Categories

Best Pressed Terminal

2) LANZAR MAX12D 12' 2000W Car Audio Subwoofers Subs Power Woofers DVC 4 Ohm

  • New Lanzar MAX12D 12" 2000W Car Subwoofer (Pair).
  • 1000 Watts Peak Power (2000 Watt per Pair).
  • Stamped Steel Basket w/Golden Input Terminal.
Check Stock

Lanzar MAX12 12 Inch 1000 Watt 4 Ohm Car Audio Power Subwoofer, 2 Pack | MAX12

  • Lanzar MAX12 1000 watt high output subwoofer.
  • Stamped steel basket with golden input terminal.
  • Features a bumped and vented motor structure.
Check Stock

2) New LANZAR MAXP154D 15" 4000W Car Audio Subwoofers/Subs Power Woofers DVC

  • New Lanzar MAXP15D 15" 4000W MAX PRO Car Subwoofers (Pair).
  • 4000 Watt Total Power Handling (2000 Watt Each).
  • Stamped Steel Basket w/Hex Key Input Terminal.
Check Stock

10 Set 6-Pin 5.08mm Pitch Male Female PCB Screw Terminal Block

  • Made of high quality carbon steel with nickel plating on the surface, durable..
  • Cross pan head screw, deep thread, no sliding teeth..
  • The square shaped gasket is firmly pressed..
  • Suitable for pressing and fastening switch, terminal block and other electrical appliances..
  • A set of 12, screw: M5X10, square pad 12X12..
Check Stock

JJHXSM 6pcs Flat Copper Braided Connecting Wire 11.8 feet Round Hole Braided Copper Ground Strap for High Voltage Equipment, Ground Lead and Shielding

  • 11.8 inch pure copper braided wire, high flexibility cable, braided wire specification: 6mm square.
  • Material: copper (T-2), non insulated braided wire.
  • Oxygen free T2 copper braided wire is adopted, and two ends are crimped with large diameter cold pressed terminals. Terminal specification: 6-8.
  • The minimum purity of copper is 99.9%, and the maximum resistance at 20 Centigrade is 0.017241 square millimeter/m.
  • It is used in flammable and explosive places to prevent the generation of power electricity and electrostatic sparks. The two flanges are reliably connected with metal with good conductivity to ground the pipeline and equipment.
Check Stock

Mardatt 32Pcs 9 Type Pluggable Terminal Blocks Connector Socket, 5mm/0.2inch Pitch PCB Mount Screw Male Female Connectors(2/3/4/5/6/7/8/9 Pins)

  • 【What you Get】The phoenix connector assortment contains 9 type of pluggable female and male terminal block: 6 pcs 2 pin terminal block, 6 pcs 3 pin terminal block, 5 pcs 4 pin terminal block, 5 pcs 5 pin terminal block, 2 pcs 6 pin terminal block, 2 pcs 7 pin terminal block, 2 pcs 8 pin terminal block, 2 pcs 9 pin terminal block, 2 pcs 10 pin terminal block, totally 32 pcs. Various type of screw terminal will meet your different demands..
  • 【Premium Material】Made of high-quality plastic and cooper, featured with good conductivity, effective flame retardant, long service time, safe and reliable. The screw have a better anti-oxidation performance which make it more durable. Repeatedly plug, not easy to deform..
  • 【Easy to Use】Not need to weld. Handy and easy to assemble, solder in easily and tighten very well on the terminated wires. Spiral wire is not easy to take off the line..
  • 【Wide Application】 The PCB terminal connector is ideal for small electronic watches, calculator, general computer, communication electronics device and other electronic equipment..
Check Stock

Hilitchi 12pcs 5 Positions Dual Row 600V 15A Screw Terminal Strip Blocks and 400V 10A Pre-Insulated Terminals Barrier Strip

  • ✅ Product Name: [1] 5P Dual Row Terminal Block Stripe.
  • [2] 12P Fork Type Terminal Stripe. Package Content : 6 x Barrier Terminal Block, 6 x Terminal Stripe (3 x Black,3 x Red).
  • ✅ [Terminal Block Stripe] 600V 15A, Material : Copper, Plastic. Our dual row screw terminal strips has a clear cover to protect accidental touching of the terminal. The shell can not break in an environment with low temperature, it is clean and beautiful with smooth surface. Safer when they are protested by the sell..
  • ✅ [Fork Type Terminal Stripe] 400V 10A, Material : Copper, PVC. With our terminal block, no more cluttered battery terminals anymore. Our terminal strips are well made sturdy and with quality and robust screws..
  • ✅ [NEAT WIRING JOBS]- The terminal blocks are easy to install and held in place by two screw holes at either end of the terminal. Bonus standard spade crimp type connectors work well and you have many options of of making individual connections or by using the whole barrier bar or part of it up to 12 connections to a single line..
  • ✅ [QUALITY AFTER-SALE SERVICE]: If you do not satisfy with our products or any questions, please come to us anytime. 12 hours quick response service. We promise to offer a satisfactory solution to all your problems..
Check Stock

Xiaoyztan 10 Pcs 12-Position Fork Type Terminal Jumper Block Wire Connector Barrier Strip 400V 12A (Black & Red)

  • PRACTICAL TERMINAL STRIPS - Our double row screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With Fixitok’s screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system..
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation..
  • HIGH QUALITY MATERIAL - The 4/5/6 positions terminal block strips are made from polycarbonate with flame retardance and nickel-plated copper with excellent electrical conductivity and anti-oxidation performance, to keep working stably and extend lifespan..
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide 3 kinds of terminal blocks (4/5/6 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. For 8/10/12 positions, please search for B08D3J19FT on Ama....
Check Stock

400Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connector Crimp Terminal Block Assortment Kit Golden with Insulating Sleeve for Electrical Wiring Car Audio Speaker N-002

  • Three types of gold flat terminal set (2.8mm, 4.8mm, 6.3mm male and female) total are used in toggle switch, speaker, horn, etc. This terminal set contains 480 products, 240 terminal insulated sleeves, 120 female insulated sleeve, and 480 total products. It is a fastel terminal that is always used for car, motorcycle, home center, wiring work, repair..
  • It is made of high quality brass, and it has good electrical conductivity and durability. This connection terminal set has a large number of male Messiah terminals and insulated male / female sleeve, so please use it in a safe manner..
  • The safety cover is attached to each of the male and female terminals. It is the terminal terminal set suitable for insulation such as electric wire, horn, general relay, etc. A flat terminal terminal is used for connecting horn, speaker, and general relay..
  • First, the insulated sleeve is connected to the wire, and then the female and the male terminal of the male are connected to the end of the cable. Please note: connect the wiring cord using a dedicated electrician pouch..
  • This terminal set (110, 50, 187, 40, 250, 30) comes with a plastic storage case, easy to carry and take out. It is widely applied to automobiles, motorcycles, transportation, machinery, distribution, el....
Check Stock

Terminal Strips, FIXITOK 6 Sets 4/5/6 Positions Terminal Block Strips Waterproof 600V 15A Screw Terminal Strips with 400V 15A Pre-Insulated Terminal Barrier Strip Jumper

  • PRACTICAL TERMINAL STRIPS - Our double row screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With Fixitok’s screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system..
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation..
  • HIGH QUALITY MATERIAL - The 4/5/6 positions terminal block strips are made from polycarbonate with flame retardance and nickel-plated copper with excellent electrical conductivity and anti-oxidation performance, to keep working stably and extend lifespan..
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide 3 kinds of terminal blocks (4/5/6 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. For 8/10/12 positions, please search for B08D3J19FT on Ama....
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 25A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 25A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 15A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 15A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

CGELE 6 Sets Terminal Blocks, 6Pcs 4/5/6 Positions 600V 25A Dual Row Screw Strip Block + Pre-Insulated Terminals Barrier 60Pcs Insulated Fork Wire Connector, 25A 4/5/6P+6 pcs Jumpers

  • ★【What You Get】 - In this terminal block set,it include 2pcs 4 positions/2pcs 5 positions/2pcs 6 positions 600V 25A double row screw terminal strip blocks with cover,6pcs 400V 25A pre-insulated barrier jumper strips,60pcs insulated fork wire connectors.Total 72pcs packed in a bag..
  • ★【Easy Install】 - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal.The fork terminal stripe can be cut in any position to meet with your different demand.You have the option of of making 4/5/6 individual connections or by using the whole barrier bar or part of it up to 4/5/6 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals..
  • ★【Heavy Duty】 - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. The shell is made with flame resistant material, more safer. Copper plate conductor has good electrical conductivity and also nickel plated has a better anti-oxidation performance which make it more durable..
  • ★【Protect Cover】 - Our double-row connecting terminal also includes a transparent cover to shield dust and protect the term....
Check Stock