Categories

Best Projection Mapping Software Open Source

Sky High Bull's-Eye (24"x24") Drone Ground Control Point GCP - UAV Aerial Target for Mapping & Surveying (6 Pack) | Center Passthrough (Black/White Markers) | Pix4D & DroneDeploy Compatible

  • ...ghtweight, a big benefit when traveling or placing the GCPs in the field. The material is made with a matte finish which reduces glare from sunlight and overexposure on sunny days, which makes selecting the center of the target easier during post-processing..
  • GCP WITH SOFTWARE COMPATIBILITY - These GCPs are compatible with many popular photogrammetry reconstruction software from the leading companies in the space drone mapping, photogrammetry, and surveying space,. The GCPs are compatible with most auto-detection software, and these GCPs have been used in a wide range of industries and educational training programs with great success..
  • UAV GCP WITH CORNER ANCHOR POINTS - With eyelets at each corner to easily anchor the aerial targets, the corner anchor points prevent the GCPs from moving during mapping. The anchors also allow the GCPs to be left in the field if needed for repeat flights over a period of time, providing peace of mind that the GCPs offer repeatable location data for high-accuracy mapping and photogrammetry..
Check Stock

Libre Computer Board AML-S905X-CC Le Potato 64-bit 4K Media SBC and Pi 3 B+ Alternative (2GB 2-Pack)

  • LATEST 2022 SOFTWARE SUPPORT: Ubuntu 22.04 LTS and Raspbian 11 64/32-bit with support for hardware-accelerated video playback and 3D graphics. Upstream software stack featuring the latest Linux 5.19 with open source graphics and video libraries. Most PC-like single board computer on the market with images based on UEFI booting and GRUB. For Raspbian, please run libretech-raspbian-portability from our Github on your Raspberry Pi first. Guide available on YouTube..
  • COMPATIBILITY AND EXTENSIBILITY: Form factor compatible with the Pi 3 for re-use with existing cases and power supplies. 40-pin header enables hardware re-use by maintaining compatible GPIO pin functions like SPI, I2C, PWM, and UART. Our powerful GPIO wiring tool, libretech-wiring-tool, is available on Github that can quickly translate from header or BCM GPIO numbers to sysfs and gpiod numbering. Dynamic dtoverlay support for faster design, testing, and learning..
  • HIGH PERFORMANCE LOW POWER: AML-S905X-CC performs faster than a Pi 3 B+ while using half the power. It is designed with power optimizations to increase sustained performance under load and reduce failures due to input voltage and current. It is one of the first SBCs to support 4K multi-codec hardware decoding and features a highly pe....
Check Stock

Garmin Striker Plus 5Cv GPS Fish Finder with GT20 Transom Mount Transducer 010-01872-01 Renewed

  • 5” GPS fishfinder with industry-leading Sonar and Quickdraw contours Mapping software includes transducer for built-in Garmin CHIRP traditional....
  • Built-in Garmin Quickdraw contours Mapping software lets you create and store maps with 1-foot contours for up to 2 million acres.
  • Built-in GPS lets you mark waypoints, create routes and view boat’s speed.
  • Bright, sunlight-readable 5” display and intuitive user interface.
  • Rugged design for every fishing environment, IPX7 water rating.
Check Stock

Garmin Striker Plus 9SV with CV52HW-TM transducer, 010-01875-00

  • Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars.
  • Striker series does not accept any mapping software and does not come loaded with any mapping. The Striker series is a fishfinder, not a multi-function chartplotter and fishfinder combination..
  • Built-in Wi-Fi for access to ActiveCaptain app so you can receive smart notifications, access Quickdraw Contours Community and transfer waypoints and software update notifications.
  • Built-in GPS lets you mark waypoints, create routes and view boat’s speed.
  • Bright, sunlight-readable 9” display and intuitive user interface.
Check Stock

Trezor Model One - Crypto Hardware Wallet - The Most Trusted Cold Storage for Bitcoin, Ethereum, ERC20 and Many More (Black)

  • Offline security: Create and store keys offline, so you can sign your transactions safely isolated from hacks, malware and other attacks..
  • Protect your privacy: Fully open-source hardware and software makes it easier to protect your identity and keep your finances private..
  • Other features: Option to install Bitcoin-only firmware or use your Trezor as a two-factor authenticator..
Check Stock

AWS DeepRacer – Fully autonomous 1/18th scale race car for developers | With open source projects

  • AWS DeepRacer is the fastest way for developers to get rolling with machine learning, literally. Get hands-on with a fully autonomous 1/18th scale race car driven by reinforcement learning, 3D racing simulator, and a global racing league..
  • Car - AWS DeepRacer is an autonomous 1/18th scale race car designed to test reinforcement learning (RL) models by racing on a physical track..
  • Build RL Models: You can build your own RL model for AWS DeepRacer. Building a model requires basic Python programming skills..
  • Open Source Device Software: Get started with one of six included sample projects or create your own robotics applications with DeepRacer hardware and open source device software..
Check Stock

LibreOffice v4.3 for PC [Open Source Download]

  • Your documents will look professional and clean, regardless of their purpose: a letter, a master thesis, a brochure, financial reports, marketing....
  • LibreOffice is compatible with many document formats such as Microsoft Word, Excel, PowerPoint and Publisher. But LibreOffice goes further by enabling....
  • Beyond the many features shipped by default, LibreOffice is easily extensible through its powerful extensions mechanisms. Get even more features and....
  • LibreOffice is Free and Open Source Software. Its development is open to new talent and new ideas. Our software is tested and used daily by a large....
Check Stock

Maslow CNC Router Kit - Basic Bundle - Engraving Wood Milling Machine - 4x8 foot high performance DIY with Z-Axis

  • GREAT VALUE: This 4 x 8 foot DIY CNC kit is a perfect introduction to large format CNCs. Includes some advanced features, such as Z-Axis functionality....
  • OPEN-SOURCE SOFTWARE: The Maslow is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a....
  • CHAIN DRIVEN: Our chain drive system has multiple benefits - it's a stronger alternative compared to belt system machines, and can easily be scaled up....
  • HIGH PERFORMANCE: This professional-quality machine tool can cut anything a traditional hand router can - including hardwoods.
  • 100% SATISFACTION GUARANTEE: At MakerMade, we maintain our commitment to our customer. Therefore, we pride ourselves on our service. If you ever have....
Check Stock

ROS Robotic Kit Robot Arm for Raspberry Pi 4B Transbot Yahboom Maker (Pi Ver.V)（Raspberry Pi 4B NOT Include）

  • Transbot is a high-level programmable project robot based on Raspberry Pi 4B for adults and graduates. We recommend using Pi 4B 8GB. The powerful mapping function requires enough internal running memory. The use of Raspberry Pi 4B 4GB is usually It can only realize the function of building a single. Please note that the raspberry Pi 4B is not included and needs to be ordered separately.
  • ROS, an open source operating system for robots, is the main robot development framework, providing complete solutions from drivers to algorithms to development tools, making robot development easy. For example: communication mechanisms, development tools and ecosystems can all be implemented through ROS. Transbot is a programmable and intelligently developed robot based on this system..
  • Realizing lidar mapping navigation, three-dimensional mapping navigation and path planning automatic navigation is the biggest feature of Transbot Robot Arm Car. In addition, all basic AI intelligent recognition functions are available, as well as traditional line patrol and Obstacle avoidance, etc. Integrate the functions of G1 Tank, jetbot and dofbot. Deep Learning Programming Robot Field.
  • Yahboom provides professional material courses, including video explanations, which combine theor....
Check Stock

ROS Robotic Kit Robot Arm for Raspberry Pi 4B Transbot Yahboom Maker (Pi Ver.II) （Raspberry Pi 4B NOT Include

  • Transbot is a high-level programmable project robot based on Raspberry Pi 4B for adults and graduates. We recommend using Pi 4B 8GB. The powerful mapping function requires enough internal running memory. The use of Raspberry Pi 4B 4GB is usually It can only realize the function of building a single. Please note that the raspberry Pi 4B is not included and needs to be ordered separately.
  • ROS, an open source operating system for robots, is the main robot development framework, providing complete solutions from drivers to algorithms to development tools, making robot development easy. For example: communication mechanisms, development tools and ecosystems can all be implemented through ROS. Transbot is a programmable and intelligently developed robot based on this system..
  • Realizing lidar mapping navigation, three-dimensional mapping navigation and path planning automatic navigation is the biggest feature of Transbot Robot Arm Car. In addition, all basic AI intelligent recognition functions are available, as well as traditional line patrol and Obstacle avoidance, etc. Integrate the functions of G1 Tank, jetbot and dofbot. Deep Learning Programming Robot Field.
  • Yahboom provides professional material courses, including video explanations, which combine theor....
Check Stock

ROS Robotic Kit Robot Arm for Raspberry Pi 4B Transbot Yahboom Maker (Pi Ver.IV) （Raspberry Pi 4B NOT Include）

  • Transbot is a high-level programmable project robot based on Raspberry Pi 4B for adults and graduates. We recommend using Pi 4B 8GB. The powerful mapping function requires enough internal running memory. The use of Raspberry Pi 4B 4GB is usually It can only realize the function of building a single. Please note that the raspberry Pi 4B is not included and needs to be ordered separately.
  • ROS, an open source operating system for robots, is the main robot development framework, providing complete solutions from drivers to algorithms to development tools, making robot development easy. For example: communication mechanisms, development tools and ecosystems can all be implemented through ROS. Transbot is a programmable and intelligently developed robot based on this system..
  • Realizing lidar mapping navigation, three-dimensional mapping navigation and path planning automatic navigation is the biggest feature of Transbot Robot Arm Car. In addition, all basic AI intelligent recognition functions are available, as well as traditional line patrol and Obstacle avoidance, etc. Integrate the functions of G1 Tank, jetbot and dofbot. Deep Learning Programming Robot Field.
  • Yahboom provides professional material courses, including video explanations, which combine theor....
Check Stock

Transparency Film Transparency Paper for Inkjet Printers 8.5 x 11 Inches 100% Clear 120 Sheets

  • Materials: high-quality PET tablets are adopted for processing, with higher transparency and 100% clear.
  • Application scope: applicable to aerospace mapping, printing plate, slide projection, projection and electronic fixture printing film and PCB and....
  • Features: special coating on the surface of the film, which can produce excellent details and brighter colors.
  • It can also dry faster good performance....
  • Instructions: print on a non-smooth surface of the film. if you print on a smooth, uncoated surface, the ink will not dry.
Check Stock

Stay Home [Explicit]

  • ...h laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates from the Maker Made team..
  • PRECISION: Maker Made M2 has a highly accurate cutting with a variance of just 1mm. Every piece is purpose-built for accurate, consistent cutting performance. The M2 cuts up to 40% faster than Maslow CNC, its motor is cooler and more efficient, the router bit is smaller for better accuracy..
  • TRIED AND TESTED PARTS MADE TO LAST: Designed and developed in the USA, nearly every major component of the M2 is custom built for this purpose. We are fully committed to the customer and the maker community above all else. If it doesn’t work for you, it ....
Check Stock