Blood Pressure (Crinkles, Fabric, Velcro, Air Puffs, Air, Paper & Writing)
- HEAT ACTIVATED FABRIC TAPE: For thick fabric alterations and hemming, this heat activated application allows the cloth tape to securely and permanently bond to heavier fabrics.
- FOR DIFFICULT TO SEW FABRICS: Simple to use cut-to-length roll, peel off the protective backing and position on fabric, iron with the fastener side faced down, allow adhesive bond to set for 24 hours to achieve full strength.
- PERMANENT BOND: A strong iron on hem tape that provides a permanent bond to mend curtains or hem pants, dresses, or jeans.
- BONDS TO HEAT TOLERANT FABRICS: Designed for use on cotton blends, polyester, fleece, suede, denim, and nylon.
- be sure to use a press cloth for delicate fabrics.
- MACHINE WASH OR DRY CLEAN: Created to withstand laundering for long lasting use, close fastener and simply wash in cold or warm water only (not recommended to launder in hot water).
Check StockSnaps Rivet Grommet Prong Eyelet Popper Fastener Self Cover Fabric Button Hand Press Machine Set
- [Handpress Machine] Universal Hand Press Machine for grommets, snap buttons, rivets, fabric covered buttons.
- [Snap Button Dies] 1 set of die for 10 mm 'S' spring press fasteners type VT2 (includes 4 pieces) 1 set of die for 12,5 mm 'S' spring press fasteners type T54 (includes 4 pieces) 1 set of die for 15 mm 'S' spring press fasteners type Alfa (includes 4 pieces) 1 set of 9.5mm Perforated prong snap button fastener button tool/die (includes 2 pieces).
- [Rivet Dies] 1 set of 7mm Rivet Die/Mold (includes 2 pieces) 1 set of 9mm Rivet Die/Mold (includes 2 pieces).
- [Grommet Eyelets Dies] 1 set of 5.4mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 7.5mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 9mm Inner Diameter Grommet/Eyelet Die/Mold (includes 2 pieces).
- [Hole Puncher] 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece brass base for a hole cutter.
Check StockRexka Rear Trunk Liner Push-Type Retainer for Mazda B467-68-AC3-02 CX-7 CX-9 Mazda 5 (Pack of 30)
- Other Names:Console Assembly Screw, Door Trim Panel Fastener, Side Cover Fastener, Lower Trim Panel Fastener, Pkg Tray Trim Clip, Rear Panel Trim Fastener, Rear Pillar Trim Fastener, Side Panel Fastener, Side Trim Fastener, Trunk Side Trim Fastener, Upper Molding Fastener, Cowl Trim Fastener, Trunk Lid Trim Fastener, Quarter Pillar Trim Fastener, Rear Pillar Trim Clip, Trim Panel Assembly Fastener, Under Cover Fastener, Lower Center Pillar Trim Fastener, Trim Panel Assembly Clip, Fastener.
- Head Diameter: 18mm Stem Length: 14mm Fits Into 6mm Hole.
- Replaces Mazda: B46768AC302 Mazda 5, CX-7, CX-9, Miata, Millenia, MX-6, RX-7 & Protégé 1993 -.
- Positions:Left Front, Left Lower, Left Rear, Left Upper, Right Front, Right Lower, Right Rear, Right Upper.
Check StockHeavy Duty Snap Fastener Pliers Tool Kit for Fastening Snaps, Replacing Metal Snaps, DIY Cover, Canvas (with 2 Interchangeable Dies, Gloves and Tape Measure)
- 【Snap Fastener Tool For Installing Snaps】Upgraded Version. Convenient and Safe. Now you can attach snaps without having to remove the item, Just simply find where you want to add a snap and cut pilot holes, Then use our Snap Fastener Pliers tools to flexibly install. Better than pounding Installation method, and Won't hurting your hand..
- 【Provide Strong Pressure】Adjustable tension for easy snap installation. The adjustable pliers design can be more flexible when pressing the Stainless Steel Boat Canvas Snaps, And the vise clamping system allows you to obtain good leverage to press the two pieces together..
- 【A Better Snap Crimping Tool】Multiple application scenarios. You can use it to major or minor repair of canvas covers, tarps, boat covers. Our Snap fastener tool is your good helper!.
- 【Package Includes】1 Heavy duty pliers, 2 Interchangeable dies, A pair of non-slip gloves and Tape Measure. Our wish is to provide you with a perfect solution! YLINKM is a company that attaches importance to customer experience, and we will continue to do better. Thank you very much for your support!.
- 【YLINKM Sincere Service 】Our goal is to provide you with high-quality products. Any problems or after sales about our products, Please feel free....
Check StockArokimi Snap Fastener Kit,Metal Snaps Buttons with Fixing Tools 4 Color Clothing Snaps Kit for Clothing Leather Jacket Jeans Wear Bags Bracelet
- WIDE APPLICATION:These double cap rivets can be applied for DIY crafts or making clothes such as shirts, jackets, overalls, backpacks, shoes, hats,....
- MATERIAL: these press studs snap fasteners are made of stout copper with good quality and then plated other colors.
- PACKAGE: includes totally 100 set snap fasteners with 4 pieces fixing tools. Each fastener set includes 2 caps, a stud and a socket.
- USEFUL FIXING TOOLS: the punch tool help poke holes on the target products, then hammer and push the snaps on both side.
- EASY TO STORE:The button fastener kit comes with a clear plastic storage box and some small removable planks,We have that too! Be sure to select the....
Check StockAccoutrements Bigfoot Research Kit
- Flashing Buzzer with x5 different Bullshit sound effects and light which will be audible by the press of this button..
- Dimensions: Diameter: 7.5cm, Height: 5.5cm: Required Batteries: x2AAA (already included): Power supply.
- ge recommendation: For ages +3: Content:.
- Comes with an additional sticky tape velcro fastener for fixing..
Check StockThe Official BS Button
- Flashing Buzzer with x5 different Bullshit sound effects and light which will be audible by the press of this button..
- Dimensions: Diameter: 7.5cm, Height: 5.5cm: Required Batteries: x2AAA (already included): Power supply.
- ge recommendation: For ages +3: Content:.
- Comes with an additional sticky tape velcro fastener for fixing..
Check StockQualities of a Great Employee
- Flashing Buzzer with x5 different Bullshit sound effects and light which will be audible by the press of this button..
- Dimensions: Diameter: 7.5cm, Height: 5.5cm: Required Batteries: x2AAA (already included): Power supply.
- ge recommendation: For ages +3: Content:.
- Comes with an additional sticky tape velcro fastener for fixing..
Check StockColourPop Hocus Pocus Gather Round Sisters
- Flashing Buzzer with x5 different Bullshit sound effects and light which will be audible by the press of this button..
- Dimensions: Diameter: 7.5cm, Height: 5.5cm: Required Batteries: x2AAA (already included): Power supply.
- ge recommendation: For ages +3: Content:.
- Comes with an additional sticky tape velcro fastener for fixing..
Check StockShades of Blu
- Flashing Buzzer with x5 different Bullshit sound effects and light which will be audible by the press of this button..
- Dimensions: Diameter: 7.5cm, Height: 5.5cm: Required Batteries: x2AAA (already included): Power supply.
- ge recommendation: For ages +3: Content:.
- Comes with an additional sticky tape velcro fastener for fixing..
Check StockYou Got Jokes
- Flashing Buzzer with x5 different Bullshit sound effects and light which will be audible by the press of this button..
- Dimensions: Diameter: 7.5cm, Height: 5.5cm: Required Batteries: x2AAA (already included): Power supply.
- ge recommendation: For ages +3: Content:.
- Comes with an additional sticky tape velcro fastener for fixing..
Check StockThinking is Hard [Explicit]
- Flashing Buzzer with x5 different Bullshit sound effects and light which will be audible by the press of this button..
- Dimensions: Diameter: 7.5cm, Height: 5.5cm: Required Batteries: x2AAA (already included): Power supply.
- ge recommendation: For ages +3: Content:.
- Comes with an additional sticky tape velcro fastener for fixing..
Check StockFunny Squirrel Thank You Box of Cards
- Flashing Buzzer with x5 different Bullshit sound effects and light which will be audible by the press of this button..
- Dimensions: Diameter: 7.5cm, Height: 5.5cm: Required Batteries: x2AAA (already included): Power supply.
- ge recommendation: For ages +3: Content:.
- Comes with an additional sticky tape velcro fastener for fixing..
Check Stock