Categories

Best Precision V blocks

Bosch PKP 18E GN Hot Melt Glue Gun / PKP 18E GN

  • NOZZLE WITH HEAT PROTECTION COVER AND DRIP BLOCK.
  • PRECISION NOZZLE, ACCURATE, POSITIVE APPLICATION.
Check Stock

Adjustable Current LED Driver, DC 3.3V 3.7V 5V LED Driver 30-1500mA Constant Current Adjustable Module for LED 18650 Li-ion

  • This product is a current regulation integrated circuit operating from an input voltage of 2.8V to 6V, the constant output current can be set up to 1.5A with an external resistor..
  • It consists of high precision reference voltage, amplifier, current mirror, etc. The on-chip power transistor and current sense block greatly reduce the external component count, which makes this product ideal for LED driver..
  • When the CE pin is high, the input voltage is greater than 2.8V, and is larger than the LED forward voltage plus the required voltage drop, it functions normally to deliver constant current from the LED pin..
  • Adopts the temperature regulation instead of temperature protection function, the temperature regulation can make the LED being turned on continuously in case of high ambient temperature or high voltage drop. When the junction temperature reaches about 1.
  • With e chip enable function, which can shutdown the whole chip to limit the current consumption within 1uA. Adopts the over current protection block. When LED current approaches 1.9A(Typical), the over current protection block begins to function to prevent the LED current from increasing further..
Check Stock

DEWALT DWHT42151 Premium 24 inch I-Beam Level

  • Shock absorbing end caps to protect the level.
  • V-groove base for accurate alignment on rounded surfaces and edges.
  • Solid block vials for superior durability and accuracy (0.0005" / in).
Check Stock

HHIP 1.25 X 1.25 X 1.77 INCH V-Block & CLAMP Set (3402-0952)

  • All sides are ground square and parallel to each other.
Check Stock

Fowler 52-475-500-0, X-Blox X-Block Set

  • 1 year warranty offered by Fowler High Precision.
  • Use this universal holding tool for small, miniature or intricate parts..
  • Ideal for holding, grinding/indexing punches and pins, drilling, milling, EDM, inspection on optical comparators..
  • Includes 2 pairs of holding clamps to secure parts.
Check Stock

Yahboom RC Servo Tester 1 8 16 Channels Servo Motors Controller Centering Tool with Over-Current Protection, 2 Control Modes (Servo Tester 8 chan)

  • 8-channel independent servo interface and 8 high-precision potentiometers..
  • Support manual mode,centering mode,which can be switched by function keys.
  • Terminal block （5-8.4V）power supply port,with Over-Current Protection. Compatible with any 5V-8.4V servos..
  • Control accuracy: 0.09 degrees(PWM limit small change value 1us).
  • Wide range of applications.No need any codes, servo can be controlled by buttons or the adjustable knobs..
Check Stock

Oshlun SDS-0842 8-Inch 42 Tooth Stack Dado Set with 5/8-Inch Arbor & POWERTEC 71009 Safety Push Block and Stick Set | 5 Pack | Ergonomic Handles with Max Grip | Push Blocks and Sticks

  • Product 1: Professional grade C-4 carbide.
  • Product 1: Precision ground carbide tips.
  • Product 2: INCLUDES: (1) Long Hold Down Push Block (2) Short Hold Down Push Blocks (1) Safe V Stick and (1) Straight Push Stick.
Check Stock

Swanson Tool BBL240 24-Inch Box Beam Level (Yellow)

  • Precision-milled, heavy-duty aluminum frame for maximum durability.
  • Super Shock molded rubber inserts encase skeletal plastic end caps for extra shock absorption.
  • Ergonomic, rubberized grips for comfortable, easy handling.
  • Deep, accurized V-groove for round and square stock.
  • Multi-ring vials indicate 2° and 4° grade for drainage—ideal for lanscapers and plumbers.
  • Top-read center vial for an accurate read in tight spaces.
  • Durable acrylic block vials accurate to .029°(.0005 in.).
Check Stock

Work Sharp Precision Adjust Knife Sharpener

  • Two Carbide sharpeners - one dedicated knife sharpener and one dedicated tool sharpener.
  • The Work Sharp Precision Adjust Knife Sharpener is an angle guided, 3-sided abrasive jig-and-clamp style sharpener that makes manual sharpening faster, easier and more precise than ever..
  • ADJUSTABLE, REPEATABLE - Sharpening angle can be easily adjusted from 15°- 30°, in 1° increments..
  • TRI-BRASIVE ROD - Quickly index between coarse and fine diamond and fine ceramic stone..
  • V BLOCK CLAMP - Removable clamp secures knife safely and consistently..
  • 3-YEAR WARRANTY - protects every Work Sharp tool against defects due to workmanship or design.
Check Stock

81 PCS/SET SQUARE GAGE BLOCK SET w.NIST Equivalent certificate, GRADE B

  • 81 PCS/SET SQUARE GAGE BLOCK SET w.NIST Equivalent certificate, GRADE B.
  • Description: 81 pcs/set steel precision SQUARE gage block set, grade B--w. tollerance of 50 millionth of inch. All block mirror polished, with serial number and size, WITH GAGE HOLE Complete with NIST equivalent certificate of calibration showing deviation of each block. Meets or exceed Fed. Spec. GGG-G-15C and Conform to MIL-STDD-45662A.
  • 9 blocks: .1001" - .1009" in .0001" steps 49 blocks: .101" - .149" in .001" steps 19 blocks: .050" - .950" in .050" steps 4 blocks: 1.000" - 4.000" in 1.000" steps Fitted in heavy duty and precision made wooden box..
Check Stock

Work Sharp WSSAKO81115 Replacement Belt Kit for Ken Onion Blade Grinder Attachment

  • The Work Sharp Precision Adjust Knife Sharpener is an angle guided, 3-sided abrasive jig-and-clamp style sharpener that makes manual sharpening....
  • ADJUSTABLE, REPEATABLE - Sharpening angle can be easily adjusted from 15°- 30°, in 1° increments..
  • TRI-BRASIVE ROD - Quickly index between coarse and fine diamond and fine ceramic stone..
  • V BLOCK CLAMP - Removable clamp secures knife safely and consistently..
  • 3-YEAR WARRANTY - protects every Work Sharp tool against defects due to workmanship or design.
Check Stock

24 In. Lightning® LED Magnetic Box Beam Level—Pro Series

  • Precision-milled, heavy-duty aluminum frame for maximum durability.
  • SuperShock molded rubber inserts encase skeletal plastic end caps for extra shock absorption.
  • Ergonomic, rubberized grips for comfortable, easy handling.
  • Deep V-Groove seats magnetic edge on round or square stock.
  • Multi-ring vials indicate 2° and 4° grade for drainage—ideal for lanscapers and plumbers.
  • 3 LED-illuminated vials for easier reading in dark workspaces.
  • Durable acrylic block vials accurate to . 029°(. 0005 in. ).
  • Battery-saving 10-minute automatic shutoff.
  • Ims technology Magnetic system features 6 Internally sealed magnets.
Check Stock

240W 180W Dell AC Adapter Charger for Dell Alienware 13 15 17 R1 R2 R3 R4 Series,Dell Alienware X51 M17 M15 M17X M18X,Dell Precision 7710 7730 7520 M6700 M6800 PA-9E Laptop Charger Power Supply Cord

  • Specifications: INPUT: AC/DC 100-240V 50-60Hz.
  • OUTPUT: 19.5V 12.3A. Power: 240W, CONNECTOR SIZE: 7.4mm*5.0mm.
  • (Aslo Compatible With 19.5V 9.23A 180W 150W 19.5V 6.7A Watts: 130 Watts).
  • This Charger Compatible with Dell Alienware M17x, Dell Alienware M17X R2, Dell Alienware M17X R3, Dell Alienware M17X R4 , Dell Alienware M18X,Dell Alienware M18X R2, Dell Alienware X51, Dell Alienware 15 R1 R2 R3 R4 Series Laptop Charger..
  • This Charger Compatible with Dell Precision 7710， Dell Precision 7720， Dell Precision 7730 ，Dell Precision 7510，Dell Precision 7520 ，Dell Precision 7530，Dell Precision M6400，Dell Precision M6500，Dell Precision M6600，Dell Precision M6700，Dell Precision M6800，Dell Precision P29E P34E P34E002 Laptop..
  • This Charger Compatible P/N:PA9E，PA-9E，330-3514,J211H,Y044M,330-4342,J938H,U896K, FWCRC ，LA240PM180, 7XCR6, 07XCR6, DA240PM180, 0RYJJ9, RYJJ9, 8N2T2, 450-AGCX.
  • Package Include:1X AC Cord,1X AC Adapter.
  • Safety & Warranty: CE-/FCC-/ROHS-Certified for safety, 12 months warranty.
Check Stock