Categories

Best Pressure Application

Wilkins 34-70XL Pressure Regulator

  • [Premium Material]: This pressure reducer valve is made of high quality brass, wear-resistant, not easy to rust.
  • [Compatibility]: High , and quick respond. Standard DN15(1/2 inch) thread is convenient for you to use.
  • [Adjustable Pressure Knob]: This pressure valve can bear the pressure of 1.6mpa. The pressure adjusting knob is on the top cover, which can be adjusted according to your needs.
  • [Piston Structure]: This pressure regulator adopts the piston structure, suitable for various kinds of environmental conditions, strong practicability.
  • Easy to connect with the tube, simple to use.
  • [Wide Application]: This water pressure reducer is applicable to hydraulic instability, water flow too fast, water purifier, solar energy, gas heater, faucet, etc.
Check Stock

Mein LAY Dual Gauge CO2 Regulator for Draft Beer Kegerators, CO2 Keg Pressure Regulator,CGA-320, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure with Safety Pressure Relief Valve

  • ✹【NO-Leaks & Easy Installation】： Each CO2 Beer Regulator Pressure Kegerator is supplied with 2 O-ring washers.The Quad-Ring Seal on the inlet nipple ensures that there are no leaks. CGA320 CO2 Pressure Regulator light weight, All you need to install this is an adjustable wrench..
  • ✹【Application】：Widely Application in Shop,Bar,Home,Out Door,Plants etc. Adjustment knob allows you to make quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures..
  • ✹【Brand Promise】：One year quality warranty for repair and profession lifetime tech support from us. If you have any questions ,please contact with us. We are happy to help you..
Check Stock

Fuel Line 3/8 Inch ID NBR Fuel Line Hose 6AN Push on Hose for Small Engine 10 Feet

  • Size: ID: 3/8" (10mm), OD: 5/8 inch (16mm), AN6 Fuel Hose, Length: 10FT..
  • Material: This small engine fuel line is made of high-quality NBR, which is oil resistant..
  • Working Pressure: 0.6Mpa, Burst Pressure: 1.8Mpa, Temperature Range: -40°F to 248°F..
  • Application: Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase..
  • How To Use: Use hose barbs and fuel line clamps to install..
Check Stock

EVIL ENERGY 3/8 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 25FT 300PSI

  • Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm)..
  • Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc..
  • Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase..
  • EVIL ENERGY provide 25ft 3/8inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..
Check Stock

Dial-N-Wash Adjustable Pressure Washer Regulator (82232)

  • Convenient, adjustable pressure regulator.
  • Select correct pressure for the cleaning application.
  • Adjust pressure from 1000 PSI to Max PSI with a simple twist.
  • Universal to fit most gas pressure washers up to 4200 PSI.
Check Stock

Tool Daily Pressure Washer Sandblasting Nozzle Tip, Replacement Wet Sandblaster Attachment, 5000 PSI, 2-Pack

  • ATTENTION: Replacement pressure washer sandblasting tips are designed only for Tool Daily 5000 PSI sandblasting kit..
  • The pressure washer sandblast tip includes 2 ceramic nozzles..
  • Working pressure of pressure washer sandblaster tips is up to 5000 PSI. Temperature is up to 140°F/60℃..
  • Sandblasting nozzle for pressure washer is suction-fed injection of sand into water system..
  • Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease. Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

M MINGLE Pressure Washer Adapter Set, Quick Connect Gun to Wand, M22 14mm to 1/4 Inch

  • APPLICATION: SEE IMAGE 2. CONVERT M22 to 1/4'' FITTING. Quick connect gun to wand or nozzle. Connect M22 male thread to pressure washer gun and connect M22 female to wand..
  • ATTENTION: M22 14 fitting has 14mm inside diameter, ■NOT 15 mm■. Please see image 3 and measure the inside diameter of your application..
  • Universal Quick Connect Kit, Metric M22 14mm male thread + 1/4’’ quick disconnect socket, 1/4’’ plug + M22 14mm female..
  • High replacement couplers provide secure and quick fittings, easy to connect and disconnect. Max. Pressure is up to 5000 PSI..
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

STYDDI Pressure Washer Spray Nozzle Tip Set with 5 Multiple Degrees Nozzle and 2 Second Story Nozzle, 7 Pack, 1/4\ Quick Connect, 2.5 GPM, Rated Up to 4500 PSI

  • WIDER & LONGER RANGE OF SPRAY PATTERNS THAN STANDARD SPRAY TIPS: 7 different spray angle tips meet your needs in different situations, such as watering flowers and plants, washing car, and can be attached to a quick-connect wand for swifter application and more. Two JET STREAM 2nd story pressure washer tips with rinse and soap mode reaches much farther than standard spray tips. Long range nozzle reaches the second floors..
  • FIT MOST LEADING BRANDS: Universal pressure washer accessories fit most leading brands such as Sun Joe, AR Blue, Simpson, Greenworks and more. Each easy fitting nozzle tip is designed for usage on a different outdoor surface..
  • 7 DIFFERENT SPRAY ANGLES & MODES MAKE HARD-TO-REACH AREAS EASILY. Spray Nozzle Tips set includes four high pressure stainless steel quick connect spray nozzles (Red nozzle tip 0°, Yellow nozzle tip 15°, Green nozzle tip 25°, White nozzle tip 40°), one low pressure spray nozzle (Black soap nozzle tip 65°) and two jet stream tips (Blue tip for rinse mode, Pink tip for soap mode). Choose different angles spray nozzle according to the actual need..
  • 1/4'' QUICK CONNECTION DESIGN & SUPPORT UP TO 4000 PSI: Attached to a 1/4 inch Quick-Connect Wand for swifter application and more. Perfect for almost all brand of p....
Check Stock

Karcher G3200 X 3200 PSI Axial Pump Gas Power Pressure Washer with 4 Nozzle Attachments - 2.4 GPM

  • ...g Options: Includes a M22 trigger gun and zinc plated spray wand with 4 quick-connect spray nozzles. Use the 40-degree nozzle for light-duty jobs, the 25-degree for all-around cleaning, and the 15-degree nozzle for superior cleaning performance on tough-to-clean surfaces. Comes with a 65-degree nozzle for detergent application. Also compatible with most universal 1/4" quick-connect pressure washer accessories.
  • High-Pressure Hose: Comes equipped with a generous 25' kink-resistant high-pressure hose that offers plenty of reach, as well as an onboard hose wrap for simple storage.
  • Onboard Detergent Tank & Storage: Features 1 (.5 gallon) onboard removable detergent tank and detergent suction hose for easy soap application, and also has an onboard storage bin for accessories.
  • Karcher Warranty: Backed by a 3-year Engine/2-Year Pump limited warranty and industry-leading rapid exchange program, Karcher pressure washers offer high-powered performance and unparalleled ease of use.
Check Stock

Toolly Pressure Washer Sandblaster Kit, Sandblasting Attachment, 1/4 Inch Quick Connect or Compatible with Karcher Adapter, 2500PSI

  • ▲Fits most pressure washer which has 1/4’’ quick connect at the end of gun. Also fit Karcher K series pressure washer, such as K2, K3, K4, K5, K6, K7. The adapter for Karcher is attached..
  • ▲Pressure washer sandblaster attachment injected sand into water system by suction..
  • ▲Max pressure of wet sand blaster for pressure washer is 2500 PSI. Max Temperature is 140°F/60℃..
  • ▲Application: pressure washer sandblasting attachments is ideal for abrasive cleaning. Such as removing rust, paint, graffiti, baked on grease. Pressure washer sand blasting attachments use baking soda, dry silica sand or washed and dried river sand..
  • ▲The pressure washer sandblaster kit has adapter for Karcher, 10’ hose, 16’’ pressure washer wand, 10’’ sand wand, nozzle and a goggle. The pressure washer wand and sand wand are input while the nozzle is output..
Check Stock

Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

  • Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sand blaster Attachment, 2500 PSI”..
  • The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps..
  • Replacment Nozzles are available. Product “Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack”. Working pressure of pressure washer sand blaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃..
  • Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

3/8 Inch (10mm) ID Fuel Line Hose 10FT NBR Neoprene Rubber Push Lock Hose High Pressure 300PSI for Automotive Fuel Systems Engines

  • 【Size】ID: 3/8" (10mm), OD: 2/3" (17mm), Length: 10FT..
  • 【Working Conditions】NBR Fuel Hose Working Temperature Range: -40°F to 257°F. Working Pressure: 300PSI. Burst Pressure: 1160PSI..
  • 【Premium Material】Made of premium NBR materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection..
  • 【Applicable Medium】NBR Fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air, etc..
  • 【Wide Application】NBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase..
Check Stock

Air compressor pilot unloader valve with muffler Vent Rolair 131B 125-150 psi

  • ✅【Product Description】This is a pressure switch, control valve with a single port connection manifold. Air compressor pressure switch is similar to the regular single port pressure switch, but this switch is equipped with heavy duty 26A contacts to provide a longer lasting switch in demanding applications..
  • ✅【Pressure Switch Features】Air compressor switch is a universal pressure switch replacement, convenient to replace the broken one..
  • ✅【Excellent Material】100% Brand new and high quality. Pressure switch control valve is Made of high quality material, with long mechanical life..
  • ✅【Specifications】Type: pressure sw....
Check Stock