Slip 2000 EWG 4oz.
- Synthetic light Grease: Slip2000 synthetic grease is our Extreme weapons lubricant turned into a light Grease. Egg offers extreme pressure properties that reduce friction and wear on your weapons..
- Protection from corrosion: egg's unique formulation provides a strong Barrier between all metal parts and protects against corrosion. It features a proprietary anti-wear formulation that is easy to Use and extremely long-lasting..
- Without PTFE ingredients: Slip2000 egg does not contain any PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
- Excellent for semi-auto and full auto locking: egg is excellent for Use on all semi-auto and full auto locking lugs, sears, bolts and slides/rails for smooth, clean operation in the extreme cold (-100°f). it will hold up under extreme heat (+750°f) as well.
- Non-toxic and non-hazardous: Slip2000 products are non-toxic and non-hazardous. All Slip2000 products are created with your health and safety in mind!.
Check Stock
Slip 2000 - Extreme Weapons Grease Syringe (EWG), 1 Fluid Ounce / 30 Milliliters
- Synthetic light Grease: Slip2000 synthetic grease is our Extreme weapons lubricant turned into a light Grease. Egg offers extreme pressure properties that reduce friction and wear on your weapons..
- Protection from corrosion: egg's unique formulation provides a strong Barrier between all metal parts and protects against corrosion. It features a proprietary anti-wear formulation that is easy to Use and extremely long-lasting..
- Without PTFE ingredients: Slip2000 egg does not contain any PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
- Excellent for semi-auto and full auto locking: egg is excellent for Use on all semi-auto and full auto locking lugs, sears, bolts and slides/rails for smooth, clean operation in the extreme cold (-100°f). it will hold up under extreme heat (+750°f) as well.
- Non-toxic and non-hazardous: Slip2000 products are non-toxic and non-hazardous. All Slip2000 products are created with your health and safety in mind!.
Check Stockuxcell a12100600ux0244 J Type 90mm x 1.5mm Temperature Controller Earth Thermocouple Probe 2M
- Package: 1pc 2m Teflon PTFE Tube, necessary 3D printer parts..
- Size: 3x4mm (IDxOD), Fit for 3mm filament.
- Function: Used for 3D Printer J-head hotend RepRap Rostock Bowden Extruder Long Distance Feeding..
- Material: Made of PTFE material, With smaller friction coefficient in plastic, is an ideal oil-free lubrication material..
- Feature: Corrosion Resistance, High and Low Temperature Resistant, Self-Lubricating, Non-Sticky Surface..
Check Stock3D Printer Parts Accessories Tool Set Cleaner Kit 41PCS with E3D Nozzles Cleaning Needles Tweezers Heater block and Cover,Tube Throat for Ender 3 Pro/Ender 5/ CR-10/10S
- Aluminum Heater Block: Works perfect with nozzle and nozzle throat..
- Stainless Steel Throat: 3D printer parts aluminum heater block extruder hotend kit is replacement parts for Ender 3 /Ender 3 Pro / Ender 5 /Ender 5....
- 0.4mm Brass Nozzles: The 3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy....
- PTFE Teflon Bowden Tube : PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS,....
- Excellent Cleaning Needles: The E3D nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break.....
Check StockArashi Clutch Cable for KAWASAKI NINJA ZX10R ZX-10R 2011-2017 Stainless Wire Line and Rubber Motorcycle Accessories Green 2012 2013 2014 2015 2016
- -3 hydraulic clutch lines feature clear PVC coated, PTFE lined, premium stainless steel braided hose.
- PVC hose coating is extruded to the stainless braiding, adding great looks and abrasion protection to expensive parts, while offering resistance to damaging UV rays.
- PTFE liner is an inert material, which is compatible with all hydraulic and brake fluids.
- has a heat range of 158 degree F to 500 degree F.
- Stainless steel braid is superior in pressure rating, flame resistance and volumetric expansion to all other materials..
Check StockCreality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing..
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM..
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer..
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when....
Check Stock
HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines
- You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
- Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
- The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
- Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
- Convenient to Use: the thread seal tapes are convenient to use.
- Just clean the 2 threaded connections that need to be sealed.
- Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
- And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
- Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
- If the thread sealing is not good, you can increase the thickness of the tape.
Check StockFor Redcat Blackout Parts Turnbuckle Redcat Blackout Xte Pro Parts 2X Machined Alloy Tie Rod red
- ✔Replacement of redcat Blackout Parts# BS213-016.
- ✔Full redcat blackout xte pro parts set turnbuckles.
- ✔Compatible with Brand name Redcat, BSD Racing Item: RedCat BlackoutSC short-course, XTE Monster Truck, XBE Buggy, BSD Racing monster truck.
- ✔Hard-anodized colour,CNC machined PTFE-coated hardened alloy 6061-T6 The lightweight aluminum alloy material is durable and improves the overall....
Check Stock
Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series
- ...apricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
- ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
- ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is included. Referrring to our 7th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine. (NOTE: The springs are around 25mm long, which is longer than Creality ender 3/ender 3 pro/ender 3 V2 springs. You may use a tool to cut it to be shorter if you need it or adjust the hot bed to be higher to fit the springs.).
- ✔️【Official Creality 3D Store】More than 20 engineers provide....
Check StockPellet Smoker Grill Mesh Mat – Set of 4 Non Stick PTFE BBQ Oven Liner Reusable Baking Sheet Mat for Outdoor Gas Charcoal Electric Grill
- Perfect Grill Mats Group - 3 Solid mats & 3 mesh mats combination. The solid mats are great for food which need cook with liquid and the mesh mats can....
- Premium PTFE-Fiberglass Material - Our BBQ grill mats are made from 100% PFOA-Free materials and premium PTFE-Fiberglass coating, no PFOA, no silicone....
- 100% NON-STICK - You can grill without grease and mats are reusable for years. The non-stick coating protect your BBQ parts from being burnt or....
- REUSABLE AND DISHWASHER SAFE – You do not need to worry about cleaning after your BBQ Party. With our BBQ grill mats ,Cleaning will be a breeze.....
- Once you have any questions ,please do not hesitant to contact with us, UPTRUST will react soon to help you..
Check StockEVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only
- Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
- Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
- The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
- EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
- Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check StockDenso 234-5010 Air Fuel Ratio Sensor
- Denso partners with other manufacturers to supply the parts your car was originally built with. This product is in a Denso package, however the part....
- Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing.
- Manufactured with precision to meet OE standards.
Check StockGates T304 Premium Automotive Timing Belt
- PTFE-infused jackets to reduce frictional losses and tooth shear.
- High-grade HNBR rubber for superior heat and resistance.
- Premium tensile members providing maximum strength.
- Aramid-reinforced nylon jackets and backsides increase durability and lifetime.
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs.
Check Stock
