Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

  • ...: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting:You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it right below the drainage outlet of the sink. P.S. You need to prepare the grease inlet pipe and water drainage pipe by yourself..
  • Well-designed For Wide Use: This commercial carbon steel interceptor calls attention to the thoughtful details as well, such as the solid outlet valve, a handle on the cover for lifting, and practical sealing ring and PTFE tape. You can apply it to restaurants, fast food chains, public canteens, home kitchens, etc..
Check Stock

Harvey 017065 Gas Line PTFE Thread Seal Tape

  • Yellow gas line thread seal tape with PTFE.
  • Extra heavy, full density PTFE tape especially for gas lines.
  • Recommended leakproof sealant for lines carrying natural gas, propane, butane.
  • and water, oil, and chemical installations.
  • Use on pipe, conduit, vales, bolts, anything with a thread.
Check Stock

Suburban Mfg # 6259Apw 10Gal Suburban Door Polar

  • Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape..
  • Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch..
  • 1/2” NPT water heater drain plugs fit for most RV water heater..
  • Wrench prongs for rusted drain valves and petcock drains..
Check Stock

VEVOR Commercial Grease Interceptor 8 LB, Carbon Steel Grease Trap 4 GPM, Grease Interceptor Trap with Side Water Inlet, Under Sink Grease Trap for Restaurant Canteen Factory Home Kitchen

  • ...: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting: You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it right below the drainage outlet of the sink. P.S. You need to prepare the grease inlet pipe and water drainage pipe by yourself..
  • Well-designed For Wide Use: This commercial carbon steel interceptor calls attention to the thoughtful details as well, such as the solid outlet valve, a handle on the cover for lifting, and practical sealing ring and PTFE tape. You can apply it to restaurants, fast food chains, public canteens, home kitchens, etc..
Check Stock

Dixon Valve & Coupling TTB75-5 White Industrial PTFE Tape, 3/4\ (Pack of 5)

  • For use in wrapping pipe threads to create air and water tight connections.
  • 520" long, 3/4" wide, and 3.5 mil thick for multiple uses.
  • Operating temperature range of -212 to +500 degrees F.
Check Stock

Harbor Freight Tools 61377 HFT 1123 Plumber's Teflon Thread Seal Tape, 10 Rolls Per Box

  • No need to use sticky, messy pipe "dope" when you're remodeling or making plumbing repairs.
Check Stock

Libraton Pex Cutter 1-1/4\

  • 【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
  • 【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
  • 【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
  • 【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..
Check Stock

RVMATE RV Water Heater Drain Plug Kit, Include Angled Wrench, 4 Pieces 1/2\ NPT Replacement Plugs and 1 roll PTFE Tape

  • Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape..
  • Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch..
  • 1/2” NPT water heater drain plugs fit for most RV water heater..
  • Wrench prongs for rusted drain valves and petcock drains..
Check Stock

Dixon Valve TTC50 PTFE Industrial Sealant Tape, -212 to 500 Degree F Temperature Range, 3.5mil Thick, 1296' Length, 1/2' Width, White

  • For use in wrapping pipe threads to create air and water tight connections.
  • 1296" long, 1/2" wide, and 3.5 mil thick for multiple uses.
  • Operating temperature range of -212 to +500 degrees F.
Check Stock

Teflon Tape,Plumbers Tape,Plumbing Tape,PTFE Tape,Thread Tape,Plumber Tape for Shower Head,Pipe Sealing,Thread Seal,White (1/2 in 4 Rolls)

  • ✅ SAFE AND SEALED - Our PTFE Plumbers Tape holds in temperatures from -212F to 500F..
  • ✅ USAGE - Shower Heads, Sprinklers, Pipe & Propane Fittings, Gas Heaters, Commercial & Home Appliances.
  • ✅ EASY TO USE - This tape is Anti-Seizing and easy to apply and remove years later!.
  • ✅ MADE TO LAST - PTFE tape will create a water tight seal that will last a lifetime!.
  • ✅ SATISFACTION GUARANTEED - Satisfied or your money back!.
Check Stock

Dixon Valve & Coupling TTB50 PTFE Industrial Sealant Tape, -212 to 500 Degree Fahrenheit Temperature Range, 3.5mil Thick, 520\ Length, 1/2\ Width, White

  • For use in wrapping pipe threads to create air and water tight connections.
  • 520" long, 1/2" wide, and 3.5 mil thick for multiple uses.
  • Operating temperature range of -212 to +500 degrees F.
Check Stock

Poly-Temp 36536 Anti-Seize Ceramic Filled PTFE Thread Seal Tape, 600\ Length x 1/2\ Width x 3.5 Mil Thickness, Cream

  • The Combination of PTFE along with Copper Powders provide the ultimate protection from oxidative chemicals and protects against rust and corrosion, Ideal for all tapper thread connections.
  • PTFE's high lubricity makes for easy assembly, only three wraps needed for most applications, excellent pipe thread sealant up to 550F.
  • Copper filler can withstand temperatures up to 1800F for anti-seize applications, pressures up to 10,000psi.
  • Never dries out, unlimited shelf life, Extremely versatile lubricant and sealant..
Check Stock

Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush

  • Non-hardening, non-toxic paste with PTFE.
  • Use on threaded brass, copper, stainless steel, aluminum, black pipe, tin, polyethylene, polypropylene, polybutylene, ABS, PVC nylon and galvanized pipe threads, hoses and more.
  • Remains pliable in cold temperatures, working range is -100 degrees to 600 degrees fahrenheit.
  • Pressure range is 10,000 psi when sealing liquids and 3,000 psi when sealing gases.
Check Stock