder DAC converts the digital signal to analog signal by switching resistors' array, it provides a more natural sound. However, this architecture needs precision resistors and deep development to archieve fine performance..
  • Native 1Bit DAC:support DSD 512 (via USB) and DSD 1024 (via IIS). The DSD streamdecoded by the independent 1 bit convertor without DSD to PCM converting.*Volume is fixed under this mode..
  • CPLD: Complex Programmable Logic Device：Signal routing.
  • Clock synthesization: Replace the input signal' s clock with precision oscillators (local or external). Interference from the input source' s clock is avoided. Function off: IIs, AES, COAX, OPT, BT.
  • PCM NOS, 1 Bit Function on: USB & LAN K2, ultra-low noise clock synthesizer: provides precision clock from local oscillators or external clock in..
  • LPF is specifically designed for the D/A converter using discrete devices. Final parameters of the circuit are adjusted with subjective listening. Different from IC s, discrete....
Check Stock

Gustard R26 Discrete R2R Decoder MQA Native DSD DAC with Streamer/Renderer PCM768K DSD512 XU216 K2 IIS Decoder(Black)

  • Discrete R2R DAC: R-2R ladder DAC converts the digital signal to analog signal by switching resistors' array, it provides a more natural sound. However, this architecture needs precision resistors and deep development to archieve fine performance..
  • Native 1Bit DAC:support DSD 512 (via USB) and DSD 1024 (via IIS). The DSD streamdecoded by the independent 1 bit convertor without DSD to PCM converting.*Volume is fixed under this mode..
  • CPLD: Complex Programmable Logic Device：Signal routing.
  • Clock synthesization: Replace the input signal' s clock with precision oscillators (local or external). Interference from the input source' s clock is avoided. Function off: IIs, AES, COAX, OPT, BT.
  • PCM NOS, 1 Bit Function on: USB & LAN K2, ultra-low noise clock synthesizer: provides precision clock from local oscillators or external clock in..
  • LPF is specifically designed for the D/A converter using discrete devices. Final parameters of the circuit are adjusted with subjective listening. Different from IC s, discrete....
Check Stock

Wztepeng 500A 12V Mobile Audio Relay Battery Isolator 500Amp 12Volt Relay

  • Battery Isolator:Battery isolators are suitable for applications that need to isolate multiple batteries, such as mobile audio, marine, powered sports, etc. It is used to isolate batteries that power AV, navigation, etc. It allows the second battery to be fully dedicated to the sound system and does not create a voltage drop like common isolators tend to do. The isolator will draw less than 1 amp when your vehicle is powered on..
  • Extends battery life:its a must for daily driver systems,This 500 amp continuous duty relay does not have the voltage drop that a solid state battery isolator has and does a much better job of charging auxiliary batteries through..
  • Feature:Made of high-quality materials, excellent performance and durable.Easy to install and start up immediately..
  • Package Include:1 * 500 Amp 12V Mobile Audio Relay Battery Isolator.
  • Warranty: For any reason, if you are not satisfied with your purchase, please contact us directly. We offer Half a year warranty, 100% satisfaction guarantee..
Check Stock

GearAmerica UBER Shackle Isolators – Only for GA UBER Shackles Will Not Fit a 3/4 D Ring – Helps Prevent Corrosion and Protect Finish – Reduces Noise and Rattling – 2 Pack

  • Keep Your Equipment Safe: Protects your vehicle and your Mega Shackles from scrapes, dings and scuffs and prevents corrosion.
  • Silence Rattle Noise: Our isolators work wonders to eliminate rattle noise while keeping your bumper safe.
  • Exclusively Fits GearAmerica Mega Shackles : These isolators are the perfect functional complement to our bold, virtually unbreakable GearAmerica Mega....
  • Purchase with Confidence: All GearAmerica products include our industry-leading Hassle-Free Lifetime Replacement Warranty.
  • If You Love the Open Road, Join Us: Our mission is to advocate and live a lifestyle of freedom, with respect for nature & machinery, that’s why....
Check Stock

Studio Monitor Isolation Pads - Suitable for 6.5'- 8' inch Speakers - Large Speaker Isolation Pads Fit Most Desktops - High-Density Acoustic isolation Foam - Angled Speaker Foam Stand - 2 Speaker Pads

  • Speaker isolation pads size 10.4 x 13 x 1.6 Inches (W x D x H). Speaker foam is designed to fit with the most popular 6.5″ – 8″ Large monitors.
  • Speaker platform high-density acoustic isolation foam for professional use (50kg/m^3 density)..
  • Angled speaker stand two-component design, monitor isolators allow 5 different angle configurations..
  • Speaker stand desk generates cleaner, more precise sound by reducing vibrations and low-end distortion..
  • Subwoofer sound isolation pads keep your studio’s desktop clean look with no logo on the front of the monitor isolators.
Check Stock

SSX On Tour - PlayStation 2

  • Must set PS2 to Y Pb Pr / Y Cb Cr output before using, or you will see out of range. It Supports All PS2/PS3 Display Modes 480i, 576i, 480p..
  • Provide the best upscaled signal processing with great precision, colors, resolution..
  • No need to install drivers, Convert PlayStation 2/3 signal to HDMI signal..
  • 24 Months Support, Repair or Replacement Warranty..
Check Stock

Amprobe AT-8030 Advanced Industrial Wire Tracer Kit

  • Traces AC/DC circuits from 0 - 600 V. The transmitter and receiver are CAT IV 600 V safety rated for electrical circuits in industrial environments.
  • Offers two output frequency modes for optimal tracing- 6 kHz for energized circuits- 33 kHz for de-energized circuits.
  • Features three power modes: “High” power mode for normal circuits, “Low” power mode for precision tracing in difficult areas and "Clamp" power mode provides a boosted induction signal via the optional signal clamp.
  • Includes a Signal Clamp (CT-400) clamp-on attachment for inducing a signal in wires where you don’t have access to bare conductors.
Check Stock

Mono-gatari 4Pcs Spring Vibration Isolator Ceiling Vibration Damping Mounts Anti Vibration Ceiling Suspended Mounted with Removable Frame for A/C Air Handler Bedroom Theater Studio 110 Lb Capacity

  • 【Damping Structure】The red part is made of unique damping silica, better functioning in absorbing vibration, especially for places with subwoofers in entertainment venues..
  • 【High Quality】Vibration damping mounts is composed of 3mm thick steel spring, damping silicone layer, outer frame. Silicon applied is environmentally friendly material..
  • 【Specification】Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 23.6 inch. E.g. 63~99 isolators are needed for a room aera of 215~322 sq ft..
  • 【Easy Installation】Anti vibration isolator spring is designed with a 5/16 inch (M8) pre-drilled bolt hole, easy installation on ceilings, floors, walls, ducts, HAVC, etc..
  • 【Wide Application】Anti vibration ceiling suspended mounted is widely used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room, TV stations, concert halls, etc..
Check Stock