Categories

Best Pressure Generator

ZRDR CO2 Generator System Carbon Dioxide 2L with Dual Gauge Display Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium Stable Output

  • PROFESSIONAL FACTORY - We are a manufacturer specializing in CO2 generator system. Our CO2 generator system is made of 304 stainless steel, far better....
  • SAFE PROTECT - Automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V....
  • REFINE THE BUBBLES - OUR CO2 generator system equipped with the atomizer, refine the bubbles and make it easy to dissolve in water and be absorbed by....
  • LOW COST - Generates CO2 on your own: you only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the....
  • COMPLETE ACCESSORIES - steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply,....
Check Stock

wonofa Water Flow Generator Turbine Generator Hydroelectric Micro Hydro Generator 1/2 Inch Portable Water Charger 10W 12V

  • Micro hydro generator, the potential energy conversion of the water into electrical energy mechanical equipment.
  • High UV and water resistance for a long life,the life of generator:more than 3000h.
  • Appearance: generator surface cleaning, no corrosion, the structure is strong.
  • Output characteristics: the output voltage with no voltage regulator is proportional to the water pressure.
Check Stock

The Little Green Change DIY CO2 Aquarium Plant System Kit - Generator Aquarium Moss Plant D201 Tube Valve Guage Bottle Cap with Needle Valve Pressure Gauge for Aquarium Water Plant Tank

  • ▪CO2 Generator:▪ AS an indispensable role in the photosynthesis of aquatic plants, this CO2 generator main for provides a genuine environment for....
  • ▪Application▪ Easy to operate and designed for low cost planted tank use,to provide your aquarium plants an abundant CO2 environment for better....
  • ▪Advantage▪ This CO2 Generator System Kit is with Pressure gauge for pressure display, gas adjustable function, and simple pressure relief, easy....
  • ▪Material▪ The CO2 DIY kit is with ABS engineering plastic cover, with a locking pipe device to ensure non-deformation, non-loose, non-slip wire....
  • ▪Note:▪ Make sure carefully observe the direction of the parts before assembly.
  • The usual wrong handle way will cause abnormal reaction components....
Check Stock

Clock Generators & Support Products 3-PLL Clk Syn IND (100 pieces)

  • Broad for Using: Can be flexibly applied in electronics, component, assembly, automotive, machine, equipment and so on..
  • Easy to Install: Comes with a light weight and a compact size as well, the vacuum generator is very convenient to install..
  • Great in Design: Adopting aluminium alloy housing and brass nozzle with 1.0mm diameter, not easy to deform and very durable..
  • Firm Connection: Fine thread ensures firm connection without leakage, which will facilitate negative pressure and ejection..
  • Efficient Works: Works stably under 4.5-5bar pressure, the vacuum generator enables larger air volume and higher efficiency..
Check Stock

276-62304-60 Carburetor for Robin Subaru EX13 EX17 EX21 SP210 Generator Carb 276-62304-20 276-62304-40

  • The Carburetor Only fits EX13 EX17 EX21 Generator, don't fits EX13 EX17 EX21 Lawmower Pressure Washer Engines..
  • Fits for Robin Subaru EX13 Generator EX130D20041, EX130D20051 , EX130D20141 , EX130D20151 , EX130D20230 , EX130D52090 , EX130D52091 ..
  • Carburetor for Robin Subaru EX21 SP210 Generator ..
  • Replaces part number 276-62304-40, 276-62304-20, 276-62304-60, 278-62314-30, 278-62314-20, 278-62314-10.
Check Stock

Zerodis Aquarium CO2 Generator, DIY Aquarium Planted Tank CO2 System Kit Tube Valve Guage Bottle for Aquarium Moss Plant Tank

  • co2 diffuser.As an indispensable role to the photosynthesis of water plants, this CO2 generator main for provide a real environment for plants’ growing.diy co2 kit.
  • aquarium co2 system.The pressure principle push the acid liquid into the small soda liquid,the two liquids reacting to produce continuous carbon dioxide.co2 aquarium kit.
  • aquarium tools.The CO2 DIY kit is with ABS engineering plastic cover, with locking pipe device to ensure non-deformation, non-loose, non-slip wire when working.And it’s with professional metal material gas adjusting valve to ensure pure CO2 DIY.diy co2 aquarium kit.
  • This CO2 Generator System Kit is with Pressure gauge for pressure display,gas adjustable function,and simple pressure relief, easy to operate, safe and practical advantages! Once start, sustainable gas supply!co2 regulator adapter.
  • Trimming valve regulation avoid by sudden big or small, can’t suddenly turn up, after immediately shut down again, so as not to cause abnormal pressure to the bottle.co2 diffuser.
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • [Professional Factory]We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • [Safety First]Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • [Refine The Bubbles]Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • [Low Cost]You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • [Complete Accessories]Steel bottle, Stainless steel pressur....
Check Stock

QAZAKY Carburetor Compatible with Coleman Powermate 5000 5550 5600 6200 6250 8550 8600 Watts 342cc 10HP Engine Gasoline Generator 030235 Troy-Bilt GenPower 305 Craftsman Nikki 216100

  • ✪ 100% brand new and high-quality carburetor, widely used on many lawn mowers, vintage mini bikes, snow blowers, snow throwers, pressure washers,....
  • ✪ Compatible with Coleman Powermate 5000 5550 6200 6250 8550 Watts 10HP gasoline generator 030235, Craftsman 5600 Watts 8600 Surge Watts Generator....
  • ✪ Replaces Generator with a 342cc engine (216100 series). Compatible with models: 1450 Series Engine Craftsman Nikki 591378 598305 ​694952 695328....
  • ✪ Package includes: 1 x carburetor. 1 x carburetor cleaning brush. 3 x choke levers. 2 x mounting gaskets. 1 x fuel shut off valve. 1 x spring. 1 x....
  • ✪ All of the original “QAZAKY” parts are backed by 180 days’ carefree return, BUY WITH CONFIDENCE!.
Check Stock

Hilitand CO2 Generator, DIY CO2 Aquarium Plant System Kit, D201 Pro Tube Valve Gauge Bottle Cap Kit, for Aquarium Moss Plant

  • 【CO2 Generator System】As an indispensable role to the photosynthesis of water plants, this CO2 generator main for provide a real environment for plants' growing..
  • 【Equipment Principle】The equipment uses an irreversible chemical of strong acid and strong base to produce CO2 gas. The pressure principle push the acid liquid into the small soda liquid,the two liquids reacting to produce continuous carbon dioxide..
  • 【Note】The bottle must be carbonated beverage bottle, do not use pulpy, green tea, mineral water bottles, etc.Trimming valve regulation avoid by sudden big or small, can't suddenly turn up, after immediately shut down again, so as not to cause abnormal pressure to the bottle..
  • 【Package List】Package includes 1 x Pressure gauge, 2 x Bottle Caps, 1 x Needle Valve and Tubes for easy installation, please make sure carefully observe the direction of the parts before assembly..
  • 【Guarantee】If you have any quality problems, please feel free to contact us, we will provide you with a satisfactory solution, please feel free to buy without any worry..
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • Professional Factory - We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • High Capacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • Complete Accessories - steel bottle, Stainless steel pressure reducing....
Check Stock

Tefola Ozone Generator Integrated, Poratable Air Purifier, Ceramic Plate Air Purifier Industrial Ozonizer Machine 15G for Home Refrigerators Office(AC110V)

  • The ozone generator is suitable for dryers, dishwashers, refrigerators, electronic shoe cabinets, air filters, etc..
  • This air purifier benefits from high pressure. Please use dry air or oxygen in the air as the original material for ozone generation..
  • The ceramic ozone generator is made of aluminum alloy and ceramic composite material, it is anti‑falling, shockproof and has a longer service life..
  • This integrated plate air purifier uses an upgraded micro‑gap medium beehive discharge technology. The industrial ozone generator has low power consumption, so it will help you save power..
  • 100% Satisfaction Guarantee: We focus on the needs of our customers, with the aim of providing customers with high-quality product tools and the most comfortable experience. If there is a problem with the product, please communicate with us in time..
Check Stock

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve for Aquarium Plants Tanks

  • PROFESSIONAL! Professional CO2 generator system with SUS304 stainless steel bottle, regulator, bubble counter, safety valve. Far better than simple plastic bottle generators: more reliable, steady, durable, efficient..
  • SAFE! The bottle body adopts 1.5mm thickness SUS304 stainless steel(more 25% thickness than normal 1.2mm), blasting pressure up to >80kg/cm2(1137PSI), Safety valve will open automatically when it exceeds the safe pressure..
  • NEEDLE VALVE WITH BUBBLE COUNTER! Together with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter with check valve function, stop water backflow to bottle. Aquarium specific needle valve, High precision fine-tuning easy for co2 to be 1 bubble in 3 seconds..
  • OPTIONAL MINI DC 12V SOLENOID! You can choose a 12V DC solenoid valve with the generator, will automatic turning on/off CO2 output with timer..
  • ATTENTIONS: Solenoid NOT included, need order seperately..
Check Stock