Best Ptfe Braided Packing - TopShopReview.com

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....

Check Stock

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Check Stock

EVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT

PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..

Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
middle layer: 304 stainless steel wire mesh sleeve.
outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

Check Stock

EVIL ENERGY 6AN Swivel Hose End Fitting Straight for Braided CPE Fuel Hose Blue&Red 2PCS

Please attention that 6AN straight fitting only be worked with Braided CPE fuel line. It can not be installed on PTFE Hose..
Thread Size of 6AN hose fitting is 9/16-18UNF and the braided CPE fuel line which works with should be 3/8"..
Swivel design for easy assembly, the adjustable AN wrench is highly recommended..
Package Inclued: 2 pcs x 6AN straight swivel hose ends.
EVIL ENERGY Provide different kinds of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

Check Stock

uxcell PTFE Ball, 22mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

PTFE Ball: 22mm/0.87-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock

uxcell PTFE Ball, 36mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

PTFE Ball: 36mm/1.42-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock

uxcell PTFE Ball, 19mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

PTFE Ball: 19mm/0.75-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock

uxcell PTFE Ball, 25mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

PTFE Ball: 25mm/0.98-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock

uxcell PTFE Ball, 15mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

PTFE Ball: 15mm/0.59-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock

Othmro PTFE Ball, 36mm/1.4\ Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

[Features]-PTFE can resist most chemicals, usually high temperature resistance, and has a low friction, non-stick surface, excellent electrical insulation properties, non-flammable, low water absorption..
[Function]-Used for chromatographic column packing and mixing beads, PTFE balls can reduce the bumps when corrosive reagents boil..
[Advantages]-Compared with other fluoropolymers (such as FEP and ETFE), PTFE can usually withstand higher temperatures..
[Temperature Resistance]-PTFE is inert to most liquids and vapors, and can be used from -100 degrees Fahrenheit to 545 degrees Fahrenheit..
[Wide Application]-PTFE balls are widely used in chemical, machinery, electronics, ball valves, electrical appliances, aerospace and other fields..

Check Stock

Lightweight Gaming Mouse Honeycomb Design RGB Backlit Support Custom Buttons Maximum Support 12000DPI Black

[RGB cool glowing mouse]: The mouse has 4 super dazzling light effect modes (7 colors), even if the game player is in the absence of light, playing....
[Ultralight super braided cable]: The innovative cable uses pure copper braided wire, and the data transmission delay is as low as 0.01S. Pull the....
[PTFE mouse foot]: The mouse pad is made of high-end PTFE material, low friction, with N6400 sensor, sensitivity up to 6400DPI, which can achieve....
[Ergonomic mouse]: The well-designed new honeycomb perforated shell will not be fatigued after long time use..
[High-precision 2000W times]: The mouse uses Omron's 20 million times switch. Ensure that the mouse is in an ultra-accurate state for a long time..

Check Stock