Best Process Calibrator

OEM FLUKE 713-100G, Pressure Calibrator- 100 Psig. (1 Items)

Taylor Precision Products Pressure Calibrator with Carrying Case (0- to 160-Inch Water Pressure)

• Marked for 0- to 160-inches of water, this calibrator is capable of a wide range of pressure readings..
• The 1-3/4-inch dial is marked with clear white graphics on a black background for easy reading..
• A bright red-tipped pointer allows for at-a-glance measurements..
• The calibrator can be used as an alternative to a monometer for calibrating pressure instruments..
• This pressure calibrator comes with its own convenient carrying case for ease of storage and transport..

CEM BX-350 Portable Infrared Temperature Calibrators 122 to 662℉,50-350℃,Resolution 0.1℃/℉

• The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
• External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
• The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
• The calibrations can be done over a range of 50℃ to 350℃..
• Temperature display and stability resolution is 0.1 degree..

CEM BX-500 Portable IR Dry-Well Infrared Temperature Calibrators 122 to 932℉（50-500℃

• The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
• External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
• The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
• The calibrations can be done over a range of 50℃ to 500℃..
• Temperature display and stability resolution is 0.1 degree..

Negative Pressure Gauge Calibrator for HVAC, Laboratories, Room Pressure Monitoring Model: ACE PSI-PP1 (Static Pressure Pump Only)

• Calibrator: Static Pressure Pump Calibrator (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
• | Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
• Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
• Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
• Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Filter Monitoring, Room Pressure Monitoring, Laboratory..

Taylor Precision Products Classic Series Large Dial Thermometer (Oven) - Set of 2

• Preferred by the process, offshore, power, pharmaceutical and chemical industries.
• Durable and reliable, with an all welded 303/304 stainless steel housing. Corrosion resistant to most chemicals. Hermetic seal, dustproof and leakproof IP65 & NEMA 4x.
• Adjustable all angle for maximum utility with installation, head can be rotated 360 degrees and stem can be position over 180 degrees. Heavy duty design.
• Accuracy +/-1% full span per ASME B40.3 Grade A. The calibration reset is located on the side of the case benefiting the calibrator, and requiring an Allen wrench to discourage inadvertent tampering.
• Manufactured in USA, with an 8 year warranty.

TSI Quest (Formerly 3M) eg4-D-AC3 Personal Noise Dosimeter, Dock, and Calibrator

• Kit Includes: EDGE 4 Dosimeter with 1/4-Inch Microphone Two Windscreens, AC-300 Calibrator, Single Docking Station, Calibrator Adapter, USB Cable, Power Supply and Storage Case.
• Displays SPL, dose, Lavg, Leq, TWA, maximum level, minimum level, peak level, exposure, and run time… all while in Run mode.
• Independent selectable thresholds from 70 to 90dB or none, independent exchange rates for each dosimeter (3, 4, or 5 dB), and independent criterion levels from 70 to 90 dB in 1dB increments.
• Rechargeable lithium polymer battery provides more than 60 hours of run time, and only needs to be replaced every three years.

Ace Instruments Static Pump, DP Pressure Gauge Calibrator for HVAC, Laboratories, Calibration Labs Model: ACE PSI-PP1 (Static Pressure Pump with Master Gauge)

• Calibrator: Static Pressure Pump (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
• Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
• Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
• Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
• Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Laboratories, Calibration Labs..

Portable Electronic Tension Calibrator ABS LCD Digital Display Shakeproof Tennis Badminton String Tool Black

• High Performance: Electronic tension calibrator with high performance embedded microcomputer as the core, accurate weighing, stable performance, vibration resistance, high practicability..
• Manufacturing Material: The case of hand held tension calibrator is made of ABS engineering plastic, which is strong and durable, which can effectively prolong its service life..
• Exquisite Appearance and Portable: Appearance is exquisite and convenient to carry. LCD digital display design, which can know relevant data in a timely and effective manner..
• Circuit Damage Prevention: If the sign of low power is displayed, please replace the battery in time. If the electronic weighing device is not used for a long time, take out the battery to avoid damage to the circuit due to battery leakage..
• Unit Conversion: Press the "UNIT" key, and the weighing instrument will perform cycle conversion among the four units of KG, lb, catty, and oz..

Digital Sound Level Meter Calibrator 94dB & 114dB for 1/2\ and 1\ inch Microphone, Professional Noise Decibel Calibration Tool Measurement Accuracy Check

• SIMPLE OPERATION : With only 3 buttons: 94dB, 114dB and Power On/Off Button. Simply power on the calibrator, select 94dB or 114dB level, and it's ready to go!.
• CLEAR DIGITAL DISPLAY: Digital display shows the chosen dB level clearly with Backlight. Avoid making careless mistakes comparing with traditional power switching buttons..
• PORTABLE: Lightweight and small size. Handy sound source for quick and easy calibration of sound level meters and sound measuring systems..
• SUITABLE FOR 1/2" and 1" MICROPHONE SIZE 1/2" transducer cap (adaptor) is inserted on the calibrator, simply remove the cap to calibrate sound level meters with 1" Microphone.
• PROFESSIONAL: Conforms to IEC60942 (IEC942) class 1 standard. Solid design provides accurate and reliable performance, suitable for personal, field and laboratory use..

CEM BX-150 Dry-Well Temperature Calibrator 33°C to 300°C

• The calibrator can operate at very high temperature . Precautions must be taken to prevent personal injury or damage to surrounding objects . probes may be hot when removed from the units and should be placed on a heat resistant surface . The unit may remain hot for several minutes after switching off .Do not switch off if temperatures above +100℃. Allow to cool before storage ..
• Caution must be taken when removing probes and inserts from the units . if the unit is set at a high temperature the inserts will be very hot and could cause burns probes and inserts only on a suitable heatproof surface ..
• Only place temperature probes in dry-block holes . These units are designed to be operated dry . Do not sprinkle and liquid into any of the dry-block holes ..
• These dry-blocks are designed to be rugged and durable but do contain electronics. Do not operate in dirty , dusty or very damp enviroment or near liquids that could present a hazard from electric shock..
• The units are ideal for use in a variety of industrial and process applications .Each unit is supplied with a traceable certification of calibration of calibration showing actual test data , which can be used as part of quality assurance programmes ..

Tel-Tru 41100257 Model Aa375R Resettable Bi-Metal Process Grade Thermometer, Stainless Steel, 3\ Dial, 1/2\ Npt Adjustable Angle Back Connection, 0.250\ Diameter x 2.5\ Long 304Ss Stem, 0/300 Degrees Fahrenheit, +/- 1% Full Span Accuracy

• Preferred by the process, offshore, power, pharmaceutical and chemical industries.
• Durable and reliable, with an all welded 303/304 stainless steel housing. Corrosion resistant to most chemicals. Hermetic seal, dustproof and leakproof IP65 & NEMA 4x.
• Adjustable all angle for maximum utility with installation, head can be rotated 360 degrees and stem can be position over 180 degrees. Heavy duty design.
• Accuracy +/-1% full span per ASME B40.3 Grade A. The calibration reset is located on the side of the case benefiting the calibrator, and requiring an Allen wrench to discourage inadvertent tampering.
• Manufactured in USA, with an 8 year warranty.

Tel-Tru 42100214 Model Aa575R Resettable Bi-Metal Process Grade Thermometer, Stainless Steel, 5\ Dial, 1/2\ Npt Adjustable Angle Back Connection, 0.250\ Diameter x 2.5\ Long 304Ss Stem, 0/250 Degree Fahrenheitahrenheit and -20/120 Deg Celsius, +/-...

• Preferred by the process, offshore, power, pharmaceutical and chemical industries.
• Durable and reliable, with an all welded 303/304 stainless steel housing. Corrosion resistant to most chemicals. Hermetic seal, dustproof and leakproof IP65 & NEMA 4x.
• Adjustable all angle for maximum utility with installation, head can be rotated 360 degrees and stem can be position over 180 degrees. Heavy duty design.
• Accuracy +/-1% full span per ASME B40.3 Grade A. The calibration reset is located on the side of the case benefiting the calibrator, and requiring an Allen wrench to discourage inadvertent tampering.
• Manufactured in USA, with an 8 year warranty.