Categories

Best Ptfe Packings Cords

Hanes Men's Big and Tall ComfortSoft Moisture Wicking Tagless Tank Undershirts-Multipacks, Assorted 4-Pack, 2X Large

  • NOTE: You may receive either all black or gray/black assorted packings. Colors and Print may vary..
Check Stock

Hanes mens Comfortsoft Moisture Wicking Tagless Tank Undershirts - Multipacks fashion t shirts, Assorted 4-pack, X-Large US

  • NOTE: You may receive either all black or gray/black assorted packings. Colors and Print may vary..
Check Stock

Fudoray Airless Spray Pump 248204 248-204 for Airless Paint Sprayer 695 795 Ultra Max II Gmax 3900

  • Replaces: 248204 248-204 Airless Spray Pump.
  • Airless Spray Pump For Ultra Max II GMax 3900.
  • Performance tested on every single unit with hydraulic oil.
  • Includes Stainless Steel Rod & Packings. A more cost effective model than the Endurance pump.
Check Stock

Graco Paint Sprayer Piston Rod 243174 For Graco 395 stPro 495 StPro

  • The 390 is a solid workhorse built for the professional.
  • Ideal for residential jobs, and the best value in small electric sprayers.
  • Durable Endurance Chromex Piston Pump, with Long Life V-Max Blue Packings, Chromex rod and hardened stainless steel cylinder, lasts 2X longer than the next leading brand.
  • ProConnect One-Part Pump Replacement System Pump swaps out a worn pump in minutes – no tools, pins or parts to lose.
  • Easy Out Pump Filter exclusive inside-out filtering process ensures a quality finish.
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters

  • 【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
  • 【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
  • 【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
  • 【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
  • 【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..
Check Stock

Complete Home Washer Plumbing Repair Kit Assortment, 45 Pieces

  • Contains assorted washers, packings, screws and other repair parts of plumbing repairs Including: Drainage Washers, Faucet Washers, Faucet Screws, Hose Washers, Garden Hose Washers.
  • Durable rubber construction for reliability, Complete home kit for convenience, Designed use is for general repair work, Contains the most popular and widely used sizes.
  • This Qualihome Washer Assortment will repair your leaky faucet in no time. Faucets usually have one or more washer to prevent water from leaking out around the spout.
  • Replacing worn-out washers is an inexpensive alternative to replacing the entire faucet fixture.
  • New washers will return the faucet to like new condition by providing a positive seal. Correcting leaky faucets saves water and energy New washers will return the faucet to like new condition by providing a positive seal. Correcting leaky faucets saves water and energy.
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

sunsu Pet Bathing Tool Set – 7 Pieces Dog Washer Cleaning Adjustable Pressure Foam Sprayer 500cc Soap Dispenser Bottle Spray with Grooming Brush Glove and Connectors (Black)

  • 5-STAGE DETACHABLE DIY ASSEMBLY DESIGN – Anyone can easily DIY assemble this 5-stage detachable type product (head, dispenser foam controller, funnel parts, 500CC bottle, handle). Includes 4 rubber packings inside both sides of dispenser and bottom of handle plus 1 inside the funnel part (3 spare medium). As this is a DIY assembly product, adjustments may be needed. Please refer to how-to video and A+ images. If water leaks, replace with new rubber packing to stop leakage..
  • 10 SPRAYING PATTERNS – Our hose sprayer tool is capable of spraying far and wide to ensure proper coverage to suit your needs. It feature a rotating adjustable nozzle with multiple different settings. Choose from 10 versatile spray patterns ranging from a soft shower to high-velocity jet. The different levels of spray (shower, corn, angle, center, flat, full, jet, mist, soaker, 1/2 vert) are easy to quickly switch between and are all perfectly suitable for any foam spraying job that needs done..
  • MULTIPURPOSE – With our super easy to use spraying tool, your life will become more convenient. This tool is great to use for washing and rinsing your furry friends, but it can also be used for a variety of other purposes. It is a multipurpose tool with various water pressure and ....
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
  • High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
Check Stock

Othmro PTFE Ball, 36mm/1.4\ Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

  • [Features]-PTFE can resist most chemicals, usually high temperature resistance, and has a low friction, non-stick surface, excellent electrical insulation properties, non-flammable, low water absorption..
  • [Function]-Used for chromatographic column packing and mixing beads, PTFE balls can reduce the bumps when corrosive reagents boil..
  • [Advantages]-Compared with other fluoropolymers (such as FEP and ETFE), PTFE can usually withstand higher temperatures..
  • [Temperature Resistance]-PTFE is inert to most liquids and vapors, and can be used from -100 degrees Fahrenheit to 545 degrees Fahrenheit..
  • [Wide Application]-PTFE balls are widely used in chemical, machinery, electronics, ball valves, electrical appliances, aerospace and other fields..
Check Stock