Categories

Best Professional Ptfe Tapes

Libraton PVC Cutter 1-5/8\，PVC Pipe Cutter, Pex Cutter 1-1/4\

  • One set for all: The plastic pipe cutter set includes PVC pipe cutter *1 PEX pipe cutter *1 replacement blade for PVC cutter *1 mini tube cutter *1 PTFE sealing tapes *3.
  • Different cutting range: PVC cutter (1-5/8.
Check Stock

APT, UHMW (Ultra-high Molecular Weight) Polyethylene Tape, Resists Abrasion, Impact, for Surface Protection and Friction and Noise Reduction for Lining Sliding Surfaces. (1' x 5Yds, 5 Mil UHMW)

  • 【Longer Durability】- The UHMW plastic adhesive tapes has longer wear life than Nylon and PTFE..
  • 【Squeak Reduction】- UHMW low friction tape helps minimize squeaking and rattling caused from vibration or wear..
  • 【Resistant to Abrasion】- Translucent, abrasion resistant backing helps protect surfaces from wear..
  • 【Excellent Adhesion】- Acrylic adhesive tapes has excellent adhesion to metal, wood & other surfaces..
  • 【Trusted Every Where】- Our uhmw adhesive tape are tested for high performance every time. Do not have any harmful chemicals..
Check Stock

APT, UHMW (Ultra-high Molecular Weight) Polyethylene Tape, Resists Abrasion, Impact, for Surface Protection and Friction and Noise Reduction for Lining Sliding Surfaces. (0.75' x 5Yds, 5 Mil UHMW)

  • 【Longer Durability】- The UHMW plastic adhesive tapes has longer wear life than Nylon and PTFE..
  • 【Squeak Reduction】- UHMW low friction tape helps minimize squeaking and rattling caused from vibration or wear..
  • 【Resistant to Abrasion】- Translucent, abrasion resistant backing helps protect surfaces from wear..
  • 【Excellent Adhesion】- Acrylic adhesive tapes has excellent adhesion to metal, wood & other surfaces..
  • 【Trusted Every Where】- Our uhmw adhesive tape are tested for high performance every time. Do not have any harmful chemicals..
Check Stock

SCHMETZ 5 Super NONSTICK Needles 80/12

  • A Super Universal Needle with a non-stick coating of NIT (Nickel-Phosphor-PTFE)..
  • Extra-large eye is suitable for embroidery work. The eye corresponds to a needle two sizes larger (i.e., the 70/10 Non Stick eye is similar to a size....
  • Distinctive scarf with the special design of the eye ensures prevention of skipped stitches. Slightly rounded point provides trouble-free sewing on....
  • Strong conical blade reinforcement easily handles thick fabrics like denim. Fabric Use: Machine embroidery, hook and loop tapes, general sewing..
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • ... braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
  • 5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • ...before purchase! (Includes: as shown in the picture.).
  • High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 degree PTFE Fitting x 2, AN-6 180 degree PTFE Fitting x 2..
Check Stock

High Temp Tape, FORTSPANG PTFE Coated Fiberglass Teflon Tape, High Temperature Adhesive Tape, Drying Conveyor Belt; Welding Sealing Tape Heat Resistant Up to 300℃ (50mmx10m)

  • 【Material】Teflon tape / PTFE roll with self-adhesive back. Width: 50 mm.
  • 【High quality】Our Teflon tape is pressure-resistant, corrosion-resistant, abrasion-resistant, high-temperature resistant, smooth surface, low-friction. High temperature resistance from -196 ° C to 300° C..
  • 【Widely used】Ideal for a variety of home and commercial projects such as high speed sealing machine, food packaging, hot melt machine, 3D printing, high temperature powder coating, etching etc..
  • 【Easy to use】Simply pull the tape off the roll and place it in the right place. Self-adhesive Teflon tape is easy to apply and remove without leaving any residue..
  • 【Make sure the equipment runs smoothly】Pressure-sensitive silicone adhesive tapes offer excellent drainage properties and non-stick coated surfaces, replace deteriorated or burned-out Teflon tape / PTFE tape so that machines and equipment can run smoothly and efficiently..
Check Stock

Rectorseal 23710 1-3/4-Ounce Tube T Plus  Pipe Thread Sealant , White

  • HIGH QUALITY:Thread seal tapes are made of PTFE which has a good sealing capability and can resistant corrosion. Plumbing pipe tape also has a good performance towards moisture and acids, they will not crack easily..
  • PACKAGE CONTENT:Each package include 30 rolls of thread seal tapes, size :1/2" in width, 393" long(10m ) each roll, 984ft in total. Enough for you to use a long time. You needn't have to buy again and again..
  • GOOD PACKAGE:Each roll of teflon tape has a plastic cover which can protect the tape from dust, when you finished your work, just place them back to the plastic cover, it is a better way to collect them compared to normal thread tape without plastic cover..
  • EASY TO USE:When you want to use them, just take out the tape from the plastic package, and wrap it around the tape or air head or some other thing that need this sealant tape, and then screw it in. As it is not sticky, so it is also easy fro you to remove them..
  • WIDE APPLICATION:Plumbers thread tape can be widely used not only in our home but also in industrial and commercial. They are suitable for leak water, plumbers, air head, air fitting, air compressor, thread pipe and other kind of things..
Check Stock

PTFE Coated Fiberglass Telfon Tape,high Temperature Tape,Drying Mechanical Conveyor Belt, Welding Sealing Tape,Teflon Tape for Vacuum Sealer Machine(Brown, 50mm x 11yards(33feet) x 0.18mm)

  • PTFE coated fiberglass fabric with pressure sensitive silicone adhesive tapes provide superior release properties and non-stick surfaces to allow machinery and equipment to run smoothly and efficiently..
  • This fiberglass tape provide the solution of hgh temperature,it is used in packaging (heat sealing, shrink wrapping) as a heat resistant release surface placed over heating elements and pressure bars.
  • This tape maintains durability at high speeds and high temperatures. Frequently used in heat sealers, blister formation and form-fill-seal equipment as well as lining of guide rails, chutes and slides.
  • This tape maintains high temperature resistance to 500F, The PTFE coating provides a smooth, anti-stick surface,waterproof.
  • Multipurpose: Impulse Sealer, high-speed sealing machine, food packaging, hot melt machine, motor, high and low voltage electrical products, wire and cable insulation protection, battery manufacturing sewing machine and so. It is high temperature resistance, ,wear-resistant, corrosion-resistant, anti-sticking.
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • ...to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
  • We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..
Check Stock

EVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT

  • PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
  • Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
  • PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

EVIL ENERGY 8AN PTFE Fuel Line Kit,AN8 E85 Nylon Braided Fuel Hose 16FT(0.394Inch ID)

  • ID: 13/32". OD: 0.543inch.Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications..
  • Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants..
  • -8 ptfe nylon braided fuel line relatively hard,it can't be bend and folding in half. Professional installation is highly recommended..
  • EVIL ENERGY provide 8an PTFE fuel hose fitting kit 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Polaris Fuel Rail Damper Assembly, Genuine OEM Part 2521101, Qty 1

  • ID: 5/16". OD: 0.465inch.Length: 10 feet. Please measure before purchase! (Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000psi. Bursting pressure: 10000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock