Categories

Best Pull Lever Keg Tap

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit

  • ... that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
Check Stock

Kegco MPK199B-G Guinness Dispensing Kegerator with Black Cabinet and Door

  • INCLUDES COMPLETE GUINNESS KEG TAPPING KIT: This Kegerator is equipped with a complete direct draw kit for U system domestic kegs, which includes brands like Harp and Kilkenny in addition to Guinness. The kit includes a brand new 15 cu. ft. aluminum Nitrogen tank, a double gauge Nitrogen regulator, a U system lever handle keg coupler, and a 3" diameter polished stainless steel draft tower with a chrome plated stout beer faucet..
  • CHROME PLATED STOUT BEER FAUCET: To allow you to properly pour a glass of Guinness with that famous and unique head, we've included a specialty European Stout Beer Faucet with the dispense kit. This faucet operates by pulling forward and down on the tap handle. A restricted spout with a tiny restrictor disc helps slow down the pour and allows the beer to pour properly, and the disc can be removed if you need to pour a regular beer from the faucet..
  • "U" SYSTEM LEVER HANDLE KEG COUPLER: This kit comes with a commercial grade lever handle keg coupler that is compatible with all U system kegs, including Guinness, Harp, and Kilkenny kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is squeeze the handles together and then push down on the lever handle to properly ....
Check Stock

Kegco KTS97D-W D System Ergonomic Keg Coupler with Lever Handle and Stainless Steel Probe

  • This Kegco keg coupler is compatible with all American D System Sankey kegs, allowing you to easily enjoy your favorite domestic beer brands straight from the keg.
  • Clickable lever handle clicks up and down to engage the keg, making it more convenient than conventional lever style keg couplers that need to be pulled out before being pushed down.
  • The keg probe is made of high-quality stainless steel that is resistant to chemicals, making it more sanitary than chrome plated brass keg couplers.
  • Kegco’s commercial-grade keg tap is constructed of durable 304 grade stainless steel that can stand up to use in demanding commercial environments like pubs, bars, and restaurants.
  • The keg coupler body features a 55-psi pressure release valve that allows you to easily let the pressure out of the keg.
Check Stock

Non-Slip Rubber Padded Stainless Steel Drip Tray with Tower Cutout by Proper Pour

  • Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and....
  • Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers.
  • NSF approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe.
  • This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs.
  • Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg.
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank

  • ... that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer fauc....
Check Stock

FERRODAY 8 Keg Pump D-System Keg Pump Complete US Beer Keg Pump for Sankey Keg Party Pump Heavy Duty Picnic Keg Tap Keg Hand Pump Draft Beer Kegerator Pump Easy Lock Water Keg Pump Soda Pump

  • 【Built to Last Pump & Faucet】: American complete pump tap system 8” D system coupler for Sankey keg. High-quality material, classic modeling,....
  • 【No Leaks From Connections】: Lever handle lock coupler with internal gasket provides air tight seal and no leaks.
  • 【Easy to Tap & Easy to Pump】: Highly reliable 8” cylinder picnic party pump with ergonomic ball end. It's easy to operate with a simple stroke....
  • 【Widely Used D System Keg Pump】: 8" American keg party pump D system coupler for Sankey kegs. Works with most North American beer kegs. Perfect....
  • 【Easy to Setup & Life Time Service】: Connects the pump directly to your keg, lock down the lever handle, squeeze the faucet trigger and enjoy your....
Check Stock

BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank

  • ...bber covers for protective purposes. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI..
  • 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve.
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-pla....
Check Stock

Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)

  • ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass.
  • ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
  • ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock.
  • ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi.
Check Stock

Keg Coupler, MRbrew Beer Coupler, Keg Coupler D System, Sankey Keg Coupler, All 304 Stainless Steel Keg Tap Coupler, For American Standard 5/16'' I.D Size Liquid & Gas Hose

  • ...ring to avoid relief valve leakage. The d coupler meeting all kinds of pressure that needs you, this is definitely the best gift for lovers of home brewing..
  • STAINLESS STEEL ERGONOMIC HANDLE: The MRbrew keg coupler has an easy to use ergonomic handle. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. Anyone who has pulled the handle off of a keg coupler can appreciate the convenience!.
  • 100% LIFELONG IUUSES SOLVING FOR YOU: Each MRbrew stainless steel D coupler is backed by unbeatable, reliable, trusted product quality and customer service, please feel free to contact us if you are not satisfied, we will unconditionally solve for you!.
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ...ve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets..
Check Stock

HomeCraft Black Stainless Steel Full-Size Kegerator Draft Beer Dispenser & Beer Cooler, Spring-Loaded Tap Dispenser, Holds 1/6, 1/4, 1/2 Barrels, 2.5-Pound CO2 Tank, Single Meter Regulator

  • SPRING-LOADED TAP: The 12-inch, black spring-loaded single tap tower allows for an easy pull and release dispense, pouring a consistent draft beer every time.
  • KEG COUPLER: Includes one American Sankey "D" single tap system that stands up to heavy use and is specially designed with a lever handle that makes it more sturdy and reliable than other standard styled keg couplers.
  • SINGLE-METER REGULATOR: Durable constructed regulator features a shut-off and pressure relief valve, along with an easy-to-read pressure gauge that measures the PSI outflow from CO2 tank to keg (0-60 PSI).
  • 2.5-POUND C02 TANK: Kegerator comes with a 2.5 lb. CO2 tank (unfilled), which fits in the CO2 tank holder in the back exterior to help maximize refrigeration space.
  • ENERGY STAR EFFICIENT: Trusted and backed by the DOE by being energy-efficient to help save costs - estimated at $32 yearly.
Check Stock

Silginnes Chalkboard Beer Tap Handles - 4-Pack Wooden Walnut Beer Tap Handles With Chalkboard And Pen - Best For Homebrew, Kegerators And Bars - Makes A Great Gift For Beer Lovers And Homebrewers

  • ...dles are a perfect gift for beer lovers, homebrewers, or restaurant owners. Tip: Write a funny message to the chalkboard of the beer tapper handles to cheer up the gift receiver - we promise that it will be appreciated!.
  • PREMIUM QUALITY & STURDY WALNUT WOOD - Durable protected walnut wood is a great material for keg pull handles as it lasts for years of heavy use. Write smoothly and erase cleanly to the chalkboard surface with the pen. If you want to use different colors than white, you can also use any other chalk pen..
Check Stock