Best Pressed Steel Bearing

RLS5ZZ Shielded Bearing 5/8 x 1 9/16 x 7/16 inch Ball Bearings

• Single-row, deep-groove ball bearing for applications supporting high speeds, moderately heavy radial loads, and thrust loads in both directions.
• Small bearing for fitting small shaft diameters.
• Metal shields on both sides of the bearing keep the lubricant in and contaminants out.
• Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
• Normal radial internal clearance for applications where thermal expansion is not a factor.

NSK 6806DD 6806-2RS Made in Japan 30x42X7MM High Speed Bearings Deep Groove Ball Bearings

• Deep-groove geometry for high speeds and supporting both radial and axial loads.
• Single-row bearing for supporting radial loads.
• Normal radial internal clearance for applications that do not involve thermal expansion or atypical precision.
• Pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise.
• Shields on both sides of the bearing to keep lubricant in and contaminants out.

35mm Bearing UCF207 + Square Flanged Cast Housing Mounted Bearings

1-3/8\ Bearing UCF207-22 + Square Flanged Cast Housing Mounted

34 1/2' Hafele Table Legs Set of 4, Steel, Black

• Leg screws into the steel square mounting plate with an M10 bolt.
• Plastic levelers are pressed-in, they can be removed and pounded back in if legs need to be cut.
• 220 lbs per leg (100 kg) Static load bearing capacity.
• 34 1/2" High, including the mounting plate and the leveler.

Boston Gear PS315/16 Mounted Bearing, Pressed Steel Housing, 0.938\ Bore, 0.313\ Bolt Size

• Light duty flanged bearing with 3 bolt holes.
• Pressed steel housing for strength and durability.
• Deep groove ball bearings for high radial and thrust loads.
• Set screws for secure attachment to shaft.
• Lubricated at manufacturer for maintenance-free service.

Boston Gear PS211/8 Mounted Bearing, Pressed Steel Housing, 1.125\ Bore, 0.375\ Bolt Size

• Light duty flanged bearing with 2 bolt holes.
• Pressed steel housing for strength and durability.
• Deep groove ball bearings for high radial and thrust loads.
• Set screws for secure attachment to shaft.
• Lubricated at manufacturer for maintenance-free service.

Boston Gear PS211/16 Mounted Bearing, Pressed Steel Housing, 1.063\ Bore, 0.375\ Bolt Size

• Light duty flanged bearing with 2 bolt holes.
• Pressed steel housing for strength and durability.
• Deep groove ball bearings for high radial and thrust loads.
• Set screws for secure attachment to shaft.
• Lubricated at manufacturer for maintenance-free service.

MOOG ES3545 Tie Rod End

• RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer....
• GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
• ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
• PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and....
• STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.

MOOG ES3546 Tie Rod End

• RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer....
• GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
• ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
• PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and....
• STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.

MOOG ES3096L Tie Rod End

• RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer....
• GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
• ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
• PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and....
• STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.

MOCHU 725 725C/P5 5x16x5 Angular Contact Ball Bearing, ABEC-5, 15° Contact Angle, Metric, 5mm ID, 16mm OD, 5mm Width, Single Row, Open

• Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads.
• Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity.
• Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
• Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
• Normal axial internal clearance for applications where thermal expansion is not a factor.

MOOG K9802 Ball Joint

• PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
• STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
• ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
• RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life.
• EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.