Best Ptfe Graphite Fiber Braided
LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)
- This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
- PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
- Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
- This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
- 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check StockAutoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
- 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1,6AN PTFE straight hose end*6,6AN PTFE 45 Degree hose end*2,6AN to 3/8" hose adapter fitting*2, AN6 to 3/8"quick disconnect male*1,6AN to 5/16" hose adapter fitting*1..
- 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
- 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
- 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
- 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check StockTOAUTO 6KG Propane Melting Furnace TMF6000 Gas Kiln 1300°C /2372°F for Scrap Metal Recycle Gold Silver Copper Aluminum Melting Refining Smelting (TMF6000-V2)
- ...... No matter you are new start or an seasoned pro craftman, this luxurious propane melting furnace will fit your needs and be the best melting tool to create your crafts..
- High Standard -- 100% stainless steel made propane furnace body with thick insulating material coated for high strength and safety. High-density graphite crucible and high class ceramic fiber blanket provided a great thermal conductivity which is fast and effective..
- Great Performance -- 12.8KG/28LB large capacity, 80000 BTU burner output, gas regulator adjusts 0-30 PSI, easily and quickly heat up to 2700°F/1482°C. Open up and increase the gas regulator and air valve for higher temperature..
- Deluxe Kit -- 1* stainless steel propane furnace, 1* graphite crucible, 1* gas regulator with PSI gauge, 1* burner air intake, 1* brass gas nozzle, 1* PTFE tape, 1* ceramic fiber pad, 1* fire brick, 1* tongs, 1 pair of gloves..
- Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty..
Check Stock8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black
- 8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
- Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
- Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
- The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
- PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
- Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check StockEVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT
- PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
- Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
- Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
- PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
- PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check StockSINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS
- 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
- 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
- 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
- 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
- SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check StockNew All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015
- ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
- ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
- ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
- ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
- middle layer: 304 stainless steel wire mesh sleeve.
- outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
- ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check StockEVIL ENERGY 6AN Swivel Hose End Fitting Straight for Braided CPE Fuel Hose Blue&Red 2PCS
- Please attention that 6AN straight fitting only be worked with Braided CPE fuel line. It can not be installed on PTFE Hose..
- Thread Size of 6AN hose fitting is 9/16-18UNF and the braided CPE fuel line which works with should be 3/8"..
- Swivel design for easy assembly, the adjustable AN wrench is highly recommended..
- Package Inclued: 2 pcs x 6AN straight swivel hose ends.
- EVIL ENERGY Provide different kinds of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check StockFiblink Saltwater Graphite Jig Jigging Spinning Fishing Rod Deep Sea Jig Pole 6-Feet Heavy 80-120lbs
- Designed specifically for vertical jigging.
- 1-Piece/2-piece graphite-glass fiber composite blank,offers incredible pulling power.
- 5+1/6+1 Stainless steel guide frames & ceramic inserts reducing friction from braided lines.
- Fiblink Warranty:One Year Warranty.Just feel free to contact seller directly if there is anything wrong with the Fiblink Jig Spinning/Casting Rod, we....
Check StockFiblink Saltwater Graphite Jig Jigging Spinning Fishing Rod Deep Sea Jig Pole 6-Feet Medium Heavy 50-80lbs
- Designed specifically for vertical jigging.
- 1-Piece/2-piece graphite-glass fiber composite blank,offers incredible pulling power.
- 5+1/6+1 Stainless steel guide frames & ceramic inserts reducing friction from braided lines.
- Fiblink Warranty:One Year Warranty.Just feel free to contact seller directly if there is anything wrong with the Fiblink Jig Spinning/Casting Rod, we....
Check StockLightweight Gaming Mouse Honeycomb Design RGB Backlit Support Custom Buttons Maximum Support 12000DPI Black
- [RGB cool glowing mouse]: The mouse has 4 super dazzling light effect modes (7 colors), even if the game player is in the absence of light, playing....
- [Ultralight super braided cable]: The innovative cable uses pure copper braided wire, and the data transmission delay is as low as 0.01S. Pull the....
- [PTFE mouse foot]: The mouse pad is made of high-end PTFE material, low friction, with N6400 sensor, sensitivity up to 6400DPI, which can achieve....
- [Ergonomic mouse]: The well-designed new honeycomb perforated shell will not be fatigued after long time use..
- [High-precision 2000W times]: The mouse uses Omron's 20 million times switch. Ensure that the mouse is in an ultra-accurate state for a long time..
Check StockPiscifun Carnivore X Baitfeeder Spinning Reel 5.1:1 Shielded Stainless Steel BB - Carbon Fiber Drag for Live Liner Bait Fishing Action Baitrunner for Freshwater Saltwater 4000
- Incredibly Powerful & Strong - The main body and the rotor of Carnivore X are made of high-end graphite, ensuring the overall strength of the reel, this maked it suitable for many different fishing techniques. The top class carbon fiber washers deliver up to 26.5lbs/12.5kg of drag power..
- Super Smooth - The precise cut gearing system greatly ensures the smoothness and performance of the reel. Triple premium carbon drag washers gives you ultimate smooth drag operation when battling big fish..
- Durable - Piscifun Carnivore X baitfeeder spinning reel with classic front and rear drag functions. Provides incredible durability to handle both freshwater and saltwater fish..
- Braid Ready Spool - The Carnivore X baitfeeder spinning reel comes with a forged and machined aluminum spool which is braid ready to eliminate mono backing when spooling braided fishing line. The free extra graphite spool gives you an extra option..
- Power Handle - All models of Carnivore X reels are equipped with a large T-shaped rubber handle, which makes the use of reel easier and greatly improves the comfort of the grip..
Check StockTIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings
- ... PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
- High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
- Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
- Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 degree PTFE Fitting x 2, AN-6 180 degree PTFE Fitting x 2..
Check Stock