Categories

Best Printfile 35mm Negative Sleeves

DNM Mountain Bike Air Rear Shock with Lockout 190mm

  • ...justment Knob +direction Rotation Increase Damper (Slow),- Direction Rotation, Decrease Damper (Fast). Compression Adjuster + Direction Rotation Lock-out,- Direction Rotation Open Up.main Air Chamber Supply Air Pressure According To Pressure Meter.
  • Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Negative air chamber 65 Psi.Weight 200 lbs - Main air chamber 150 Psi, Negative air chamber 70 Psi.Weight 220 lbs - Main air chamber 165 Psi, Negative air chamber 75 Psi..
  • DNM QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund Or A Replacement On Your Purchase! We’re Also Here To Support You If You Have Any Questions Or Queries, Please Get In Touch And We’ll Gladly Help..
Check Stock

DNM Mountain Bike MTB Air Rear Shock Rebound/Remote Lock Out/Air Compression Pressure Adjustable AL 7075 Shaft/AL 6061 Shock Body 165mm Travel 35 mm/w Extra Bushing Hardware

  • FINE-TUNING ADJUSTMENTS: This air-sprung shock equips with multiple compression adjustment options: main and negative air chamber valves.
  • rebound adjustment knob and handlebar-mounted remote lock out which helps get better experience while riding on different terrains..
  • PRODUCT SPECIFICATION: Damper shaft : dark hard-anodized AL-7075 Ø 10 mm (0.39 inch) shaft. Dark hard-anodized AL-6061 shock body. Available sizes: Eyelet to Eyelet x Stroke 152 x 28 mm (6 x 1.1 inch).
  • 210 x 53 mm (8.27 x 2.09 inch). Weight: 267g =0.58lbs (152mm).
  • 308g =0.68lbs (210mm). Remote lock out cable length: 1750mm=68.9inch..
  • COURTESY BUSHING HARDWARE INCLUDED: Top Busing Size : 8mm x 24mm. Bottom bushing size : 8mm x 24mm. We have included an additional set of bushing hardware (8mm x 50mm) to fit bikes with different suspension systems..
  • Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Ne....
Check Stock

DNM Damping 3 System Mountain Bike Air Rear Shock Rebound/Lock Out/Air Pressure Adjustable AL 7005 Shark/AL 6061 Shock Body 165mm (6.5\) x 35mm

  • ...justment Knob +direction Rotation Increase Damper (Slow),- Direction Rotation, Decrease Damper (Fast). Compression Adjuster + Direction Rotation Lock-out,- Direction Rotation Open Up.main Air Chamber Supply Air Pressure According To Pressure Meter.
  • Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Negative air chamber 65 Psi.Weight 200 lbs - Main air chamber 150 Psi, Negative air chamber 70 Psi.Weight 220 lbs - Main air chamber 165 Psi, Negative air chamber 75 Psi..
  • DNM QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund Or A Replacement On Your Purchase! We’re Also Here To Support You If You Have Any Questions Or Queries, Please Get In Touch And We’ll Gladly Help..
Check Stock

DNM Damping 3 System Mountain Bike Air Rear Shock Rebound/Lock Out/Air Pressure Adjustable AL 7005 Shark/AL 6061 Shock Body 200mm (7.87") x 55mm

  • ...amper (Slow),- Direction Rotation, Decrease Damper (Fast). Compression Adjuster + Direction Rotation Lock-out,- Direction Rotation Open Up.main Air Chamber Supply Air Pressure According To Pressure Meter.
  • Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Negative air chamber 65 Psi.Weight 200 lbs - Main air chamber 150 Psi, Negative air chamber 70 Psi.Weight 220 lbs - Main air chamber 165 Psi, Negative air chamber 75 Psi..
  • DNM QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund Or A Replacement On Your Purchase! We’re Also Here To Support You If You Have Any Questions Or Queries, Please Get In Touch And We’ll Gladly Help..
Check Stock

HP Scanjet 5590 Document Scanner

  • Scan media types: Paper (banner, inkjet, photo, plain), envelopes, labels, cards (greeting, index), 3-D objects, 35 mm slides and negatives (using transparent materials adapter),iron-on transfers.
  • Features: 50 sheet Automatic document feeder (two-sided), Transparent materials adapter: scans three slides or four 35 mm negative frames.
  • 48-bit color depth, 256 levels of grayscale.
Check Stock

ZONOZ FS-3 22MP All-in-1 Film & Slide Converter Scanner w/16GB SD Memory Card, Speed-Load Adapters for 35mm, 126, 110 Negative & Slides, Super 8 Films - Worldwide Voltage 110V/240V AC Adapter (Blue)

  • ZONOZ FS-3 22MP All-in-1 Film & Slide Converter Scanner w/ 16GB SD Memory Card, Speed-Load Adapters for 35mm, 126, 110 Negative & Slides, Super 8 Films - Worldwide Voltage 110V/240V AC Adapter (Blue).
  • With our zonoz FS-THREE film scanner, you won't need anything else to get started. Using the film scanner is very easy with our intuitive design. Just load the film or slide onto the negatives or positives holder, and insert into place. Once the image appears, press "Scan". It is that easy. Your image has been scanned and saved to the FS-THREE's built-in memory. Items can also be saved to an SD card also (This Bundle Includes a 16GB SD Memory Card)..
  • The zonoz FS-THREE also has some very convenient features like scanning resolution and brightness. You can also flip/mirror images to eliminate some simple loading errors. This amazing and portable film scanner is all you need to convert your old films and slides into permanent memories..
  • 35mm negative film scanner with high resultion 22MP image output. Fast conversion, only takes seconds to scan an image. ​35mm slide converter scanner with high resultion 22MP image output. Fast conversion, only takes seconds to scan an image..
  • This ZONOZ FS-THREE bundle includes a 16GB SD Memory Card. - Simple Unique Stand-A....
Check Stock

Ampper Battery Terminals Set W/ M8 Nut, Compatible for Nissan Altima Murano Pathfinder Maxima Quest Rogue Titan Versa etc, 243407F000 and 243407F001 (1 Pair)

  • Compatible: for Nissan Altima Murano Pathfinder Maxima Quest Rogue Titan Versa Infiniti G35 FX35 QX70 I30 etc, positive & negative, 243407F000 & 243407F001..
  • With M8 nuts, made of copper, red and black plastic bottoms to help prevent corrosion..
  • Easy To Install, direct fit and no modifications, make it faster and easier for installation..
  • Used for battery extension, parallel connection, and ground connection..
  • Fit for 6-12 V car, vehicle, RV and boat, which have a top post battery (19 mm cone / tapering positive & 17 mm cone / tapering negative)..
Check Stock

YASHICA MF-1 Snapshot Art 35mm Film Camera Set (Turquoise)

  • CAMERA TYPE: YASHICA MF-1 Snapshot Art is a simple 35mm film camera with a shutter speed of 1/120s.
  • FOCUSING RANGE: It offers a focusing range from 1m to infinity.
  • LENS: YASHICA MF-1’s lens offers a focal length of 31mm with f/11 aperture.
  • BUILT-IN FLASH: Use the internal flash to get perfect snapshots even in low light.
  • INCLUDED FILM: Pair the MF-1 Snapshot Art with the included YASHICA 400 35mm negative film for street snaps.
Check Stock

Plustek OpticFilm 135i - Automatic Film & Slide Scanner, Batch converts 35mm Slides & Film Negatives, Support 3rd Party Editing Software Export, Max. 7200 dpi

  • OF 135i can automatic batch convert 35mm Slides and Negative film, perfect for people who have shoes box full of negatives and slides.
  • 7200 x 7200 dpi (69 Megapixels) for 35mm Negative film and mounted slides. 48-bit input, 24/48-bit output.
  • Built-in infrared channel can detect dust and scratches on the surface of the original negatives and slides. It is highly useful for defect removal without retouching the images..
  • Support export to 3rd party image editing software. For example: Adobe Photoshop or GIMP. User can setting in preference and about export after scan..
  • Support Windows 7/8/10/11 and Mac OS 10.12 ~ 11.x, user can download driver from Plustek website. Item with 2 year limited warranty..
Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

  • 【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity.
Check Stock

NUX NMP-2 Dual FootSwitch for Keyboard Modules and Effect pedals

  • This unit combines the functions of latch type and WTB-005 (momentary type) foot switches. Both of the unit’s foot switches may be set to function....
  • You can connect to gear equipped with TRS 1/4” (6.35mm) Phone jacks using a connection cable with stereo 1/4” (6.35mm) phone plugs at both ends..
  • It also could be used while close mode even passive status.
  • The NMP-2 uses 9V(Positive outside,Negative inside) 2.5mm plug to active Latch mode,open mode (also close mode with indicator)..
Check Stock

Battery Terminal Connectors, Quick Release Battery Terminal 2PCS for SAE/JIS Type A Posts, 4 Way Positive Negative Car Connector Automotive Battery Cable Wire Terminal Replacement Accessories

  • Car Battery Terminal Connector: This package includes positive and negative battery terminal connectors (2PCS in total) with 4 terminals for wiring, It is also equipped with an Allen wrench for easy disassembly and use..
  • Battery Connectors: Suitable for wires with a diameter of 5.2-7.4 mm (AWG size 1-4) or a cross-section of 16-35mm². Minimum wire diameter: 16 mm (5/8 inch). Maximum wire clamp: 9.5 mm/0.37 inch, mini wire clamp: 6.5 mm/0.25 inch..
  • Rugged and Durable: The battery terminals are made of tin-plated copper and stainless steel screws, which have good electrical conductivity and wears resistance, which can reduce voltage distortion and transmission loss..
  • Wide Range of Applications: Quick disconnect battery terminal suitable for SAE/JIS A type pillars for circular pillar automotive batteries. Positive and negative battery terminal connectors can be used in cars, vans, caravans, RVs, truck batteries, etc..
  • Easy to Identify: The quick release battery terminal has a red positive "+" and a black negative "-.
Check Stock

2PCS Battery Terminal Connectors 4way Positive Negative Battery Clamp car Terminals Connector Battery Terminal Quick Release Disconnect for SAE/JIS Type A Posts with Terminal Cleaning Brush(Silver)

  • 【Easy to Use】 With positive and negative labeled, easy to identify. 1 hex key provided for easy installation. Quick disconnect. After installing battery, connect to the battery posts by pressing down the lever, so no tool needed..
  • 【Convenient and Firm】 The Battery Terminal has 4 way terminals, designed for multiple connections. Wiring is easy to modify. Convenient wiring and firm connection..
  • 【Made of High Quality】 The Battery Terminal Connectors are made of tinned copper, which is corrosion resistant, with good electrical conductivity.
  • 【Dimension】 For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. Positive inner diameter: 17.5~19.1mm, Negative inner diameter: 15.9~17.5mm..
  • 【Wide Application】 Fits on round post auto batteries SAE/JIS Type A posts. The positive and negative battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Note：If you receive defective parts, don’t worry, please tell us immediately, we will give you the perfect solution！！.
Check Stock