Categories

Best Ptfe Injection Product

EVIL ENERGY 6AN PTFE E85 Fuel Line Hose Nylon Braided 10FT Black(5/16 Inch ID)

  • ID: 5/16". OD: 0.465inch.Length: 10 feet. Please measure before purchase!.
  • PTFE fuel line can be used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc..
  • Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 3000 psi. Bursting Pressure: 10000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

EVIL ENERGY 8AN PTFE E85 Fuel Line Hose Nylon Braided 20FT Black(0.394 Inch ID)

  • ID: 13/32". OD: 0.543inch.Length: 20 feet(6M). Please measure before purchase!.
  • PTFE fuel line can be used as fuel injection hose, boost line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, fuel supply line, etc..
  • Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 2500 psi. Bursting Pressure: 8000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

PEKYBIO 2ML Autosampler Vial, Clear 11mm Wide Opening Crimp Top Vial, GC Vial with Graduation, 11mm Aluminum Silver Crimp Seals &Septa, 100pcs

  • Manufactured with Blue Polypropylene 9-425 9mm type threaded vial caps.
  • Pre-slit liner , more easy to pierce , protect injection needle.
  • With Blue PTFE Faced White silicone ,pre-slit Liner.
  • Blue screw cap with hole + PTFE / Silicone septa Compatible with most Autosampler vials.
  • Suitable for 1.5 mL, 1.8 mL, 2 mL 9-425 vials.
Check Stock

Mushroom Jar Lid for Liquid Culture Stainless Steel Metal Wide Mouth (12 Pack)

  • this version is designed specifically for liquid culture cultivation (not grain spawn), because they feature a hydrophobic PTFE filter which can be held upside down and not leak. If you would like lids for grain spawn, which need more fresh air exchange, checkout our other listings..
  • professional series wide mouth stainless steel mason jar lids are engineered for reliable repeated use and lasting durability. Designed to make hundreds of runs through the autoclave or pressure cooker..
  • made of 304 Stainless Steel metal to prevent the rusting of standard metal lids. A solid one-piece design and construction makes them simpler to use and clean. Each lid includes a fitted silicone seal that stays in lid when held upside down..
  • They feature a huge 1/2" heavy duty self-healing injection port and a high quality 0.45 PTFE hydrophobic filter so the jars can be held upside down without leaking..
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

HUYUN Generic Mouse Skatez & Mouse Feet & Mice Feet & mouseskates& for Logitech G602 Come with 2 Sets

  • 1.Packing: X2Sets mouse skates , thickness is only 1mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a....
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my....
Check Stock

HUYUN New Mouse Skates & Mouse Feet & Mice Feet & mouseskates for Razer Deathadder Elite （Comes with 2 Sets）

  • 1.Packing: X2Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a....
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my....
Check Stock

HUYUN New Mouse Skatez & Mouse Feet & Mice Feet & mouseskates Replacement for Logitech G403 G603 G703 Come with 2 Sets

  • 1.Packing: X2Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a....
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my....
Check Stock

HUYUN New Mouse Skates & Mouse Feet & Mice Feet & mouseskates for Razer DeathAdder 2013/RZ01-0015 / RZ01-0121 / RZ01-0084 Come with 4 Sets

  • 1.Packing: X4Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a....
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my....
Check Stock

2 Sets Mouse Skates&Mouse Feet&Mice Feet&Mice Skatez&mouseskates Replacement for Razer Mamba 2015 Chroma 5G / Mamba Tournament Edition Gaming Mouse

  • 1.Packing: X2Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a longer time.
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my opinion, and great value..
Check Stock

HUYUN Generic Mouse Skatez & Mouse Feet & Mice Feet & Mouse Skates & for Logitech G102/G PRO Gaming Mouse(Come with 2 Sets)

  • 1.Packing: X2Sets mouse skates , thickness is only 0.8mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product，Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a longer time.
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my opinion, and great value..
Check Stock