Categories

Best Pressure Gauge Condensate Pump

FUJIWARA Condensate Pump Mini Split Automatic Condensation Drain Removal Quiet Pump,for HVAC,Air Conditioner,Dehumidifier,Furnance,Ice Maker,Suitable for A/C 1-5HP 3700W FUJ—40S

  • ◆【Mini EXQUISITE DESIGN CONDENSATE PUMP&PLUG CONNECTION】: Mini Split Automatic Condensation Drain Pump,Suitable for A/C 1-5HP（3700W）....
  • ◆【SUPER QUIET & QUIET ENERGY-SAVING 】: This automatic condensate pump adopts 100-220V wide voltage design, 3w power and energy saving and....
  • ◆【APPLICATION RANGE】: Mini Split Automatic Condensate drain pump professional design for HVAC,Air Conditioner,Dehumidifier,Furnance,Ice....
  • ◆【PROBE INDUCTION, AUTOMATIC EXCLUSION WATER】: The new probe induction technology was applied replace the original float induction,which avoids....
  • ◆【 CONFIDENT WITH PRODUCTS QUALTY】: Any of your sincere feedback for condensate pump are welcomed.And we will try our best to solve....
Check Stock

220V Self Priming Water Pump Pressure Switch Automatic Pressure Controller Black

  • What you will get: you will receive 1 piece of 2 inch, 1/4 inch NPT water pump pressure gauge, 1 piece of 1/4 inch NPT female thread 1/2 inch male threaded brass fitting and 1 piece of tape, a total of 3 accessories for swimming pool pressure gauges, they are indispensable accessories for swimming pools and other equipment.
  • Clear and accurate reading: this water pump pressure gauge has a clear surface and accurate reading, it can provide accurate readings in the range of 1 to 100 psi and 0 to 7 bar for pumps, it is equipped with a 2 inch dial, is a practical tool for detecting water pressure.
  • Reliable material: this pump pressure gauge and 1/4 inch NPT internal thread x 1/2 inch external thread joint are made of brass, not easy to wear, comfortable texture, durable, the surface of this gauge is made of plastic which allows you to see clearly to the reading and pressure range, and use the tape when installing the pressure gauge to prevent leakage.
  • Brass fitting size: NPT thread size is the correct size and does not represent the actual diameter, 1/4 inch NPT internal thread x 1/2 inch external thread brass fitting can be applied to connect the pressure gauge, it is ideal to use the tape to make installation more stable.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

SANIFLO Sanicondens Condensate Pump - Residential & Commercial

  • PUMP, PUMP & AWAY: The Sanicondens is a small pump used to pump condensate from condensing boilers, HVAC systems, water heater systems, etc. The Sanicondens will pump condensate waste up to 15 feet in height and/or 150 feet away from a soil stack..
  • READY TO GO: The powerful pumping unit can be floor or wall mounted. It comes with an already-to-wire connection to an external overflow switch that will shut down the appliance or alert of overflow and includes all necessary hardware for install..
  • SMALL BUT POWERFUL: One of the most powerful and quiet condensate pumps on the market with features that will ensure your appliances will remain in a healthy state with minimal maintenance..
  • TECHNICAL SPECIFICATIONS: Motor: 1/30 HP oil-filled thermally protected.
  • Connections: Condensing boiler, HVAC systems, air conditioners.
  • 3 YEAR WARRANTY: All of Saniflo's products have a 2 year warranty with purchase, and an extended year with registration. Our warranty program can offer peace of mi....
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27....
Check Stock

Regulator Gauge High Uniweld Nitrogen For Rhp400

  • The Nitrogen Sludge Sucker and Blaster Kits are specifically designed for multiple uses in the HVAC/R industry (Tank Not Included – Sold Separately).
  • Nitrogen Regulator with protective rubber gauge boots - Maximum Delivery Pressure up to 400 PSI.
  • Purging copper lines with low pressure nitrogen displaces the oxygen, preventing oxidation and the resulting scale.
  • Pressure testing a system for leaks prior to evacuating and charging will save time and money.
  • Cleaning a condensate drain line is easy with a Sludge Sucker or Sludge Blaster.
Check Stock

VEVOR Condensate Pump, 6.6 ft/2 m Lift, 110V Removal Drain Pump with 0.63 Qt/0.6 L Water Tank, 5W Automatic Condensation Pump with 100 L/H Flow, for Ice Maker Air Conditioner HVAC Dehumidifier Furnace

  • 0.6 L Water Tank & Efficient Flow: Our condensate pump features a 0.63 Qt (0.6 L) water tank, sufficient to hold the amount of water that needs to be discharged from your ice machines. The water flow rate reaches 105.67 Qt (100 L) per hour to ensure efficient & timely drainage. Thus, a dry environment can be provided for the ice cubes, and you don't need to worry about them melting too fast..
  • 6.6 ft Lift for Different Heights: Our condensate removal pump has a high water lift of 6.6 ft (2 m), from the comfort of which it can be connected to commercial ice makers or air conditioners of varying heights. You can place it right on the floor or tabletop and hang it on the wall..
  • 5W Motor & Low Noise Running: A 5W motor is equipped on our compact condensate pump (7.1"x3.9"x2.6" / 180x100x66 mm in dimensions). The sound volume is about 22 dB, boasting high performance but low noise (p.s. the normal conversation volume is 40-60 dB). It will not disturb your daily life. Besides, the ventilation holes dissipate heat quickly, and the dampening feet decrease noise and enhance its stability..
  • Plug and Play with Power Cord: Our condensate pump is designed with automatic work and stop. When the water inside reaches the lower probe, it will start working.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 mal....
Check Stock

Schwinn Gust Max Foot Pump, 100 Max PSI, for Schrader and Presta Valves

  • Large Accurate Gauge: Vibrelli’s bike pump with gauge is built and tested for high pressure precision. The bicycle pump pressure gauge is large, accurate, and easy to read..
  • Rapid T-Valve: Presta valve bike pump also inflates Schrader valves, with a simple flick of a switch. The “Rapid T-Valve” on the bike tire pump seals strong with no annoying leaks.
  • Inflates to 160 PSI: With a strong steel barrel and reinforced handle, Vibrelli’s bicycle tire pump is tested for accuracy to high pressure, it’s the perfect road bike pump.
  • Includes: Bike air pump comes with an Emergency Glueless Puncture Kit, so you don’t get caught on the road or trail with a flat! Includes ball inflation needle and valve for inflatable devices, so you can use your bicycle pump for pool toys and sports bal.
Check Stock

Little Giant EC-400, 2.5 GPH In-Pan Condensate Removal Pump (115V)

  • Product 1: CONDENSATE REMOVAL PUMP: Little Giant Automatic Condensate Pump features safety switch, 1/2-gallon ABS plastic tank, and 6 ft. power cord.
  • 1/30 HP pumps 80 gallons of water per hour.
  • Product 1: AUTOMATIC HVAC PUMP: Ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where automatic drain pump is required.
  • Product 1: STAINLESS STEEL MOTOR SHAFT: Vertical-type pump features stainless steel motor shaft and galvanized steel tank cover.
  • Thermally protected motor is UL and CSA listed.
  • Includes two 1-1/8” diameter inlet openings.
  • Product 1: PUMP WITH SAFETY SWITCH: Includes safety switch which can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • Discharge is a 1/4" FNPT or 3/8" O.D. barbed tubing adapter.
  • Product 2: SimpleAir’s Clean Flow Tabs are a simple method to maintain free-flowing drain lines associated with all HVAC systems.
  • Product 2: Unique tablets are time released when water activated.
  • Product 2: Tabs prevent common growth in drain lines that could lead to clogging of drain lines and overflow.
Check Stock

Little Giant 554201101 80 GPH 115-Volt Low Profile Automatic Condensate Removal Pump with Safety Switch White VCCA-20ULS

  • LOW PROFILE CONDENSATE REMOVAL PUMP: the low tank height allows the pump to be used where other condensate pumps will not fit.
  • AUTOMATIC CONDENSATE REMOVAL: designed for the collection and removal of condensate from air conditioners, refrigerators and dehumidifiers.
  • Suitable for high effiency condensing furnaces and boilier equipment.
  • CHECK VALVE INCLUDED: includes 1/4-turn, twist-off locking check valve discharge adapter for 3/8-in. ID tubing and an additional adapter for 1/4-in.....
  • SPECIFICATIONS: 1/30 HP, 80 GPH at 1-ft. head, 20-ft. shutoff.
  • Max PSI = 8.6, 6-ft. cord, 1.5 Amps, 93 Watts, cCSAus listed.
Check Stock

Jabsco Flexible Impeller Ac Motor Pump Units - Type: Service Kits - Type: for Model 6050-00

  • Replacement switch fits Little Giant CVCMA-20ULST & VCMA Series, PartsConnect PCP115, Wayne Reliant 189246, Beckett CB series, Liberty Pumps LCU series, Diversitech CP seriies, Sid Harvey 397-112, and other condensate pumps.
  • Replace Zing Ear G606 or Crouzet 83133169 switch.
  • Includes instructions, help, and hints on how to replace your pump switch. Warranty: 3 years replacement..
  • Single Pole, on/off latching switch. Push the lever down with half an ounce of force, and it turns on. Up for off. Latching microswitch with just the right amount of overshoot (hysteresis) for the float in your condensate pump.
  • Please don't be stupid: TURN OFF ALL ELECTRICITY AND DISCONNECT ALL POWER BEFORE YOU FOOL WITH YOUR CONDENSATE PUMP!.
Check Stock