(400MM) / 15.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)
- PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
- It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
- Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
- PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
- Stiring rods - coated in white PTFE，anti-corrosion, acid & alkali resistance, high temperature resistance..
Check Stock(450MM) / 17.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)
- PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
- It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
- Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
- PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
- Stiring rods - coated in white PTFE，anti-corrosion, acid & alkali resistance, high temperature resistance..
Check Stock
Sterling Seal SSI7530.SM2.6 PTFE Virgin Teflon Gasket Material Pack, 6\ x 6\ square, 2 thicknesses - 1/64\
- DO IT YOUR SELF (DIY) MATERIAL - This product is great for your home and workplace projects. Sands, Drills, Cuts with razor or saw & Very Machine able.
- POSSIBLE APPLICATIONS - Arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
- Use PTFE Sheet for making seals, washers and insulators. PTFE is very useful & durable as a low-friction dry bearing surface and is great as a Drum bearing material for dryers.
- Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
- PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications. Contact with food, beverages, cosmetic and pharmaceutical products are suitable.
Check StockSterling Seal SSI7530.SMMD2.6 PTFE Virgin Teflon Gasket Material Pack, 6\ x 6\ square, 2 thicknesses - 1/32\
- DO IT YOUR SELF (DIY) MATERIAL - This product is great for your home and workplace projects. Sands, Drills, Cuts with razor or saw & Very Machine able.
- POSSIBLE APPLICATIONS - Arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
- Use PTFE Sheet for making seals, washers and insulators. PTFE is very useful & durable as a low-friction dry bearing surface and is great as a Drum bearing material for dryers.
- Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
- PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications. Contact with food, beverages, cosmetic and pharmaceutical products are suitable.
Check StockAssigned by Sterling Seal & Supply, (STCC) 7530.0312.12x12.DSC White Virgin Teflon Sheet, 12\ x 12\ Square, 1/32\ Thick by Sterling Seal & Supply (STCC) (Qty 1 Sheet) - DSC
- Do it your self (diy) material - this product is great for your home and workplace projects. Sands, drills, cuts with razor blade or scissors & very machineable.
- Possible applications - projects like spacers, heat shields, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
- Use ptfe sheet for making seals, washers and insulators. Ptfe is very useful & durable as a low-friction dry bearing surface material. Ptfe is both high impact and tearing resistant.
- Teflon material supplied by sterling seal & supply has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability.
- Ptfe is unaffected by most corrosive liquids, vapors and gases, and conforms to both fda and ams specifications.
Check StockDONLAB EBT2 1000ml Glass Separatory Funnel Set, PTFE Stopcock with Steel Support Stand, Clamp and PP Holder
- 1000ml glass separatory funnel with PTFE stopcork.
- Stamping steel stand: 8"x5” | 21cmx12cm.
- Rod height: 20" | 50cm, Road dia 3/8" | 10mm.
Check StockMastercool Refrigerant Recovery Tank 30LB / 50LB / 100LB - USAlab
- ● This platinum plate electrode is widely used in electrochemical study. It is an important accessary for electrochemical work-station and three-electrode cell. Besides, the platinum electrode is also used as insoluble anode in electrolysis process..
- ● The electrode is coated with PTFE (polytetrafluoroethylene), and the size of PTFE is 80mm × φ6.4mm. The terminal is gold-plated copper rod (15mm × φ2mm)..
Check StockEVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only
- Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
- Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
- The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
- EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
- Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check StockTeflon Sheet for Heat Press Transfer Sheet 18 Pack Non Stick 12'x16' Heat Transfer Paper Heat Resistant Craft Mat
- Quantity Size:18 pieces of 12''x16'' PTFE board. Weight:About 17 g.
- High Temperature Resistance:Heat press teflon sheet is made of high temperature and waterproof glass fiber,allows high temperature resistance up to 518℉degrees.
- Water Repellent:Our PTFE teflon sheets are easy to clean, wipe with wet cloth only, rather than repeat like washing clothes, but do not prevent oil, alcohol, acrylic paint, etc., will penetrate.
- Reusable and Non-stick:Our 18 packs teflon sheet for heat press reusable,non-stick treatment on surface,easy to use.
- Multi-purpose:The teflon sheet for heat press can be used as barbecue pad, non-stick oven inner gallbladder, ironing protector, hot pressing transfer printing, ironing board, very suitable for baking, barbecue, cooking, barbecue, baking, pressing, ironing, painting and other technical items.
Check Stock
100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters
- 【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
- 【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
- 【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
- 【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
- 【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..
Check StockSINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS
- 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
- 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
- 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
- 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
- SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock
Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
- 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
- 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
- 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
- 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
- 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock
WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided
- 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
- 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
- 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
- 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock
