Categories

Best Pressure Plasma System

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • ...conversion plug, which can be plug and play in different environments..
  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapter, Air Filter Regulator, Protective Mask and Gloves, Consumables, Instruction Manual, Etc. (Ceramic Cup, Ceramic Ring, Hose Clamp, Electrode, Bolt, Nozzles, Throat Hoops, etc.).
Check Stock

Plasma Cutter Machine,MYYWELD Dual Voltage 110/220V 50A，Portable Air Plasma Cutting Equipment Max Cutting Thickness 15mm,IGBT Inverter 1/2\ Clean Cut, High Frequency Cutting

  • ...examples. With mild steel, operators will experience faster, thicker cuts than with alloys..
  • Dual Voltage-Automatic Dual Voltage / Dual Frequency (110 V/220 V 50/60Hz). Voltage compensation function to deal with fluctuation of the power network..
  • Safe & Protection- Beautiful plastic panel design. With over-heat, over-pressure, over-current and IP21 level protection, the cutting machine works in a more safer and professional way. Should the plasma cutter be used to an excessive level, or in high temperature environment, poorly ventilated area or if the fan malfunctions the Thermal Overload switched on to cool down inside temperature. The machine will be able to run again when the internal temperature reaches safe level..
  • High Efficient & Widely Application- Latest IGBT invert technology, equipped with high quality PT31 cutting torch. Fast cutting speed, low noise, and smooth cut just like a hot knife cutting on the butter. Available for cutting most metals: stainless steel, alloy, aluminum, mild steel, carbon steel.
  • widely used for automotive, ducting work, repair/maintenance, metal processing, manufacture..
  • Accessories-User guide, 1pcs PT31 cutting gun(5M), 1pcs ground clamp(2M), 1pcs transparent hose(3M), 1pcs conversion line, 4pcs hose clamp, 2pcs elec....
Check Stock

Reboot Plasma Cutter 45 Amp IGBT Inverter RBC4500 AC 220V Air Plasma Cutting 1/2 Clean Cut 15MM Max Cutting High-Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron

  • [Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
  • [Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
  • [Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
  • [Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • [Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....
Check Stock

Serious Skincare Creamerum Body Beauty Treatment Large 8 Oz Tube

  • SKIN CONDITIONING – C3 Plasma C Serum Vitamin C Ester Skin Conditioner helps to brighten, hydrate and improve the look and feel of elasticity in the skin, while diminishing the appearance of fine lines and wrinkles on the face and neck..
  • VITAMIN C ESTERS – More stabilized than the original Vitamin C nutrient, the C ester can easily penetrate more deeply into the skin and has less potential for breakdown due to environmental exposure. Vitamin C Ester has the ability to deliver higher concentrations of vitamin C to ensure the skin’s surface is brighter and smoother, while diminishing the look of dark spots and discolorations..
  • HYDRATING – BRIGHTER - SMOOTHER SKIN - Rejuvenates dry skin as it visibly hydrates, brightens and softens fine lines and wrinkles with hydration binding ingredients. As part of a daily skincare regimen, the C3 Plasma C Serum Vitamin C Ester Skin Conditioner optimizes the look and feel of your skin..
  • C3 PLASMA BIO-TECHNOLOGY - Our Serious-C3 Plasma line features our patented delivery system of groundbreaking vitamin C technology. C esters, C3 plasma and two patented delivery systems come together to offer their best weapon against the most noticeable markers of age: visible lines, wrinkles, discoloration, dry and dull skin. T....
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness under the rate 220V 55Amps 60-75PSI, The cutting result may different depend on different voltage current and air pressure.
Check Stock

newoer 5.5 Inch Plasma Ball Lamp Santa Claus Magic Plasma Ball Lamp - Touch Sensitive Interactive USB or Battery Powered Plasma Globe Lamp for Decorations Bedroom Parties Prop Bedroom Christmas Gifts

  • ...ace your fingers on the glass surface and watch as colored bolts of glowing light follow your every move. You can actually "feel" the energy as the light gently tickles your fingertips..
  • MULTI-FUNCTIONThe plasma globe lamp uses electrostatic induction, and the electron beam beats with your hand.which can relieve the pressure in your life and work. Plasma balls can also be used as props and toys for photos, videos.and other types of creative performances. Children can pretend to be the mad scientists of this ball.It's Can be given as a Christmas gift for children or family..
  • PLEASED GIFTThe most interactive Christmas or Birthday gift you could give your child | Encourages touch-activated, interactive play and scientific learning.
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ...ent higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-15seconds ,this function allow user adjust the time for post air to cool torch head effectively provide cooling, and extend the working life of consumables..
  • ✅【Warranty Service】We are a manufactory with 10 years' experience of professionals producing the plasma cutter machines,the buyer ....
Check Stock

Amico AG-60 60-Amp/13-Feet Plasma Cutter Torch For CUT-30/40/50 APC-30/40/50 CUT-45M/55M CTS-160/180/200

  • The handle is designed ergonomically, allowing for long-term use due to the comfort and safety of the item. The design is elegant, flawlessly....
  • AG-60 is professional high-quality plasma cutting torch gun with excellent cutting results. The torch head is made of high-quality materials and is....
  • The characteristics of the AG-60 plasma cutting are fast cutting speeds, high precision, small cutting gaps, and small thermal deformation. The....
  • The length of the AG-60 cutting gun is 13 feet and the rated current is 60 amps. It can withstand a tracheal pressure is 250 psi. The maximum cutting....
  • AG-60 is designed for the AMICO ELECTRIC plasma cutting machines: CUT-30/40/50, APC-30/40/50, CTS-160/180/200 and CUT-45M/55M. Complementary parts:....
Check Stock

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

Amico PT31-13 13 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 13 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT31-25 25 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 25 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT31-15 15 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 15 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock