Categories

Best Ptfe Valve Seals

Megairon 316 Stainless Steel 2" Full Port Ball Valve with Blue Vinyl Handle, NPT Female x Female Thread,1000 WOG(US Stock)

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

  • Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
  • Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
  • This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

DAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch

  • Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
  • Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
  • Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
  • Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
  • Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check Stock

Shift Rite Transmissions replacement for 4L80E 1994-1996 Updated Transmission Valvebody MT1 Shift Rite 4L80E

  • This TCC regulator apply valve kit with a hard-anodized aluminum valve with PTFE seal prevents valve bore related problems..
  • Sonnax offers a replacement TCC regulator apply valve kit 34994-01K that will prevent valve-bore related problems..
  • Hard-anodized aluminum valve incorporates a PTFE seal at the main wear area of the bore to prevent oil loss..
  • The valve spool land at the spring end has been lengthened to provide greater bore-to-valve surface contact, thus further preventing leakage..
  • The valve spool has annular grooves to help center the valve in the bore..
Check Stock

Stainless Steel SS316 NPT 2 Swing Check Valve WOG 200 PSI PN16 CF8M

  • Body Material:Stainless Steel 316,200PSI/PN16,ANSI B1.20.1.
  • Working Pressure 200 WOG,Port Types:Female x Female threaded.
  • Temperature range: -60 to 450 degree Fahrenheit,Suitable for full range of liquids and gas.
  • Check valves are used to help direct flow in one direction. The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols..
  • Swing check valves are for horizontal use only. When fluid pushes on the stopper in the correct direction, it will "swing" open to allow flow. If flow moves in the opposite direction, it will swing shut. The check valve cannot be used in vertical applications as gravity may affect the function of the swinging motion..
Check Stock

CASTNOO Brian Tooley Racing for LS Valve Seal Installation Tool 4.8 5.3 5.7 6.0 6.2 Springs

  • Application--LS Valve Stem Seal Kit For Stock Powdered Metal and Bronze Guides.
  • Function--Separate Spring Locator is Required, Valve Stem Seals Keep Unwanted Oil From Entering the Combustion Chamber.
  • Easy to install--Easily Install Valve Seals when changing your springs.The last thing you want to do is install valve seals using a socket and hammer.
  • This seal installtion tool allows you to slowly press the seal down without damaging the seal..
  • 100% Satisfaction Guarantee--If you're not 100% satisfied with this LS Valve Seal Installation Tool, simply return it for a full refund in 30 days.
Check Stock

F Edsrdus Food Grade Silicone Grease SG02A with PTFE O-Ring Lubricant Faucet Leak Proof Multi-Functional Dielectric Seal Out Moisture Oil Resistant 3OZ(85g) x1 Pack

  • ...tric, clean, protects against oxidation and seals out moisture. Prevent electrical connections wiring from salt, dirt and corrosion..
  • Silicone lubricant helps seat the O-ring properly, speeds up assembly operations and improves automated assembly. Lubricating, sealing and conditioning O-rings and other regulator and valve system components. It also protects O-rings from damage by abrasion, pinching or cutting. Using O-rings silicone grease can prolong the life of equipments service..
  • Widely Applications: It can work well in faucet, garden hoses, vacuum systems, O-rings, breathing apparatus, seals and food mixers, bathroom equipment, kitchen appliances. Lubricating brake parts, weather stripping, trunk seals, speedometer cables, window channels, hood strips & pads and rubber gaskets etc. Help reduce the overall leak rate in vacuum applications by filling the spaces of the glands surfaces and lowering permeation rates of the elastomer..
Check Stock

NICECNC 16PCS B series Valve Cover Washer Seals Bolt Nuts Kit B16 B18 VTEC Engines Compatible with Honda Civic Si 1999-2000 Prelude DOHC 1992-2001 Compatible with Acura Integra 1990-2001, Red

  • The billet aluminum valve cover washer seals and nut kit is CAD Designed and Made out of Aircraft Quality Precision Machined T6061 Billet Aluminum..
  • Anodized using a unique hard Anodizing Process for a Long Lasting Finish and Lifetime durability.These use the highest quality VITTON seals for the ultimate in oil containment and durability..
  • Add that last finishing touch to engine compartment with these all new billet valve cover washer and seals..
  • The billet valve cover seals and nuts are specifically designed and engineered to keep your valve cover in place and not leak..
  • Replaces the factory old valve cover washers seal and nuts, guaranteed to make your engine Look way better..
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

Sterling Seal SSI7530.SM2.6 PTFE Virgin Teflon Gasket Material Pack, 6\ x 6\ square, 2 thicknesses - 1/64\

  • DO IT YOUR SELF (DIY) MATERIAL - This product is great for your home and workplace projects. Sands, Drills, Cuts with razor or saw & Very Machine able.
  • POSSIBLE APPLICATIONS - Arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
  • Use PTFE Sheet for making seals, washers and insulators. PTFE is very useful & durable as a low-friction dry bearing surface and is great as a Drum bearing material for dryers.
  • Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
  • PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications. Contact with food, beverages, cosmetic and pharmaceutical products are suitable.
Check Stock

Sterling Seal SSI7530.SMMD2.6 PTFE Virgin Teflon Gasket Material Pack, 6\ x 6\ square, 2 thicknesses - 1/32\

  • DO IT YOUR SELF (DIY) MATERIAL - This product is great for your home and workplace projects. Sands, Drills, Cuts with razor or saw & Very Machine able.
  • POSSIBLE APPLICATIONS - Arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
  • Use PTFE Sheet for making seals, washers and insulators. PTFE is very useful & durable as a low-friction dry bearing surface and is great as a Drum bearing material for dryers.
  • Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
  • PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications. Contact with food, beverages, cosmetic and pharmaceutical products are suitable.
Check Stock

Mopar 4897298AA Transfer Case Seal

  • Manufactured to AFBMA standards using high quality materials.
  • Coast to Coast provides a broad range of oil and grease seals including single & double lipped.
  • Seals are manufactured with nitrile, , and PTFE materials.
  • The Precision seal offering includes applications for wheel end, engine, differential and transmission/transaxle.
  • Other applications include transfer case, power steering and agricultural.
Check Stock