Categories

Best Psi Gas Regulator

iSpring 14702 APR40 Pressure Regulator Filter Protection Valve with 1/4\ Quick Connect, 40 Psi, white

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" - 8" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as 13/16 inch..
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16"..
  • MARKING - Model: RV47L, Marking: 1/2 PSIG, Po 4" - 8". Inlet pressure 1/2 PSI. Adjustable outlet pressure 4" - 8" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-7/8” W x 2-1/4” D x 2-1/2” H. This is a small size regulator. Refer to pictures for detailed dimensions..
Check Stock

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
  • MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....
Check Stock

Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4-Inch Male Flare Outlet Connection, Heavy-Duty Handle, Self-reseating Relief Valve, Nitrogen Regulator Hvac, Helium Regulator, by NAKAO

  • ➤Application: Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas that is stored in a pressurized tank.great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering.
  • ➤Accurate Pressure Gauge: Nitrogen regulator hvac, there are two Easy to Read 2 Inch pressure gauge, which covered with scratch-resistant plastic protective film and rubber cover. 0-4000PSI cylinder gauge, 3000PSI of Max input pressure, 0-600PSI output gauge, 500PSI of Max output pressure. 600PSI of safety output pressure..
  • ➤Connections: Helium regulator, CGA-580 Inlet Connector, fits all Nitrogen, Argon, Helium, and Inert Gas Tanks, 1/4" SAE Male Flare Outlet Connection - 7/16-20 Threads for easy installation.
  • ➤Structure: Nitrogen Regulator 0-600PSI CGA580 Inlet, Solid brass, Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system),Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • ➤Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!.
Check Stock

SKYTOU Dual Gauge CO2 Regulator, Keg Beer Regulator CGA-320 Inlet for Draft Beer Homebrew Kegerator Dispensing Regulator

  • ❤【Double Gauge】: The top gauge (0-60psi) of this CO2 regulator shows you how much pressure is being provided to the kegs, the side gauge(0-3000psi) of this CO2 regulator shows you how much CO2 is left in your cylinder/tank..
  • ❤【Compatible & Safe】: This CO2 regulator works with any CO2 tank with a CGA-320 valve. It comes with a CGA-320 Female thread and a shut off valve allows you to turn the gas flow on / off and prevents liquid from backing into the regulator..
  • ❤【Premium Material】: The Draft Beer Dispensing CO2 Regulator adopts to food grade high-strength copper chrome decompression material and sturdy rubber boots that help protect them from damage. And Inside Safety Pressure Relief Valve springs also have high fatigue strength and durability..
  • ❤【Easy To Install】: Slap this CO2 regulator on a food grade CO2 tank, connect a gas line ( ID 5/16' or 3/8”) and carbonator, and you have a lot cheaper carbonated water than buying carbonated water bottles directly..
  • ❤【Suitable Occasions】: Particularly suitable in a Shop,Bar,Home,Out Door,Plants etc.....
Check Stock

JR Products 07-30325 High Pressure Regulator, RED

  • ✓ MEASURE YOUR PRESSURE – Use Gas One’s built-in PRESSURE GAUGE to determine and regulate your propane PSI. Measuring from 0-60 psi (as well as 1-4 100xKPA), Gas One’s Pressure Gauge lets users control their heat with a precise level of accuracy.
  • ✓ USER FRIENDLY - This Regulator Hose 0-30 PSI adjustable output is must have item for your propane burners, turkey fryers, heaters, smokers and all other propane appliances, Easy to use and good for secure gas flow, No gas leak, Simply connect and go, Extremely reliable.
  • ✓ DURABLE AND STURDY CONSTRUCTION - Our Propane hose measures 4FT (48in) long and fits type-1 (QCC-1) tank connections, Long-lasting and reliable, Goes for a long time, Heavy-duty and good for use with high-pressure burners.
  • ✓ COMPLETELY SAFE- Top Quality Regulator/Hose for use on turkey fryers, smokers and much more, Good for use with any burners compatible with fit, Ensures safe gas flow.
  • ✓ STANDARD FITTING - 3/8-inch flare fitting has an outside diameter of 5/8 inches in order to accommodate for the flare seat, Trouble-free and has easy attachment *Tools are required for secure leak free connection to your propane appliance, Output of adjustable 0 to 30PSI.
Check Stock

OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8\ UNF-18RH Fittings

  • Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • 6.56 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator..
  • 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks..
Check Stock

TeeJet 23120-3/4-PP Pressure Regulator with 200 PSI Pressure Gauge (Bundle, 2 Items)

  • Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
  • Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
  • Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
  • Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
  • Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..
Check Stock

Dbgogo CGA-320 Keg CO2 Regulator, Brewing Dual Stage Gauge Beer Kegerator Pressure Regulator with 1/4” & 5/16” Quick Disconnect Barb Connectors and Safety Pressure Relief Valve for Co2 Cylinder Tank

  • Heavy duty CGA-320 beer keg co2 regulator, no leaks: upgraded brewing beer kegerator pressure regulator features a heavy-duty forged brass body for sturdiness and durability. CGA-320 co2 regulator fits all standard co2 cylinders tanks with CGA-320 outlet. CGA320 cylinder fitting features a hexagonal design for easy tightening with an adjustable wrench. just put a white sealing washer into gas cylinder connector, which can prevent connection between co2 cylinder and keg regulator from leaking..
  • Stable, easy-to-read, drift-free dual gauge: Dbgogo co2 tank regulator features dual pressure gauges, 0-60 psi output pressure gauge displays amount of co2 pressure provided to beer keg, 0-3000 psi cylinder pressure gauge displays amount of co2 pressure left in cylinder. dual pressure gauge regulator can accurately and stably monitor working pressure in home-brewed beer carbonation system at any time, and reading is simple, which is very suitable for brewing carbonated beverages, beer and tea..
  • Easy to manually adjust system pressure, locking ring maintains stable pressure setting: co2 regulator has 2 manual adjustment knobs to control entire brewing system pressure. you can set beer keg pressure by slowly turning pressure adjustment knob in “+” direction. tu....
Check Stock

DozyAnt 5 feet 0-20 PSI Adjustable High Pressure Propane Regulator with Hose for QCC1/Type1 Propane Tank Cylinder Fits for LP Gas Grill Turkey Fryers Patio Heaters and More Appliances-Safety Certified

  • Fits QCC1/Type1 LP gas propane tanks and cylinders and 3/8-inch female flare connection. Great for BBQ, camping, tailgate party, heating needs or having a patio/camping outdoor cookout..
  • Adjustable 0-20 PSI high pressure output propane regulator with 5 feet hose is a must have item for your propane burners, stove, turkey fryers, heaters, smokers. Not suitable for appliances which need low pressure regulator..
  • High quality this product itself with safety certification and excellent sealing quality is promised for your safety. This propane regulator with hose has excess flow protection for your safety and will automatically shut off..
  • 100% solid brass corrosion resistant construction fitting, and provides secure, airtight connection between propane tanks cylinders and propane gas appliances..
  • No tools needed, easy and quick attachment for easier installation.DescriptionIt features a 0-20 PSI adjustable high pressure propane regulator with 5ft hose and can be installed quickly and easily to propane tanks and cylinders..
  • The red knob can be regulated the gas flow and pressure.( Adjustable pressure range: 0-20PSI ).
  • The size of a 3/8 flare nut is 5/8 in order to accommodate for the flare seat..
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • 【Hight Quality & Sturdy Argon Regulator with Hose】Argon flow gauge regulator's body is made of high-quality brass, being sturdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one u....
Check Stock

Argon CO2 Flow Meter Regulator with 80 Inches 6.6Ft Gas Hose for TIG MIG Welder 10 to 60 CFH - 0 to 4000PSI Pressure Gauge CGA-580 Inlet Precise Brass Flow Meter

  • [APPLICATIONS] - Our gas pressure regulator/flowmeter can be used with a variety of gas cylinders including argon, helium, nitrogen, and argon/carbon....
  • [CGA580 CONNECTION] - The Flow Meter Regulator is suitable for standard Gas tanks with CGA-580 inlet connection, with a unique filter port design on....
  • [MEASUREMENT UPGRADE] - The 4000PSI gas meter is more widely used than 3500PSI. If you need to measure more corrosive gases, facing some special....
  • [RELIABLE QUALITY] - The body of our gas flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The....
  • [PACKAGED WITH HOSE] - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and....
Check Stock

MCAMPAS 10 Feet 1/2 ID Natural Gas Quick Connect Hose and Regulator Replacement for Kitchen-Aid 710-0003 Gas Grill Conversion Kit,Convert 4-Burner Cabinet Style Gas Grill to Natural Gas

  • Natural gas hose and regulator for Kitchenaid gas grill conversion connection kit includes 10-foot length 1/2 inch ID natural gas hose with quick....
  • 10 feet 1/2" ID gas quick connect hose with 1/2" male quick plug, 3/4-16 UNF female flare fitting on the other side.
  • 5.9" manifold gas regulator hose kit - 1/2 PSI（3.5 Kpa) natural gas regulator valve. Can be switched manually natural Gas Or Propane gas regulator....
  • Compatible with converts these kitchenaid grill models to natural Gas: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A,....
  • Used to convert the home's natural gas pipeline or large LP gas Gas tank cylinder quick connection to existing low pressure supply gas grill....
Check Stock

Argon CO2 Regulator Gauge Welding Gas Regulator with 6.6Ft Gas Hose CGA580 Inlet Connection 0-4500PSI/0-10BAR Input Pressure

  • 【CGA-580 Connection】The Argon regulator with CGA-580 Inlet Connection fits standard Argon, CO2 Gas Tanks from any supplier. The gas regulator is a standard pressure control valve that reduces the input pressure from gas stored in a tank.
  • 【Accurate Pressure Gauge】Input pressure: 0-4500PSI. The Argon CO2 Regulator has two Easy to read pressure gauge, the argon flow meter provides accurate measurement of gas. And it has Internal safety pressure relief design to protect you form danger..
  • 【Brass Material】Our welding gas regulator is made of solid brass, so the surface can keep a good looking for a long time. Precision thread design ensures high sealing performance and avoids gas leakage..
  • 【General Feature】A 6.6Ft gas hose ensures your tanks at a safe distance from your Mig Tig welding projects, 5/8'' Female and 9/16" male outlet connection. And the filter structure at the CGA-580 connection effectively prevent debris in the argon tank entering the gauge with the airflow..
  • 【Application】Our welding regulator is pefect for MIG and TIG welding. It is an economic alternative for you to get more precise gas metering, like the accurate reading of argon regulator would help you to adjust pressure before welding..
Check Stock