40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines
- The ROP Shop replacement 40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines.
- Specs - 7 1/2" Diameter. 3/4" Bore. 3/16" Key. Engagement Range: 1600- 3300 RPM. Refer to images 2 & 3 for more information.
- Includes - (1) Backplate, (1) Integrated Jackshaft, (1) 10T Sprocket, (1) 1" Driver Clutch Pulley, (1) 3/4" Driven Clutch Pulley, (1) Drive Belt, (1)....
- Fits 8HP-18HP Go Kart engines with 1" Straight Crankshaft & 1/4" Keyway, if this converter kit is used on engines larger than 18hp, the belt will burn....
- For some units, the driven clutch will need flipped around when mounted, please refer to image 7 for reference.
Check StockFour Seasons 36895 Reversible Fan Kit
- Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan.
- Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles.
- BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan.
- BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMWs and Fords.
- Universal fan belt adjustment wrench services Mercedes-Benz Nissan Quest and Mercury Villager radiator fans and pulley belts.
Check Stock
Mophorn Torque Converter CVT 2HP-7HP 3/4' Go Kart Clutch 212CC 30 Series Mini Bike 10T #40 41 Chain and 12T #35 Replacement Set TAV2 30-75 218353A Manco CVT Clutch Small Engine Drive Belt
- Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life..
- Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter..
- Quality Drive Clutch: We have a 3/4” Driver Pulley and a 5/8” bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems..
- Vehicle Fitment: The torque converter is compatible with 3/4″ & 5/8″ straight crankshaft. You can usually use it on 4-8 hp go-karts and motorbikes..
- Full Accessories: Our torque converter clutch has full accessories: 1 x 3/4″ driver pulley. 1 x 5/8″ bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware..
Check Stock
Motovecor Go Kart Torque Converter for Predator 212 Clutch Set, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, 3/4' 218353A, (0.75' 10T 40/41)-Upgrade
- Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
- Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75.
- Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75.
- Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end..
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches.
Check StockBETOOLL 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit Compatible with BMW E34 E39 E36 E46 E90
- Only applicable to the following engine models in the BMW models described in the title: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32..
- In order to disassemble the water pump on models with temperature-dependent viscosity-driven fans. Note: This 32mm fan clutch nut wrench is only compatible with BMW engines..
- The fan clutch wrench removed the lock nut on the hot-tack fan..
- The fan clutch bracket allows the technician to fix the water pump pulley in place while loosening the radiator fan..
Check Stock
Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
- POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
- COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
- the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
- each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
- the two forcing screws also work with most VW vehicles’ power steering systems.
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock
Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
- POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
- COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
- the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
- each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
- the two forcing screws also work with most VW vehicles’ power steering systems.
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check StockGo Kart Cart Torque Converter Kit 40 Series Clutch Pulley Driver Driven 8-18 HP
- 40 Series Clutch Pulley Driver Driven 8-18 HP.
- Fits all 8HP - 18HP engines with a 1" straight crankshaft with 1/4" keyway.
- Includes: Driver Clutch, Driven Clutch, Belt, Jackshaft.
- Includes: All mounting hardware attached to an easy to mount backing plate.
Check StockAlveyTech 5/8' Shaft Series 30 Torque Converter Driven Clutch for Coleman KT196 & CK196 196cc 6.5 Hp Go-Karts
- This Comet TAV2 Series 30 style driven or secondary clutch pulley works in conjunction with a 3/4" shaft driver clutch and an asymmetrical drive belt..
- Our 5/8" shaft Series 30 torque converter driven clutch for the Coleman KT196 and CK196 196cc 6.5 Hp go-kart is a high-quality aftermarket component of the go-kart's drive system..
Check Stock
HOTYELL Chainsaw Carving Mill Attachment, Power Gouge for Husqvarna and STIHL, Efficient Log Notcher for Timber Processing, Work Gloves Included (12 Blades)
- ★ The ZUIWAN chainsaw accessories are widely used,this bark peeler fit for Husqvarna 137-240 and STIHL MS170-250, which can turn your chainsaw into a multi-functional power gouge (mill) and save you a lot of time, the bark scraper tool is very suitable for furniture factory, sawmills, logging factory,home cabin.
- ★ The chainsaw sawmill kit due to 3:2 pulley reduction ratio and hardened steel driving pulley, this power gouge is better balanced,less weight and compact size,durable for long-term use.
- ★ The chainsaw carving mill attachment adopts excellent design, basically a belt driven, chain saw powered high speed gouge. Four cutters arranged on a wheel at the end of the attachment..
- ★ Nozzle of the chainsaw carving can be used for making wooden sculptures,for cutting assembly grooves and cups in the manufacture and assembly of log cabins..
- ★ Package includes: Slotting machine× 1 Drive pulley× 2 Belt× 1 Installation manual Installation tools.
Check StockKENDA Juggernaut Tire 26 x4.00 Wire Clincher DTC 60TPI Black
- 【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular....
- 【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or....
- 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75").....
- 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission,....
- 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
Check Stock212CC Torque Converter 6.5 HP 3/4 Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series
- 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
- 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
- 1 x 10 Tooth Sprocket for #40/41/420 Chain.
- 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
- 1 x Full Mounting Hardware. Note This is not made by Comet.
Check StockDrive Belt For Coleman Powersports KT196 Go Kart Buggy 4 Wheelers 196cc 6.5HP
- Our replacement torque converter asymmetric belt for the Coleman KT196 go-kart replaces the belt numbers 203589, 203589A, 203589 A/DF, and 5959 used on Comet style torque converters. Fits many converter 30 series Torq-a-verter drive systems..
- Used On Most Manco, American Sportworks and Ken-bar Karts with 5Hp-7Hp engines. Also used on the Comet Tav2 bolt on Torque-a-verter kit..
- Compatible with torque converters with a 6" distance between the driven pulley and the driver clutch. This distance is measured from the center of each pulley. Not compatible with units with a distance of 7" center to center distance. The belt is asymmetric with a 3/4" wide top face, 18 degree angle on one side, 2.5 degree angle on the other side..
Check Stock
