Categories

Best Pro Power Heat Shrink Tubing

ELECFUN 2in Heat Shrink Tubing 3 1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube Fully Insulation 4 Feet Black Tubing and 4 Feet Red Tubing

  • Package: 4 ft long Black 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 4 ft long Red 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~....
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting....
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED....
Check Stock

Heat Shrink Tubing Kit,Mini Heat Gun + 328 PCS Heat Shrink Wrap Tube　2:1.

  • 328Pcs Heat Shrink Tube Shrinkage - It is 2:1 heat shrink ratio, and will shrink up to 1/2 of original, just use the mini heat gun heating for it 5 second..
  • High-quality heat gun: The hot air gun has two heat dissipation ports, and the service life can reach more than 5 years. 300W power is suitable for many DIY productions and can dissolve hot melt glue sticks and glue. Of course, it is definitely suitable for heat shrinkable tube..
  • Eight sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. First turn on this mini hot air gun switch,then glue inside will soften and seal the connection..
  • [Product parameters] Heat gun ：The length is 22 cm, which can produce high temperature of 200 degrees Celsius, and the US plug. Heat-shrink Tubing: 8 sizes, 5 colors, the sizes are 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm..
  • [Product warranty:] The heat gun can be used for five years. If it is broken under normal use, it will be replaced for free within five years. The heat shrinkable tube is RoHS compliant and free of formaldehyde. VETIN only produces safety products..
Check Stock

Pointool Heat Shrink Tubing Kit-Wire Shrink Wrap Tubing Wire Heat Shrink Tube Kit Insulation Electrical Colored Assorted Heat Shrink Tubing Assortment Electronics for Wires Shrink Ratio2 1,650Pcs

  • MULTIPLE SIZES AND COLORS-Contain any size you may need for anything from professional repair to DIY work at home, so the shrink tube is very convenient when working with different size wires. You may not use these wire shrink wraps a lot, but when you do, there's always a size that comes in handy. This heat shrink tubing kit affords wide variety of sizes and colors, especially the smaller size which hardest to find..
  • SHRINK QUICKLY, DURABLE and EVENLY-This shrink tube is well made of high quality material, thick and durable. Cover the area with them and shrinking them with a heat gun, then the wire shrink wraps will wrap the wire tight and evenly within 10 seconds. With this heat shrink tubing kit you will become more confident in your soldering work..
  • EASY TO USE-You can just shink the shrink tube with a lighter or hair dryer when you don't have a heat gun on hand. Of course, if you'd like to use the heat shrink tubing kit more professional, standard heat gun will be much better lol. The wire shrink wraps are all pre-cut into the most common sizes you'll need which makes your work a lot faster..
  • KEEP ORGANIZED-The heat shrink tubing comes in a nice compact case and the semi-modular container keeps each size separately. You can throw the heat shrink tu....
Check Stock

ELECFUN 3/8in Heat Shrink Tubing 3:1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube, Fully Insulation (4 Feet Black Tubing, and 4 Feet Red Tubing)

  • Package: 5pcs 0.8ft Black 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 5pcs 0.8ft Red 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

Mini Heat Gun, 350W/662°F Hot Air Gun with 6.56Ft Long Cable-HGP35AC

  • ...t tool due to the excellent scientific ergonomic design which can prevent repetitive strain injuries and other musculoskeletal disorders.
  • Non-slip rubber grip makes your hand comfortable and easier to hold the product tightly..
  • Easy and Long Endurance: Just put on plug and turn on switch, then starting to work. heat shrink gun can be used for 250 hours constantly because of its long endurance which is the guarantee of your successful project..
  • Wide Application and Product Service: With the reflector nozzle, you can use the small heat gun for shrink wrapping, epoxy resin, crafts, vinyl wrap, wire connectors, candle making, shrink tubing, embossing, phone repair, electronics, remove painting, shrink tubing, defrost, remove mud dirt and so on. PRODUCT SERVICE: if you have any questions about our product in 2 years, please contact us, we are happy to help..
Check Stock

AIRIC 3/8in Heat Shrink Tubing Roll, 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat-Shrink Tubing Industrial, Black, 50 Feet Roll

  • What You Get: Industrial black heat shrink tubing roll, Dia 3/8 inch (9.5mm), 50 feet length..
  • Adhesive Lined Black Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing clear is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief. Outer wall is flame retardant, but the glue is not flame retardant..
  • Wide Applications: Our clear waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

10pcs 6 Gauge 6 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

10pcs 2/0 Gauge 2/0 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

Wirefy 1-1/2\ Heat Shrink Tubing - Large Diameter - 4:1 Ratio - Adhesive Lined - Industrial Heat-Shrink Tubing - 50 Feet Roll - Black

  • 4:1 SHRINK RATIO - Recovers to 1/4 of its original diameter, and makes a tight seal. Highest heat shrink ratio on the market..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds..
  • DUAL WALL TUBING - Provides enhanced protection from wear and tear. Marine grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 1-1/2" (40.0mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects..
Check Stock

Wirefy 1/4\ Heat Shrink Tubing - 3:1 Ratio - Adhesive Lined - Industrial Marine Heat Shrink Tubing Roll - Black - 50 Feet Roll

  • 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds..
  • DUAL WALL TUBING - Provides enhanced protection from wear and tear. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 1/4 INCH (6.4mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects..
Check Stock

650pcs Heat Shrink Tubing Black innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2:1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection, Safe and Easy, Eco-Friendly Material

  • Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition does not contain heavy metal and other environmentally hazardous substances. No slowly or long-term virulence. No need to worry about your health when using innhom heat shrink wrap..
  • Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy and convenient to use with a heat gun..
  • Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and anti-aging. Shrink wrap wire tensile strength: 14 Mpa. Dielectric strength: 003e20kV/mm. Elongation at break: 003e400%. Volume resistivity: 003e1.0× 10^14Ω.cm. Cold-resistant bending -22℉(-30 °C) × 1h without cracking. Use innhom heat shrink tubes instead of ugly and short-lived electric tape..
  • Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink tubing assortment is mainly used in wire connection, rust prevention and cor....
Check Stock

Industrial Heat Shrink Tubing Kit,AIRIC 300pcs 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat Shrink Tubing Black, 7 Sizes(Diameter): 3/4, 1/2, 3/8, 1/4, 3/16, 1/8, 3/32 inch

  • 7 Sizes: Industrial heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". The length of heat shrink tube is precut to 45mm..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

Aonomi Compatible Industrial Heat Shrink Tube Labels Replacement for DYMO 18053 Fit with DYMO Rhino 4200 5200 5000 6000 Industrial Label Maker Black on White 3/8 x 4.9 ,10-Pack

  • Compatible with DYMO Rhino Pro 1000, 3000, 4200, 5000, 5200, 6000, ILP-219, 3M PL100, PL200, PL300 and Tyco T107M label makers..
  • Size of Each Tape: 3/8 inch (9mm) wide, 4.9 feet (1.5m) long. The size indication for this Heat-Shrink Tube is the width of the flattened tube as a....
  • Made of industrial grade polyolefin offers a 3:1 heat shrink ratio make sure to fit on wires or cables and make heat-shrink tube labels indispensable....
  • Heat shrink tube offers an excellent method of labeling wires and cables: Fantastic custom heat shrink solution, print legibly and shrink up perfectly....
  • All heat-shrink tube labels offer the convenience of printing directly on the tubing itself with any Industrial labeling tool for high-end cable....
Check Stock