Categories

Best Pull Stud

Stud Finder Wall Scanner, Wall Stud Finder with 27 Pounds of Pull Magnetic Power, No Batteries Required Stud Finder to Detect & Locate Metal Through Drywall, Wood, Plywood Paneling, Ceramic Tiling

  • ➤ PRECISE LOCATION - Our magnetic stud finder has the rare earth magnet with 27 pounds of pull to find studs quickly and accurately. No batteries required and the magnet is strong enough that you don't need a pencil to mark the location of studs with it..
  • ➤ EFFICIENT STUD FINDER - The stud finder magnet will easily detect metal through 1/2″ or 5/8″ drywall, wood frame walls, and unlike other types of stud finders, our stud finder wall scanner can also through up to 3/4″ceramic tiling and plywood paneling. This wall stud finder can easily detect metal in less than a minute..
  • ➤ COMPACT SIZE & PORTABLE - With a portable size of 3.23*0.87 inches, the wall stud finder easily fits into your pocket or tool bag. The stud finder wall scanner has a hanging hole design so you can string it up and carry around..
  • ➤ NO WORRY FOR SAFETY HAZARDS - The magnetic stud finder can be positioned and fixed in the exact location directly to help you can avoid danger when mounting TV, cabinets, garage shelves, etc. It will be a great birthday gift and Christmas gift to your husband and your father..
  • ➤ WIDE APPLICATIONS - It can be used not only as a stud finder, but also to find some small metal objects dropped on the ground, or pull up metal objects dropped....
Check Stock

Lisle 28950 Truck Wheel Stud Installer

  • Fits truck wheel studs up to 22 millimeter (7/8") in diameter.
  • Use the lug nut to tighten against the tool body to pull the stud in position.
  • The tool body is equipped with a thrust bearing to easily pull the new wheel stud into place.
Check Stock

Mophorn Dent Puller Stud Welder Dent Repair Kit 110V Stud Welder Kit 800 VA Spot Welder 1000 Nails for Car Body Panel

  • ...can hold the pin firmly without sliding, and its handle is made of vinyl, which is non-slip and can be held firmly. Also, the weight of the cast iron slide contributes to comfortable grip..
  • One-handed Operation: Adopts touch switch design, just press the trigger, then you can successfully weld the nails. Change to a pull hammer, hang the hammer on the nail, and you'll be able to pull the metal of the vehicle back to its normal state. And this stud gun dent puller kit has complete accessories, which can solve all the common dent problems of vehicles. It is small and can be used flexibly in any position..
  • Wide Application: No matter what type of vehicle it is, cars, trucks, vans, our stud gun dent puller kit can target car collision damage. Such as repair metal elastic deformation, plastic deformation, direct damage, and partial indirect damage. It is also suitable for other metal deformation repairs..
Check Stock

Youliang 10PCS Bleed Fitting Rubber Cap for Bike Hydraulic Disc Brake, Black

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 5 Pieces = 1Pcs 12inch Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), 4 Pcs Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..
Check Stock

Mophorn Stud Welder Kit 1600A Stud Welder Dent Repair Kit 800VA Spot Welder Stud 110V Welder Stud Kit Stud Gun Dent Puller Kit with Complete Accessories Dent Welder Repair for Auto Body Repairing

  • ... hold the pin firmly without sliding, and its handle is made of vinyl, which is non-slip and can be held firmly. Also, the weight of cast iron slide contributes to comfortable grip..
  • One-handed Simple Operation: Adopts touch switch design, just press the trigger, then you can successfully weld the nails. Change to a pull hammer, hang the hammer on the nail, and you'll be able to pull the metal of the vehicle back to its normal state..
  • Useful Accessories Included: This stud gun dent puller kit has complete accessories, which can solve all the common dent problems of vehicles. It is small in size and can be used flexibly in any position. The tool box makes the welding accessories neat and portable..
Check Stock

US Cargo Control Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..
Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 8 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 8 Pieces = QTY 4: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..
Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..
Check Stock

LECIEL Reusable Ear Piercing Gun Kit, Professional Body Nose Lip Earrings Piercing Kit with 16 Pairs Stud Earrings (6 Pairs Sterling Silver Stud Earrings+10 Pairs Gun Stud Earrings)

  • 【Professional Piercing Kit】: This reusable piercing gun made of high quality stainless steel and plastic material. You can reuse it as much as you want..
  • 【2 Kinds of Stud Earrings】: It comes with 6 pairs 925 sterling silver cubic zirconia stud earrings set for wearing and 10 pairs gun stud earrings for piercing.The sterling silver stud will help you to minimize the chances of an infection..
  • 【6 Pairs Sterling Silver Stud Earrings】:The 6 pairs come with 6 different sizes, including 3mm, 4mm, 5mm, 6mm, 7mm and 8mm, you can choose different size according to your needs, beautifully and delicately designed, suitable for various occasions.
  • 【Easy to Use】: you can make holes on your ears easily with this ear piercing gun. you just need to locate the place where you want for the hole. And then insert the gun stud to the adaptor. Last, pull the trigger. Done perfectly..
  • 【Nice helper】: You can use it for professional piercing or personal piercing at home, you will get a painless piercing process even at home without going to the salon, saving your time and money..
Check Stock

Ear Piercing Gun Kit, 233PCS Self Piercing Earrings Set, Nose Navel Lip Ears Piercer Body Piercing Tools, Earring Piercer with Hypoallergenicear Piercing Needle Kit for Salon & Home

  • ...t for the handle, These self ear piercing guns are made of stainless steel, easily sterilized and not easy to cause infection, fits most people. The handle is crafted with superior plastic, sturdy & durable, odorless and non-poisonous, safe to use..
  • 【Easy to Use】1. Pull back the Tension Regulator. 2. Place a piercing stud in the Adapter hole. 3. Pull the Trigger, the aiming slot is used as a guide for aim, please make sure the point of the stud is straight going to the aiming slot. 4. Press FIRE, forcing the stud through the flesh..
  • 【Painless Ear Piercing & Wide Application】This cartilage piercing kit can be widely used for beginner and professional users. Also, the body piercing gun is suitable for professional use or home use. If used correctly, it is painless..
Check Stock

A-minusone 84PCS Body Septum Piercing Kit 14G 16G Tools for Nose Tongue Lip Ear Eyebrow Belly Button Cartilage Tragus Industrial Barbell Helix Daith Piercing Jewelry Piercing Needles Clamps

  • 【Professional Piercing Kit】: This reusable piercing gun made of high quality stainless steel and plastic material. You can reuse it as much as you want..
  • 【2 Kinds of Stud Earrings】: It comes with 6 pairs 925 sterling silver cubic zirconia stud earrings set for wearing and 10 pairs gun stud earrings for piercing.The sterling silver stud will help you to minimize the chances of an infection..
  • 【6 Pairs Sterling Silver Stud Earrings】:The 6 pairs come with 6 different sizes, including 3mm, 4mm, 5mm, 6mm, 7mm and 8mm, you can choose different size according to your needs, beautifully and delicately designed, suitable for various occasions.
  • 【Easy to Use】: you can make holes on your ears easily with this ear piercing gun. you just need to locate the place where you want for the hole. And then insert the gun stud to the adaptor. Last, pull the trigger. Done perfectly..
  • 【Nice helper】: You can use it for professional piercing or personal piercing at home, you will get a painless piercing process even at home without going to the salon, saving your time and money..
Check Stock

Reusable Ear Piercing Kit, Professional Salon Peircings Gun Tools With Silver Earrings Set For Home Self Body Nose Lip Earrings Piercing Kit with 18 Pairs Stud Earrings (Black)

  • ...ent size according to your needs, (recommended used after 4 weeks)..
  • 【Easy to Use】: you can make holes on your ears easily with this ear piercing gun. you just need to locate the place where you want for the hole. And then insert the gun stud to the adaptor. Last, pull the trigger. Done perfectly..
  • 【Nice helper】:Suitable for individuals and shops engaged in professional piercing work,You can use it for professional piercing or personal piercing at home, you will get a painless piercing process without going to the salon, saving your time and money..
Check Stock

Professional Ear Piercing Gun Kit with 6 Pairs S925 Sterling Silver Earrings (18K Yellow Gold Plated)+10 Pairs 316L Surgical Stainless Steel Gun Stud Earrings for Body Nose Lip Salon Home Use

  • 【Painless And Quick Operating】:It is painless to make ear holes with this professional piercing gun. It is very easy to use. You just need to insert the gun stud to the adaptor and align the gun with the position of punch mark. Then pull the trigger to finish it..
  • 【Wide Application】: Our cartilage piercing gun kit can be widely used for beginners and professional users. You can use it for ears, belly button,nose and lips etc. You can enjoy a painless and safe ear piercing process even at home, no need to go to the salon.
Check Stock