Categories

Best Ptfe Filament Packing

Official Creality 3D Capricorn XS Series Bowden Tube, PTFE Bowden Tube (2 Meters) with 4Pcs PC4-M6 Fittings and 4Pcs PC4-M10 Fittings for 3D Printer 1.75mm Filament

  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing..
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Specifications: 2M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 4mm outer diameter). Reducing the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
Check Stock

4Rolls Bi Directional Filament Tape, Fiberglass Reinforced Strapping Tape, 6.7mil x 2inch x 55yds, BOMEI PACK

  • 6.7 mil thickness clear filament duct tape, thick enough, better adhesion, strong bonding. It is perfect for heaviest, toughest jobs. Cut by scissors..
  • Transparent filament strapping tape with smooth surface is perfect for packing, strapping, fixing, reinforcing, repairing and palletizing..
  • With Special formulated, bi filament tape adhere to variety of surfaces: glass, wood, plastic, metal, fiberboard, cardboard etc....
  • Filament packing tape with weatherproof, moist resistant, UV and temperature resistant, suitable for most repairs, green house and outdoor use..
  • Bi filament fiber reinforced tape is ideal for furniture maintenance, heavy goods wrapping, carton sealing, carpet fixing, toy& vehicle patching and protecting..
Check Stock

Sovol Filament Dryer, SH01 Filament Dehydrator 3D Printer Spool Holder, Dry Box for Keeping Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm Filament and PLA PETG TPU ABS Material

  • 【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament..
  • 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect..
  • 【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality..
  • 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation..
Check Stock

PTFE Bowden Tube 1M 1PCS+ 6pcs KJH04-M6 Fittings + 6pcs JP4-01 Pneumatic Fittings with PTFE Tube Cutter for 3D Printer 1.75mm Filament

  • 3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate....
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 6 * JP4-01 and 6 * KJH 04-M6 bowden tube fitting to secure PTFE in extruder and hotend..
  • Easy to Install: the pneumatic fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube....
  • Compatibility: fit for 3D Printer 1.75mm Filament and other devices..
Check Stock

Creality Ender 5 Pro 3D Printer Upgrade Silent Motherboard and Metal Feeder Extruder with Capricorn Bowden PTFE Tube

  • 【Upgraded V4.2.2 silent Mainboard】Ender 5 pro Upgrade Motherboard Silent Mainboard with TMC2208 Driver.
  • 【Metal Extruder Frame】Creality Ender 5 Pro 3D Printer is a highly durable metal extruder . This feature provides stronger pressure while pushing filament through the 3D Printer's nozzle.
  • 【Premium PTFE Tube-High】The Capricorn Bowden PTFE Tubing has a 1.9mm ± 0.05mm inner diameter, reducing any excess wiggle room and preventing the filament from buckling inside of the tube.
  • 【Cube Frame 3D Printer】Ender 5 Pro has a rigid extruded aluminum cube frame, making it very sturdy when assembled properly, which goes a long way to increasing print quality.
  • 【1-year warranty】We have equality warranty and provide after-sale customer service for the product. If any quality issue, Please feel free to contact us via Amazon, we will offer professional instructions and solutions timely..
Check Stock

4 Rolls Bi Directional Filament Tape, Fiberglass Filament Strapping Tape, for Shipping and Packing, 5.9mil x 2inch x 55yds, BOMEI PACK

  • 5.9 mil thickness clear filament duct tape, thick enough, better adhesion, strong bonding. It is perfect for heaviest, toughest jobs. Cut by scissors..
  • Transparent filament strapping tape with smooth surface is perfect for packing, strapping, fixing, reinforcing, repairing and palletizing..
  • With Special formulated, bi filament tape adhere to variety of surfaces: glass, wood, plastic, metal, fiberboard, cardboard etc....
  • Filament packing tape with weatherproof, moist resistant, UV and temperature resistant, suitable for most repairs, green house and outdoor use..
  • Bi filament tape is ideal for furniture maintenance, heavy goods wrapping, carton sealing, carpet fixing, toy& vehicle patching and protecting..
Check Stock

Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS,....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 1 Meter in length PTFE tubing. F1RST LAYER is an authorized distributor of Creality and Capricorn 3D Printing products. Please contact us directly for....
Check Stock

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament 2.0mm ID/4.0mm OD 1.5 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....
Check Stock

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) 2.0 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality..
  • LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping..
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!.
Check Stock

Authentic Creality Assembled Hotend Kit for Ender 3 / Ender 3 Pro/Ender 3 V2 with Capricorn PTFE and Upgraded Pneumatic Fittings, Thermistor, Heating Element, MK8 Sock and 4 Extra Nozzles

  • ...R series. Also included are some extra brass nozzles, a hotend sock and upgraded Capricorn PTFE tubing which drastically improves the performance of this part over its standard PTFE option..
  • Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Capricorn PTFE is also manufactured to the highest specifications for 1.75mm filament to ensure that there is no space in the tube once the filament is inside. This perfect fir ensures much better results on retaction moves and helps to ensure a steadier and even flow rate from your hotend!.
  • Upgraded Pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fitting is a PC4-M6 and the hotend fitting is PC4-M10. These are the standard sizes for most open source 3D printers and the same sizes used by most Chinese manufacturers..
  • 2 complimentary hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency..
  • F1rst Layer is proud to provide 24/7 customer supp....
Check Stock

SIQUK 2 Pcs PTFE Teflon Tube 2M 4 Pcs PC4-M6 Quick Fitting 4 Pcs PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament

  • CHPOWER PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL..
Check Stock

uxcell PTFE Ball, 22mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

  • PTFE Ball: 22mm/0.87-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock

uxcell PTFE Ball, 36mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

  • PTFE Ball: 36mm/1.42-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock