Categories

Best Propeller Shaft Clutch Operation

Outboard Motor, 2 Stroke 3.5HP Heavy Duty Outboard Motor Boat Engine Water Cooling CDI System (US Stockt)

  • ✔2-strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode..
  • ✔Overall length:92CM,Overall widteh:36.5cm,Overall height:22cm,Transom height:42cm. Propeller mark:7-1/45-A(inch).
  • ✔Type:2-stroke 3.5HP. Maximum output:2.5kw. Speed:10km/h. Short Shaft:40cm.
  • ✔Full throttle perating range:4000-5000r/min. Ignition system: CDI system. Starting system: Manual start. Staring carburetion system: Choke start..
  • ✔Recommended fuel: Regular unleaded gasoline.The engine and the propeller ratio:2:1. Fuel to oil ratio: 35:1. Gear ratio: 27/13. Built-in fuel tank: 1.3L. Fuel consumption per hour: 1.5L.
Check Stock

DJI Mavic 2 Low-Noise Propellers for Mavic 2 Zoom, Mavic 2 Pro Drone Quadcopter Accessory Replacement - Part 13 (Bundle: 2 Pairs)

  • AB forward and reverse propellers，is suitable for motors with shaft diameter of 0.8MM, such as 614,615,716, etc. Please note that 716 has two kinds of motors, one with shaft diameter of 0.8mm and the other with shaft diameter of 1.0 mm. Our mini propeller is only suitable for motors with shaft diameter of 0.8MM, and the propeller blades are 46 mm long..
  • Mini propeller, durable and light，Made of nylon material,Well-made and well-balanced, strong toughness and not easy to break..
  • Quick installation and disassembly without using other tools. When installing, you need to cross the same two together. If the A side is installed on the B side, it can't fly. It needs to be readjusted and the size needs to be the same as your own product before it can be used..
  • This is a propeller with a length of 46 mm/1.8 inch, and its central shaft hole is 0.8 mm/0.03 inch. It needs to be accurately matched to the size of the central hole of your product and the length of the propeller blade before it can be used correctly. Please carefully match the specifications you need..
Check Stock

LucaSng Engine 212CC Centrifugal Clutch 3/4" Bore 12 Tooth+35 Chain Up to 6.5 HP Go Kart For Go Karts Mini Bike Replace Parts

  • 3/4" Shaft and 3/16" Key way Shaft Bore,:#35 Chain Accommodates,12 Tooth.
  • 2 - 6.5HP engines for Honda GC160, GC190, GX120, GX140, GX160, GX200.
  • Fits Engine 2 - 6.5HP with 3/4" Shaft and 3/16" Key way..
  • A high quality and professional clutch,Centrifugal clutch 3/4" bore 12 tooth design..
  • High impact,wear resistant that is super durable,Commonly used on go karts, mini bikes,Replace the old broken clutch,User-friendly controls for easy starting and operation.
Check Stock

6 Set DC Motors Kit, Mini Electric Hobby Motor 3V -12V 25000 RPM Strong Magnetic with Shaft Propeller, 2 x AA Battery Holder,9V Battery Clip Connector,Plastic Wheels for DIY Science Projects

  • Pay attention: Please read the instructions or pictures carefully, use the correct circuit diagram to avoid short circuit, short circuit will produce high temperature and Causing accessory damage.
  • colour:Red & Blue & Yellow&Green&Clear(Random Color).
  • High torque Strong magnetic Brushed Electric 130 MOTOR, can be used for Science Educational models, DIY STEM toys, etc.. It is recommended to use a 3V battery drive to avoid high-speed operation affecting the motor life..
  • Package including:6pcs DC motor,6pcs 9V Battery Clip Connector,6pcs 2 x AA Battery Holder,6pcs motor mounting bracket,6pcs boat rocker switches,12pcs x electronic wire(25cm),8pcs Plastic wheels，4pcs 2*100mm shaft,4pcs 4 vanes propeller,2pcs 3 vanes propeller and 40cmΦ3 Heat shrink tube.
Check Stock

Bettomshin Drive Shaft w Propeller and Universal Joint for RC Boat, L200mm Shaft, L150mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

  • 【Parameters】- Shaft length: 20cm/7.8".
  • Suit for motor shaft diameter: 3.17mm/0.12".
  • 【High Quality】- RC boat propeller shaft kit is made of stainless steel,corrosion-resistant,wear-resistant and good sealing..
  • 【Feature】- There is bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in whirl..
  • 【Application】- The propeller shaft is suitable for the different types of boats ,simulation compatible with DIY RC model, such as RC boat toy ,RC submarine and so on..
Check Stock

Heyiarbeit Drive Shaft Fit for 2mm Motor Shaft w Propeller and Universal Joint for RC Boat, L100mm Shaft, L50mm Sleeve, D36mm Propeller

  • 【Parameters】- Shaft length: 10cm/3.94".
  • Suit for motor shaft diameter: 2mm/0.08".
  • 【High Material】- Remote control boat propeller shaft kit is made of stainless steel, which has good corrosion resistance and wear resistance, and has good sealing performance.
  • 【Advantages】This RC boat drive shaft assemble kit is composed of high quality materials, with speed anti-impact plastic propeller which with light weight and small size designing, is a Good choice for the repairing and replacing of your rc boat..
  • 【Application】- The propeller shaft is suitable for the different types of boats ,simulation compatible with DIY RC model, such as RC boat,RC submarine and so on.
  • 【Note】- This ship assembly is equipped with a bearing between the shaft and the shaft sleeve, which can maintain high strength and high speed when rotating.
Check Stock

VASHLY Go Kart Clutch 3/4" Bore 10T with #40 41 420 Chain for Go Kart Minibike and Fun Kart Engine

  • ...e, sturdy, and durable, has maximum torque, is wear-resisting, and has fast heat dissipation..
  • 【Easy to Install】 Easy to install, Metric Property Bolt and Washer Kit are Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft. Bi-directional Operation, Clutch Can be Mount Inward or Outward on Crankshaft..
  • 【Before Purchasing】Package Includes 1 x 3/4 10 Teeth Clutch, 1 x #40/41/420 Chain, 2 x Clutch Bolts 、2 x Washer Kits, and 2 x Screw wrenches, Please check carefully up and below information about our go kart clutch 3/4" Bore 10T shaft fitment before your purchasing, If you have any question, please contact us first, thank you!.
Check Stock

CUKUSIN Outboard Engine 4 HP 4 Stroke Outboard Boat Motor Air Cooling System, Strong Shaft

  • 【Convenient Use,Easy Operation And Convenient Maintenance】: Durable:Comparable Lubricating System For Four Stroke Outboard Engine Maneuverable and safe twist grip throttle control. Its weight is 15 KG..
  • 【Out Board Motor Speed and Luxury Rack】: 4-Stroke, 4.0 HP - Using 4 Stroke Power, Air Cooling Technology To Improve The Reliability Of The Whole Machine...
  • 【Universal Motors, High Performance, Reliable Quality】: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly.Suitable for: Freshwater and saltwater..
  • 【Superior Air-Cooling System and Big Fuel Tank】: Outboard Boat Motor installed with own patented engine Air-cooling system, allows you to fish all day long without overheating. Propeller Spec. 18cm..
  • 【Gift】We will pack the LIFT JACKET(gift), one more throttle cable comp(gift), one more clutch(gift), one more propeller(gift) together, those commonly used material will be convenient for you to use the motor..
Check Stock

MotorGuide R3 Transom Mount Hand-Control, Black, 30-Inch (940100170)

  • Classic twist-tiller operation equipped with the 3-blade Machete propeller.
  • Digital Power Management technology extends battery life up to 5 times for longer running between charges.
  • Tough aluminum 7-position mount gives you greater flexibility and adaptability.
  • Lower unit constructed of solid steel and aluminum with a powder coat finish to withstand the toughest conditions.
  • Reversible motor head for bow or transom mount operation.
Check Stock

BACOENG Stainless Steel 115 Volt Inline Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 1/2” x Outlet 1/2” MPT

  • SPECIFICATIONS: 1/2inch MPT Inlet&Outlet.
  • FDA FOOD COMPLIANT - Stainless steel is used in professional setups because it is a durable, food-grade metal that can withstand caustic chemicals and can be effectively sanitized..
  • EASY TO USE: Prime by running liquid through pump prior to turning on.
  • The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
  • Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
  • MATERIAL PERFORMANCE: Pump extraction medium temperature changes should be controlled within 100℃, high temperature does not exceed 120℃. Shaft bearing adopt special ceramics material which make it characterize strong resistance for abrasion and corrosion..
  • MAGNETIC: Fully sealed pump motor with connecting magnetic shaft and magnetic propeller.
  • Magnetically coupled for enhanced operation.
Check Stock

Southwest Speed New 55-56 Chevy Factory Replacement Clutch Pedal KIT TRI-5 1955 1956 150 210 BEL AIR Nomad Includes Pedal Cross Shaft Sleeve BUSHINGS SPACERS Return Spring Bracket Retainer

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Kit that includes a Clutch Pedal Cross Shaft Sleeve, Two Nylon Bushings, Cross Shaft Steel....
  • This Southwest Speed clutch pedal kit is a reproduction of the original clutch pedal parts used on all 1955-1956 Chevy Passenger Cars with manual....
  • Kit Includes: > Southwest Speed Clutch Pedal Cross Shaft Sleeve (SWS # 650-4658) > Southwest Speed Clutch Pedal Cross Shaft Sleeve Nylon Bushings (SWS....
  • Southwest Speed Clutch Pedal Return Spring Bracket (SWS # 650-4662) > Southwest Speed Clutch Pedal Splined Output Arm (SWS # 650-4664) > Southwest....
  • Applications: > 1955-1956 Chevy Bel Air > 1955-1956 Chevy 150 > 1955-1956 Chevy 210 > 1955-1956 Chevy Nomad > 1955-1956 Chevy Sedan Delivery.
Check Stock

Gasoline Boat Engine Motor 4 Stroke 15HP Inflatable Fishing Boat Gas Engine Motor 196CC Single Cylinder for 10-20ft Fishing Boats Foam Boats, Up To 12.5 Mile/H (15HP 4-Stroke Gasoline Engine)

  • 【HIGH SPEED POWERFUL ENGINE】Strong power, speed can reach 12.5 mile/h. Powered by a 15hp single-cylinder 4-stroke universal gasoline fishing engine, this gasoline engine power directly drives the propeller to rotate at a high speed through the coupling drive shaft to generate driving force to push the boat forward..
  • 【INGENIOUS STRUCTURE DESIGN】Ingenious design, simple structure and light weight. The propeller-mounted machine adopts the structure of the gasoline engine to directly drive the propeller, eliminating the need for complex mechanisms such as clutches and transmissions, making the product structure very simple and practical, and the frame and armrests are made of high-quality pipes..
  • 【MAIN PARAMETERS】Model: GB420, Displacement: 420CC, Power: 9KW, Horsepower: 15HP, Speed: 3600 RPM, Speed: up to 12.5 mile/h, Starting method: Manual Start, Fuel type: ≥ 92 unleaded gasoline, Fuel tank capacity: 203 fl oz, Engine oil volume: 37 fl oz, Bore diameter: 3.5'', Bracket size: 92'' x 16'' x 7.5'', Machine size: 18'' x 18'' x 14''. (Package includes: 1 x GB420 Gasoline Engine + 1 x Bracket.).
  • 【WIDE APPLICATION】Economical and practical gasoline bost engine with strong applicability, can be widely used in the installation and use of 10-20ft ....
Check Stock

Newport Vessels Pontoon-Series 86lb Thrust Saltwater Electric Pontoon Trolling Motor with Deck Mount Bracket & 55 Shaft

  • Mount Bracket: Nearly indestructible mount bracket can be located anywhere on your pontoon or deck boat. Latch door allows motor to be easily removed....
  • Shaft: The 55 Inch Long Fiberglass Shaft is both durable and adjustable.
  • Battery Cables: 66" Battery Cable Leads are made from marine grade copper with tin coating for corrosion resistance, w/ ring battery connectors.....
  • Propeller: Includes a fiberglass reinforced 3 blade propeller for tough environments and all day trolling.
  • Includes: 50 Amp Circuit Breaker, Propeller, Mount Bracket, Installation Hardware.
Check Stock