Categories

Best Pto Control Valve

VEVOR Slip Clutch 1 3/8 PTO Slip Clutch Smooth Round Ends PTO Friction Clutch Carburized Steel Tractor Slip Clutch Adjustable Rotary Cutter Slip Clutch Black Brush Hog Slip Clutch for PTO Shaft

  • Quality Pto Slip Clutch: The tractor PTO slip clutch is made of advanced 20CrMnTi carburized steel, which has high durability and impacts resistance properties. The black-painted surface is smoothing and anti-weary. Thus, it can withstand higher torque and speed to gain better protection for your PTO shaft..
  • 1 3/8" Round Shaft Ends: Constructed in round smooth ends, this PTO shaft slip clutch has a size of 1 3/8" for both male and female ends. It fits the PTO slip shaft, matching perfectly with the same diameter of your implement input shaft and tractor output shaft, featuring superior safety functions as shear bolts..
  • Adjustable Torque Setting: With rated torque 900 nm, adjustment range: 20 - 55 hp, You can adjust the overall length of the tension springs to set an appropriate torque for your rotary cutter slip clutch. Just tight/loose the eight nuts by 1/4 of a turn and check its tightness for correct operation..
  • Replaceable Friction Disc: The PTO friction clutch adopts an essential spring and disc set up, assembled with fiction discs inside to help transmit forces, allowing two sides of the PTO shaft to spin at different speeds..
  • Wide Range Application: Adding a slip clutch for PTO is meant for protection. It works as an extra safety line with PTO dri....
Check Stock

NAKAO 946-04173E Deck Engagement Cable Replacement for MTD Troy-Bilt 946-04173E 746-04173 946-04173 746-04173A 746-04173B 746-04173C 946-04173A 946-04173B Lawn Mower

  • ...s:Parts Shop Deck Engagement Cable, 946-04173E Deck Engagement Cable.
  • ◆Replace for MTD Troy Bilt 946-04173E 946-04173 946-04173A 946-04173B 946-04173C 946-04173D 946-04173E 746-04173 746-04173B 746-04173A 746-04173C.Also applies fit for drive engagement cable,bolens riding lawn mower parts,bolens lawn mower spring,pto cable,troy bilt self propelled cable,deck engagement,troy bilt lawn mower cable,troybilt deck,troy bilt throttle cable for lawn mower,lawn tractor blade engagement cable,troy bilt pro cable,cub cadet blade engagement cable,troy bilt auger blades.
  • ◆Conduit Length 39", Inner Wire Length 56",Z bend on one end and a spring on the other.Also applies fit for 946-04173e,deck engagement cable 94604173e,pto cable for troy bilt pony,deck engagement cable troy bilt,pto cable troy bilt pony,troy bilt pony pto cable,troy bilt engagement cable,troy bilt blade engagement cable,deck engagement cable,troy bilt deck cable,craftsman deck engagement cable,946-04173c deck engagement cable,engagement cable 946 04173e,troy bilt bronco pto cable.
  • ◆Package include 2 cable. Also applies fit for poulan pro pto cable,craftsman riding mower blade engagement cable,mower deck engagement cable,lawn mower shut off cable,craftsman engagement cable,troy built deck cab....
Check Stock

Kevlar PTO Mower Belt 1/2'x60' for MTD Cub Cadet 754-0497 954-0497 754-3038 954-3038, for MTD 42' Deck 13AA604F401 13AD608G300 13AD618G705 13AD618G726 13AF618G705 13AF618G726

  • ◆◆ PTO Belt Top Width[in]:1/2" Outside Length[in]:60".
  • Made with Kevlar to Meet or Exceed FSP Specifications.
  • Belt Application: PTO Belt(Please Check the Product Description).
  • ◆◆ PTO Belt Fits Models: MTD 13AA604F401, 13AD608G300, 13AD618G705, 13AD618G726, 13AF618G705 and 13AF618G726.
  • ◆◆ PTO Belt Fits Models: Cub Cadet 1000 series with 38" deck.
  • ◆◆ PTO Belt Replaces OEM : Cub Cadet 754-0497, 954-0497,MTD 754-0497, 954-0497.
  • ◆◆ PTO Belt Replaces OEM : Cub Cadet 754-3038, 954-3038.
Check Stock

VEVOR PTO Shaft 1-3/8 PTO Drive Shaft 6 Spline Both Ends PTO Driveline Shaft Series 5 Tractor PTO Shaft 43 -57 Brush Hog PTO Shaft Black PTO Shaft w/Slip Clutch for Bush Hog/Finish Mower

  • Sturdy and Durable: This PTO shaft is a well-forged series5 driveline shaft with CE certification. It consists of a slip clutch, a solid 20CrMnTi....
  • 6 Spline Ends: Tractor end: 1-3/8" x 6 Spline.
  • implement end: 1-3/8" x 6 Spline. Our brush hog PTO shaft matches perfectly with the same size and type....
  • Adjustable Length: Compressed Length: 43".
  • Extended Overall Length: 57". The tiller PTO shaft is designed with a telescoping steel tube, a universal....
  • Easy Assembly ＆ Safer Use: As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for direct replacement. The....
  • Wide Application: The PTO (Power Take-Off) shaft transfers the power from the tractor to the PTO powered attachment. It is widely used on mowers,....
Check Stock

Farmer Helper 48" Standard Multi-Duty Flail Mower Cat.I 3pt 20+HP Rating (FH-EFG125) Requires a Tractor. Not a standalone Unit.

  • Comes with hammer Blades with precise blade overlap.
  • Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO.
  • Adjustable finished cutting height (both Rear Roller & Skids).
Check Stock

Farmer Helper 55" Ditch Bank Flail Mower Cat.II 3pt 35~75hp PTO(FH-AGF140) w/Hammer Blades Requires a Tractor. Not a standalone Unit.

  • Multiple Drive Belts Assure Power to the Blades.
  • Standard 3-Pt Category II Hitch Mount Only.
  • Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO.
Check Stock

Farmer-Helper 65" 3pt Ditch Bank Flail Mower Cat.I 35hp~65hp (FH-AGL165) w/Hammer Blades Requires a Tractor. Not a standalone Unit.

  • Multiple Drive Belts Assure Power to the Blades.
  • Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO.
Check Stock

Farmer-Helper 63" Ditch Bank Flail Mower Cat.II 3pt 40hp~80hp PTO (FH-AGF160) w/Hammer Blades Requires a Tractor. Not a standalone Unit.

  • Standard 3-Pt Category II Hitch Mount Only.
  • Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO.
  • Mowing Deck will extended to right of your lower right lift arm..
Check Stock

TUPARTS Electric PTO Clutch Lawn Mower Clutch - Replace for 532179335 Fit for Husqvarna 179335 414737 532179335 for Craftsman GTH2548 2648 2654 2752 264 for Xtreme X0169

  • ...GTH 24V52LS, GTH 263T, GTH 264T, GTH 27V48LS, GTH 3052TF, LGT2554, LGT 3554, LGT 2654, LGT 24K54, YTH 2454, GTH 3052TDF, YTH220, Z448, Z454, Z454X.
  • for Jonsered Models: LT2223 A2, LT2227 A2, LT2323 A2, 2754GTHI, GT52F, LGT54, Z52XF.
  • for Poulan Pro Models: PB23H48LGT, PBGT26H54, PBLGT26H54, PP22V48, PPLGT2248.
  • SIMPLE CONTROL SET UP - Since the clutch is running directly, all that is needed is a switch. This allows the clutch to be placed into tight locations since wires can be easily routed to a simple switch on the control panel versus linkages that would be required with mechanical units..
  • SOLID FORGED ROTOR - A one-piece solid forged rotor means no chance of internal parts separation. Our rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque..
  • HIGH TEMPERATURE EPOXY COIL - In order to help prevent failure from both vibration and outside contaminants, all coils of our PTO clutch are sealed in the coil shell with a high temperature epoxy coating..
  • HEAVY DUTY FIELD PLATE - To resist deflection or breakage due to vibration, a thick backing plate is used. Projection welding enhances the connection to the coil shell. Please check the part number before purchasing..
Check Stock

MAG 1 00525 Universal Tractor Hydraulic Fluid - 5 Gallon

  • Package dimensions: ????10.91 inch L x 8.07 inch W x 4.57 inch H.
  • Unique friction characteristics on wet clutches enables smoother start off, drive control, and PTO connection.
  • Fully interchangeable with standard UDT and Super UDT fluids.
  • Improved transmission efficiency through reduction in power loss.
Check Stock

TUPARTS Electric PTO Clutch Lawn Mower Clutch - Replace for 53462700 Fit for Ogura GT1A-EH01 53462700 for Ferris 5100417 for Dixie Chopper 500144

  • ... GTH 2752TF, GTH 24K54, GTH 3052TF, LGT2554, LGT 3554, LGT 2654, LGT 24K54, LGTH22V48, LGTH 2454, YTH 2454, GTH 3052TDF, YTH220, Z448, Z454, Z454X.
  • for Jonsered Models: LT2223 A2, LT2227 A2, LT2323 A2, 2754GTHI, GT52F, LGT54, Z52XF.
  • for Poulan Pro Models: PB23H48LGT, PBGT26H54, PBLGT26H54, PP22V48, PPLGT2248.
  • SIMPLE CONTROL SET UP - Since the clutch is running directly, all that is needed is a switch. This allows the clutch to be placed into tight locations since wires can be easily routed to a simple switch on the control panel versus linkages that would be required with mechanical units..
  • SOLID FORGED ROTOR - A one-piece solid forged rotor means no chance of internal parts separation. Our rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque..
  • HIGH TEMPERATURE EPOXY COIL - In order to help prevent failure from both vibration and outside contaminants, all coils of our PTO clutch are sealed in the coil shell with a high temperature epoxy coating..
  • HEAVY DUTY FIELD PLATE - To resist deflection or breakage due to vibration, a thick backing plate is used. Projection welding enhances the connection to the coil shell. Please check the part number before purchasing..
Check Stock

Victory Tractor Implements BX510H Wood Chipper with Hydraulic Infeed

  • 5″ x 10″ Infeed Opening, 26″ x 34″ Chute Opening.
  • PTO shaft included in purchase, 18HP minimum PTO HP needed,.
  • 4 reversible carbon steel knives plus 1 counter knife.
  • 3 Point Hitch for CAT I/II (Quick hitch compatiable to CAT I).
Check Stock

Hydraulic Valve 2 Spool, Hydraulic Directional Control Valve, 11GPM Hydraulic Joystick Control Valve for Tractors Loaders, Double Acting Cylinder Spool

  • Hydraulic directional control valve comes with 2 spool and #8 BSPP in/out ports, and the 2 spool hydraulic joystick fits for small tractors, tractors loaders, log splitters, and so on..
  • Hydraulic control valve 2 spool for operating double acting cylinders. Durable cast iron construction provides long-term usage..
  • The hydraulic valve 2 spool, hydraulic control valve for tractor loader, all spools standard come with spring return, which can return to the neutral position..
  • The hydraulic spool control valve's relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM. The hydraulic valve 2 spool replacement for hydraulic control valve 2 spool, hydraulic directional control valve, hydraulic spool control valve, joystick hydraulic valve, 2 spool hydraulic joystick, hydraulic control valve for tractor loader, hydraulic joystick control, hydraulic loader valve joystick, hydraulic loader control valve joystick..
  • You will get 1pcs 2 spool hydraulic control valve. We provide the best after-sales service, if you have any questions, please feel free to contact us, we are happy to serve you..
Check Stock