Best Ptfe lined Sight Glass
10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters
- 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
- 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
- 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
- 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
- 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check StockSINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS
- 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
- 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
- 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
- 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
- SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check StockEVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only
- Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
- Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
- The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
- EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
- Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock
LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)
- This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
- PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
- Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
- This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
- 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock
TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings
- Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
- High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
- High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
- Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
- Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
Check Stock
New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015
- ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
- ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
- ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
- ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
- middle layer: 304 stainless steel wire mesh sleeve.
- outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
- ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock
SE Pack of 144 Clear Glass Vials (2-3/16\ x 9/16\ Dia.) - GB4
- 【High Quality】These 2ml sample vial are made of borosilicic acid glass, low content of free ions, low coefficient of expansion and very high chemical resistance. It is suitable for containing all injectable preparations with acid, neutral and alkaline pH. It also has good resistance to thermal shocks and can be sterilized before or after filling..
- 【Sealed Design】Autosampler Vials with unique screw design ensures the consistency of the seal.Includes silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples..
- 【Improve Work Efficiency】HPLC glass sample Vials with large writing patch for sample idification and white printed graduations in 0.5ml increments.The category and usage amount are clearly visible.Therefore, time is saved and work efficiency is improved..
- 【Wide Range of Applications】Our vials with caps are suitable for various automatic samplers for thin neck bottles, preferentially they are found on Agilent, HTA, Shimadzu, Thermo, Varian, Waters, etc.Widely used in standard HPLC and GC applications..
- 【Packing List】2ml Clear autosampler vial, 12mm Diameter, 32mm Height, 9-425 screw top.500 Pcs/Pack. If you have any qestion, please feel free to contact us, we will respond within 24 hours and....
Check StockDONLAB FLR-01 ASTM STD Glass 50ml SCHLENK Reaction Flask 24/40 Joint with PTFE Stopcock
- Vacuum degree: High Vacuum Valve Stopcork 003e Glass Stopcork 003e PTFE Stopcork.
- The man-blowing Borosilicate 3.3 glass is uniform and flawfree.
Check StockCadence 6021SS Stopcock, Female Luer to Male Luer Lock
- Glass Stopcock with PTFE Plug Glass PTFE Stopcocks allow the user to connect a valve inline to a system and allows the user to connect a flexible rubber hose to the stopcock..
- There are 2 sizes available with 8mm OD and 2mm bore sizes and 10mm OD and 4mm bore size. 30 days Limited Warranty (defects and craftmanship) ***Notice to Customers: All units are inspected for broken glass or parts before unit is shipped..
- 30 days Limited Warranty (defects and craftmanship) ***Notice to Customers: All units are inspected for broken glass or parts before unit is shipped..
Check StockFlow Ezy Filters, Inc. PASS50 1-1/2 30 All Stainless Steel Suction Strainer with Nylon Connector End, 50 GPM, 1-1/2\ Female NPT, 30 Mesh Size
- 2" In-Line, Cam and Groove Sight Glass Strainer Assembly.
- Includes an 8" x 2" Polycarbonate Sight Glass Tube.
- Includes a 2" Stainless Steel Funnel Strainer.
- Includes a 2" Aluminum Type A & D Cam and Groove Fitting.
- Stain and View Your Flow at the Same Time!.
Check Stock6ml High Density Polyethylene Vial, Push-On Caps, Bulk Packed, 2000 per Case
- Full height partitions minimize breakage.
- Measures 28mm outside diameter by 57mm height.
Check StockMAKER Homeware Round Steam Grill Pan
- Tempered glass lid locks in moisture, reducing cooking times by up to 35%.
- Sloped bottom allows excess oils to collect in the sides of the pan.
- Perfect for steaming and grilling, and double grill lines create beautiful grill marks.
- Environmentally friendly premium Ceramtec nonstick ceramic coating provides easy release and cleanup, and is PTFE, PFOA and Cadmium free.
- Dimensions: 13.46″L x 11.50″W x 4.25″H.
Check Stock
2mL Autosampler Vials with Caps, HPLC Vials, 9-425 Amber Glass Vial with Blue Screw Caps/Writing Patch/Graduation, White PTFE & Red Silicone-100 Pcs
- 【High Quality】These 2ml sample vial are made of borosilicic acid glass, low content of free ions, low coefficient of expansion and very high chemical resistance. It is suitable for containing all injectable preparations with acid, neutral and alkaline pH. It also has good resistance to thermal shocks and can be sterilized before or after filling..
- 【Sealed Design】Autosampler glass vials with unique screw design ensures the consistency of the seal.Includes silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples..
- 【Improve Work Efficiency】HPLC Sample Vials with large writing patch for sample idification and white printed graduations in 0.5ml increments.The category and usage amount are clearly visible.Therefore, time is saved and work efficiency is improved..
- 【Wide Range of Applications】Our vials with caps are suitable for various automatic samplers for thin neck bottles, preferentially they are found on Agilent, HTA, Shimadzu, Thermo, Varian, Waters, etc.Widely used in standard HPLC and GC applications..
- 【Packing List】2ml Clear autosampler vial, 12mm Diameter, 32mm Height, 9-425 screw top.500 Pcs/Pack. If you have any qestion, please feel free to contact us, we will respond within 24 hours and....
Check Stock
