Peak Design Everyday Backpack 30L (Black Camera Bag)
- Weatherproof design: Drain opening in the bottom area and integrated zip bag suitable for the magnetic flap of the ravel backpack 45 L..
- Unsurped Welded silicone coating and reinforced base area. A one handed drawstring helps with closing..
- Material: 70D ripstop nylon and a waterproof silicone coating, 200D floor reinforcement, Hypalon..
- Perfect fit: Tailored to travel backpack 45L, even when fully expanded..
- 100% recycled nylon case with DWR impregnation and double PU layer..
Check StockWhatman 1441-110 Quantitative Filter Paper Circles, 20 Micron, Grade 41, 110mm Diameter (Pack of 100)
- Recommended for analytical procedures involving coarse particles or gelatinous precipitates (iron or aluminium hydroxides).
- Used in quantitative air pollution analysis as a paper tape for impregnation when determining gaseous compounds at high flow rates.
Check StockEVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only
- Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
- Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
- The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
- EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
- Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock
100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters
- 【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
- 【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
- 【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
- 【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
- 【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..
Check StockMidwest Hearth 3421 Acclaim Gasket Kit for Vermont Castings Wood Stoves
- ABRASION/CRUSH RESISTANT - Graphite impregnation/lubrication makes gasketing more abrasion resistant..
- GRAPHITE IMPREGNATED FIBERGLASS - Less likely to get stuck with creosote ensuring a better and more consistent seal..
- COMPLETE KIT - 8' of 5/16" Gasket, 4' of 5/16 Wiremesh Gasket, 6' of 1/2" Gasket,4' of 3/16" Gasket, Adhesive, and Instructions.
- PROFESSIONAL STRENGTH CEMENT - Withstands 2000-degrees Fahrenheit. Adheres to all types of stoves from steel to cast iron..
- MADE IN USA - Quality manufactured in the United States..
Check StockFjällräven Unisex's PFC-Free Eco DWR Impregnation, Color, 0.5 L
- It is a impregnation spray that is made with Fluorocarbon-free premium and polyurethane active.
- It uses the biodegradable as an active agent for better protection.
- It comes in a practical bottle that is very easy to use and to carry it with you.
- It is tested and proved to give optimal results.
Check StockSINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS
- 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
- 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
- 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
- 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
- SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock
Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
- 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
- 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
- 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
- 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
- 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock
WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided
- 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
- 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
- 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
- 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check StockMidwest Hearth Wood Stove Replacement Gasket for Woodburning Stoves - Graphite Impregnated Fiberglass Gaskets (1\ x 72\ Rope)
- ABRASION/CRUSH RESISTANT - Graphite impregnation/lubrication makes gasketing more abrasion resistant..
- GRAPHITE IMPREGNATED FIBERGLASS - Less likely to get stuck with creosote ensuring a better and more consistent seal..
- BLACK GASKET - Used by leading stove manufacturers due to better aesthetics and higher performance..
- INDIVIDUALLY BAGGED - Only order the gaskets you need to waste less and save money..
- MADE IN USA - Quality manufactured in the United States..
Check StockMidwest Hearth Wood Stove Replacement Gasket for Woodburning Stoves - Graphite Impregnated Fiberglass Gaskets 5/8 x 84 Rope
- ABRASION/CRUSH RESISTANT - Graphite impregnation/lubrication makes gasketing more abrasion resistant..
- GRAPHITE IMPREGNATED FIBERGLASS - Less likely to get stuck with creosote ensuring a better and more consistent seal..
- BLACK GASKET - Used by leading stove manufacturers due to better aesthetics and higher performance..
- INDIVIDUALLY BAGGED - Only order the gaskets you need to waste less and save money..
- MADE IN USA - Quality manufactured in the United States..
Check Stock
TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings
- Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
- High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
- High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
- Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
- Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
Check StockNatural Gas - SRV10002264 (Replaces 10002264) - Replacement 3 Way Pilot Assembly for HHT/Majestic/Monessen Natural Gas Fireplaces
- ABRASION/CRUSH RESISTANT - Graphite impregnation/lubrication makes gasketing more abrasion resistant..
- GRAPHITE IMPREGNATED FIBERGLASS - Less likely to get stuck with creosote ensuring a better and more consistent seal..
- BLACK GASKET - Used by leading stove manufacturers due to better aesthetics and higher performance..
- PROFESSIONAL STRENGTH CEMENT - Withstands 2000-degrees Farenheit. Adheres to all types of stoves from steel to cast iron..
- MADE IN USA - Quality manufactured in the United States..
Check Stock
