Best Profile Cylinder

CISA European Profile Mortise Double Cylinder Lock 60 mm or 2-3/8 Double Cylinder

  • Shifted Cylinder cam design prevents extraction by impacts.
  • Spools provide protection against lockpics.
  • Standard European profile double cylinder.
  • To be installed in european mortise locks.
Check Stock

Makita MAC5200 3.0 HP* Big Bore™ Air Compressor

  • Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance.
  • Powerful 3.0 HP motor produces 6.5 CFM at 90 PSI for increased productivity.
  • Pump is oil-lubricated for cooler running temperatures and reduced wear.
  • Durable cast iron cylinder reduces wear and increases pump life.
  • Folding handle with low profile design for easy storage with handle folded.
Check Stock

The ROP Shop | VRO Conversion Fuel Pump for Johnson, Evinrude, OMC, BRP 5004558, 0438400 Engine

  • The ROP Shop replacement VRO Conversion Fuel Pump for Johnson, Evinrude, OMC, BRP 5004558, 0438400 Engine.
  • Specs - Refer to images 2 & 3 for more information.
  • Includes - (1) Vertical Ratio Oil Injection Conversion Fuel Pump.
  • Fits: V4 & V6 Crossflow and Looper outboard engines with 90° angle cylinder block. Does not fit 60° or 3 cylinder applications. Crossflow engines have shaped piston tops, Looper engines have flat top pistons. The 90° motor will have a more triangular profile, while the 60° motor is more rounded.
  • This is a Pre-Mix VRO Conversion Fuel Pump Kit. It replaces the original VRO fuel pump and now mixes the fuel and oil in the fuel tank instead.
Check Stock

Baldwin Pistoria Single Cylinder Front Door Handleset Featuring SmartKey Security in Venetian Bronze, Prestige Series with Traditional Door Hardware and Madrina Lever

  • Baldwin Prestige offers a sectional handleset for your SmartKey front door in a venetian bronze finish with a traditional door handle design..
  • Elegant low profile cylinder with an architecturally inspired design.
  • This classic front door lock is a single cylinder entry set shown in a venetian bronze.
  • re-key the lock yourself in seconds in 3 easy steps with a SmartKey door handle.
  • This exterior door lock fits standard door preparations: 1-3/8″ to 1-3/4″ thick.
Check Stock

The ROP Shop | VRO Conversion Fuel Pump for 1991 Evinrude, Johnson 120 HP J120TXEIE, J120TLAIE

  • The ROP Shop replacement VRO Conversion Fuel Pump for 1991 Evinrude, Johnson 120 HP J120TXEIE, J120TLAIE.
  • Specs - Refer to images 2 & 3 for more information.
  • Includes - (1) Vertical Ratio Oil Injection Conversion Fuel Pump.
  • Fits: V4 & V6 Crossflow and Looper outboard engines with 90° angle cylinder block. Does not fit 60° or 3 cylinder applications. Crossflow engines have shaped piston tops, Looper engines have flat top pistons. The 90° motor will have a more triangular profile, while the 60° motor is more rounded.
  • This is a Pre-Mix VRO Conversion Fuel Pump Kit. It replaces the original VRO fuel pump and now mixes the fuel and oil in the fuel tank instead.
Check Stock

NEWTRY 20T Low Profile Hydraulic Jack Porta Power Kit + CP-180 Manual Hydraulic Hand Pump Multi Section Jack, 1.18” Stroke Industrial Mini Hydraulic Cylinder

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2.24inches high, but the stroke is up to 1.18 inches. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has m....
Check Stock

First Strike 13/3000 Paintball Tank HPA

  • Light-weight Aluminum Bottle (flat bottom cylinder).
  • Adjustable output (275psi – 1100psi kits sold separately).
  • Low-profile fill nipples and burst disks.
Check Stock

First Strike Bars (Full Size Chocolate) 6 Pack

  • Light-weight Aluminum Bottle (flat bottom cylinder).
  • Adjustable output (275psi – 1100psi kits sold separately).
  • Low-profile fill nipples and burst disks.
Check Stock

Baldwin SCCSD190 Contemporary Single Cylinder Deadbolt, Satin Black

  • Package dimensions: 8.0" L x 5.0" W x 5.0" H.
Check Stock

Schlage BE375 CEN 619 Touch Century Deadbolt, Electronic Keyless Entry Lock, Satin Nickel

Check Stock

Bottle Jack Ram 10 Ton Capacity Porta Power Hydraulic Pump Auto Body Frame Repair Tool Kit Power Set Auto Tool for Automotive Truck Farm and Heavy Equipment/Construction Skroutz

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2 inches high, but the stroke is up to 1 inch. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are ....
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • ...orced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo-Ram | Product Type: Manifold.
Check Stock

NEWTRY Hydraulic Ram Cylinder 20 ton Hydraulic Jack Lifting Cylinder Hydraulic Porta Power Cylinder Ram 0.51” Low Profile Hydraulic Ram Jack Mini, Portable for Shipbuilding, Bridge, Construction

  • ...jack is only 2.3inches, which can lift 20T heavy objects. It has the advantages of smaller size and greater working capacity, especially in a small space location, and has the functions of portability, flexibility, and large lifting force..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are suitable for CP-180 pump and 30T is suitable for CP-700 pump..
  • ▷[WIDE RANGE OF APPLICATIONS]---This Low Profile Hydraulic Ram Jack is often used in power, chemical, steel, bridges, machinery and other industries. Suitable for vertical, horizontal and inverted directions, but cannot be tilted use. In order to operate correctly, all cylinders need to be connected to a solid flat lifting surface rather than soft or rough surface..
Check Stock