Categories

Best Press Dies Mold

13pcs Watch Press Tool Set with 12 Dies Back Case Closer Watch Repair Tool

  • Easy & quick to fix watch: only three steps - choose two suitable dies, screw them on the press tool, and then press down the handle. Comes with 12 assorted dies: 24, 26, 28, 30, 31, 32, 33, 34, 36, 38, 40 & 42 Snap-on system allows dies to snap on and off quickly High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • Comes with 12 assorted dies: 24, 26, 28, 30, 31, 32, 33, 34, 36, 38, 40 & 42.
  • Snap-on system allows dies to snap on and off quickly.
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
Check Stock

Testament Of Youth

  • Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
  • Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock

6PCS/lot Balloons Metal Die Cuts,Balloons Party Festival Invitation Card Cutting Dies Cut Stencils for DIY Scrapbooking Album Decorative Embossing Paper Dies Card Making

  • ...8.8cm/4.17''X3.46''.It fit for make any Card Making.Designed in a beautiful cursive font and would be the perfect addition to your cards,tags and gifts..
  • 【Makes Great Stencils】 - Perfect for Creating Gift This beautiful design is a stunning way to impress your loved ones, adding a wonderfully intricate feature to embellish your papercraft projects. This will be perfect for cards celebrating a range of occasions. You'll have the perfect die-cut design to add to your papercraft masterpieces!.
  • 【Function】decorations for paper dies cutting for boys for girls best birthday gift Balloon Butterfly Birch Trees Fish Spider Scrapbooking Die Cuts Carbon Steel Stencil Metal Album Card Paper Craft Decoration DIY Template Metal Cutting Dies Christmas Embossing Dies Stencil Template for DIY Scrapbook Album Paper Card Craft Decoration dies on the cowboy dies..
  • 【Material】 High Quality Thin Metal Cutting Dies made of 100% Carbon Steel . Highly detailed and delicate.embossing press debossing dies cutting tools and embossing dies for graduation craftsman homemade impress precision cutting dies memory dies sc....
Check Stock

FLKQC 13 Piece Watch Press Set | Watch Back Press Watch Back Case Closer Include 12 Dies with Metal Inserts

  • Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
  • Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock

Yescom Portable Manual Grommet Machine Eyelet Hand Press Puncher Hole Punch Piler

  • [Magnetic Mold]: Magnetic mold for absorbing and fixing the eyelets well and quickly, preventing eyelets from shifting and falling off, easy to use, can save more time and help you work much faster.
  • [Strength Saving]: 2-Point support leverage design for strength saving and convenient pressing, just one press then a grommet is set into the material perfectly.
  • with the correct opening angle, you can press it by only one hand.
  • [Anti-skid Handle]: Anti-skid and anti-friction rubber handle for an easy and comfortable grip, forefinger protruding design for more labor-saving and holding tightly when pressing, suitable for long time working.
  • [Durable & Wide Application]: Sturdy cast metal body and steel dies for durability and frequent use.
  • widely used on different materials such as canvas, PVC cloths, leather, tarpaulin and corrugated paper, not only perfect for household DIY usages, but also for craft enthusiasts and craftsmen to make DIY craft projects and decorating works.
Check Stock

Professional 13 Piece Watch Press Set - Watch Back Press - Watch Back Case Closer Include 12 Dies with Metal Inserts (Blue)

  • 13 Piece Watch Press Set Watch Back Press Back Case Closer Crystal Glass Fitting Watch Repair Tool.
  • Material Cast Iron watch back case press, durable and strong.
  • Includes 12 dies for 21&23,24&26,28&30,31&32,33&34,36&38,40&42.44&46,48&50.
  • These exclusive straight wall nylon dies will not scratch or mar crystals.
  • Color: Blue Watch Press Back Case Closer.
  • A perfect watch press for snap on watches, allows dies to snap on-and-off quickly.
Check Stock

Handmade Manual Press Machine Stud Rivet Setter Punch Puncher Tools Dies 6-20mm 8mm diameter

  • This Kit includes a Hobby Trendy Hand Press, one 9 mm Single Cap Rivet Dies, 9mm single cap and 9 mm double cap rivet dies.
  • 2 mm hole punches are recommended for 9 mm rivets: 2.5 mm hole punch is recommended for 12.5 and 15 mm snap button dies: 3 mm hole punch will be....
  • Open Ring snap Button dies are for 9.5mm open ring prong snap buttons and no hole punches are needed..
  • All of the dies included in this set works perfect with Hobby Trendy Hand Press that is included in this set. Currently , there are 5 available colors....
Check Stock

Temery Watch Press Set, Watch Back Case Closer, Watchmaker Watch Repair Tool Kit with 12pcs Fitting Dies

  • Coming with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch..
  • Easy & quick to fix watch: only three steps - choose two suitable dies, screw them on the press tool, and then press down the handle..
  • Good for closing your snap back watch case after repairing job, not for crystal apart. Note: Before pressing the cover, make sure to use the correct fitting dies to avoid damaging the watch..
  • Equipped with a cleaning cloth for padding under your watch while press to protect your watch well..
Check Stock

Wilson Clash 100 Tennis Racquet - Quality String 4-1/2

  • 【Magnetic Mold】Magnetic dies to fix the eyelet and washer well. With the correct opening angle, you can press it by only one hand..
  • 【Anti-slip & Anti-friction Handle】The handle made of anti-slip engineering rubber material is anti-friction, anti-slip, and easy holding..
  • 【More Strength Saving】Using the principle of two-point support leverage, it is convenient to use and more strength saving to use. This manual....
  • 【Portable & Lightweight】This manual eyelet puncher with a special lightweight design, it is easy to take to any place..
  • 【Widely Used】It can be used for PVC banners, tarpaulin, garments, bag, and case, etc..
Check Stock

Hobby Trendy Hand Press Set with Hole Punches Essential Dies for Snap Buttons Eyelets Grommets Rivets Setting Navy Press

  • This Kit includes a Hobby Trendy Hand Press, one 9 mm Single Cap Rivet Dies, 9mm single cap and 9 mm double cap rivet dies.
  • 2 mm hole punches are recommended for 9 mm rivets: 2.5 mm hole punch is recommended for 12.5 and 15 mm snap button dies: 3 mm hole punch will be....
  • Open Ring snap Button dies are for 9.5mm open ring prong snap buttons and no hole punches are needed..
  • All of the dies included in this set works perfect with Hobby Trendy Hand Press that is included in this set. Currently , there are 5 available colors....
Check Stock

MEOZEL Watch Press Tool, Watch Press Set Back Case Closer, Watch Repair Kit with Press, Watch Press Tool with 12 Addition Dies, Blue, (ME-05)

  • [Premium Quality Metal Watch Press Set] The press is of metal construction and the durable designed ABS plastic dies with a metal screw in the middle , it won't scratch your watch. The arm of the press is spring loaded, which keeps the press in the open position. The spring is very nice and does not require too much pressure to close it..
  • [Well Made Product Watch Kit] This watch back press tool with 12 dies double size to allow for 50/48mm 46/44mm 42/40mm 38/36mm 34/33mm 32/31mm 30/28mm 26/24mm 23/21mm 20/18mm. The various sizes make it easy to find the right ones..
  • [Make repairs simple] Easy three steps to use this watch press set - choose two suitable dies, screw them on the watch press tool, and then press down the handle..
  • [Perfect match with Different Watch Back Case Size] The fixed seat is used to fix the watch, the watch press set opens the watch back, replace the watch battery with tweezers or other repairs, and then press the kit with a watch case closer on the watch back..
Check Stock

BYNIIUR 19 Pcs Watch Press Set, Watch Repair kit with 18mm-50mm Fitting Dies for Watch Back Case Remover Closer, and Battery Replacement

  • Package Included: 12 pieces assorted dies, one watch case holder , one adjustable watch back remover tool, one watch back opening tool knife, tweezers, one piece cleaning cloth,6 finger coats and detailed instructions..
  • High Quality Watch Repair Kit: The watch press is made of cast metal to ensure strength, the arm of the press is spring loaded it keeps the press in the open position.The dies are made of ABS plastic, which will not scratch the watch or mar crystals..
  • Different Size Dies to Fit Your Watch: 12 assorted dies suitable for the watch sizes from 50/48mm 46/44mm 42/40mm 38/36mm 34/33mm 32/31mm 30/28mm 26/24mm 23/21mm 20/18mm..
  • Watch Back Case Remover Tool: Come with adjustable watch back case removal opener, its tempered tips can be adjusted from 13 mm to 56 mm, you just simply placing the blade under the case back and pry it off easily..
  • Come with instruction for easily use: BYNIIUR Watch Press comes with a detailed manual that will guide you how to use these tools. If you are still confused, please feel free to contact BYNIIUR for help, we will offer you resolutions with....
Check Stock

Grommet Machine Hand Press Kit Heavy Duty Manual Rivet Punch Grommet Tool Eyelet Kit 3 Dies Set (#0#2#4-6/10/12mm) with 1500 Grommets Eyelet for Curtains Scrapbooking Flags Belts Bags Shoes

  • [Heavy-Duty Iron Construction]: Sturdy and durable, the manual hand grommet press machine rivet puncher machine is made of high-quality heavy iron with protective paint for long life, high hardness and high precision.
  • [3 Mold Types]: Grommet punch press with Interchangeable dies to meet different needs, 1/4" (6mm), 3/8" (10mm), 1/2" (12mm) 3 mounting holes, manual operation, easy to use.
  • [With 1500 Grommets]: 1500 grommets in 6mm, 10mm and 12mm for many projects, long-lasting use.
  • If you have any questions about the grommet press kit, please feel free to contact us, we will help you solve the problem quickly.
  • [Widely Used]: Grommet press kit, making handicrafts, logo shops, banners, jackets, awnings, posters, curtains, slogans, flags, belts, eyelets, bags, shoes, clothes, signs, items needed, grommets are also suitable for pictures on KT boards and other advertising purposes.
Check Stock