Categories

Best Pulleys For Engine Hoists

SPECSTAR 1100 Lbs Engine Support Bar Transverse Hoist for Motor Transmission with 2 Points Lift Holder and Dual Hooks

  • STURDY & DURABLE - The SPECSTAR engine support bar is made of high-quality steel with a protective powder-coated finish, which is in high rigidity and wear-resistant.
  • The heavy duty materials are reliable that can decrease the loss and ensure safe operation and prolonged usage.
  • STRONG LOAD CAPACITY - This transverse bar can carry up to 1100 lbs. that is suitable for lifting up and down of almost all types of car engines including sports cars, SUVs, sedans, and so on.
  • It can precisely locate and support the engine, making repair and clean become easier.
  • ACCURATE FINE-TUNING HEIGHT - The lifting height of 2 rotating hoists on the engine holder bar can be adjusted from 0 to 7.9 inches, and it is available to maintain altitude for a long time.
  • Equipped with a knob and stable triangular base on each side, the range between the 2 bases can also be changed from 21 to 59.1 inches, so it applies to vehicles that width is less than 59.1 inch.
  • PREMIUM FEATURES - The overall dimension of this solid engine brace is 59.1” (L) x 8.7” (W) x 7.9” (H).
  • It comes with double strong iron chains that ensure the safe landing of the motor, which is handy for doing engine mounting.
  • The non-slip thickened rubber feet on the bottom of the triangular base can effectively red....
Check Stock

ACDelco Gold 6K960 Standard V-Ribbed Serpentine Belt

  • ...s Dayco 89098 Accessory Drive Belt Idler Pulley replaces Duralast 231098, Gates 38043, ACDelco 38043, CARQUEST 38043, NAPA 38043, Dorman 419-610, Four Seasons 45019, Freshstart 49025, Goodyear.
  • REDUCE VIBRATIONS: If you are looking for a quality replacement for your worn serpentine or V-belt idler and tensioner pulleys, turn to Dayco. Constructed from spun steel or wear-resistant plastic with specially formulated glass-filled polymers, these pulleys feature smoother surfaces and tighter dimensional tolerances to reduce vibration and therefore prolong belt life. Lubricated bearings and high temperature seals assure peak performance, the most critical element of a pulleys service life.
  • EXTEND SERVICE LIFE: Developed and designed using state-of-the-art three dimensional computer aided design (CAD) and finite element analysis (FEA) to ensure the optimal design and maximum structural integrity. Built to last, the Idler Pulley has superior resistance to dirt, salt, chemicals, and other under-the-hood contaminants.
  • RELY ON QUALITY AUTO PARTS: Dayco's essential engine parts and drive system solutions offer engine economy, efficiency, and exceptional performance while minimizing noise, vibration, and harshness. They strive to be first-to-market with built-t....
Check Stock

JEGS Heavy Duty Engine Stand - Two-Piece Engine Cradle Design - Fits Small and Big Block Engines - Bolts Directly to Engine Block - Steel, Black Powder Coat Finish - Motor Stand - 1 Pair

  • Two-piece design with each piece bolting to each side of the engine, unlike other traditional engine hoists & stands..
  • Solid welded steel construction, black powder coat finish for great looks and long life..
  • Fits small and big block engines such as 283, 307, 327, 350, 400, 427, 454, and V8..
  • Our engine stand uses four heavy-duty ball bearing casters for rolling the engine around the floor with ease..
  • Includes 2 engine mounting brackets, 4 caster wheels, and hardware to install the engine test stand..
Check Stock

Serpentine Pulley System for Small Block Ford 302 - Alternator & Power Steering Applications

  • Polished Billet Aluminum Pulleys & Brackets CNC machined in the USA and backed by CVF Racing's Industry Leading Lifetime Warranty!.
  • 8 Rib Serpentine Pulleys for Increased Grip and Performance.
  • Includes All Pulleys, Brackets and Hardware for a Complete Installation.
  • Requires Saginaw Power Steering Pump with Keyway Shaft, drivers side lower radiator hose, and 4 bolt factory balancer.
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

VIVOHOME Heavy Duty Steel 2 Ton / 4000lbs Engine Hoist Load Leveler Shop Crane Cherry Picker with 2 Chains

  • MECHANIC'S BEST FRIEND - The VIVOHOME Heavy-Duty Hoist Load Leveler allows for easy engine handling and positioning.
  • It attaches between the engine block and the crane to let you lift the engine safely and easily.
  • With this handy tool, reinsertion of motor and transmission will also be perfectly balanced.
  • HEAVY-DUTY MATERIALS - Made with high-quality steel that is highly resistant to wear and corrosion, it ensures safe operation and prolonged service life.
  • The maximum lifting capacity of 4000 lbs. provides you with enough power to lift a variety of engines or other heavy items.
  • EXCELLENT SUPPORT CHAINS - Designed to easily attach to the engine, 2 supporting chains offer added strength and allow for accommodating engines of different sizes.
  • They help share the heavy load and keep the engine steady so that it won’t sway or fall off during the process.
  • CONVENIENT CRANK HANDLE - It comes with a fine-tuning crank handle that can be operated by one hand to adjust the horizontal tilt, making it easier to carry off-center loads.
  • It mainly helps steady the engine and tilt it to slide in the transmission and engine mount.
  • MULTIPLE APPLICATIONS - This hoist load leveler can be applied to engine hoists, shop cranes and cherry pickers.
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Wiseco 74.0Mm Black Anodized Piston Ring Compressor Sleeve By Jm Auto Racing (Rcs07400)

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 7/8" to 1" diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Reimann & Georger 0431328 Classic 400 lb. Platform Hoist Platform Hoist 400 Classic E 28' with 1-1/2 hp Electric Motor

  • Recognized as a market leader and innovator in the hoist and crane industry, Harrington hoists.
  • Our top quality products include electric and air powered chain hoists and trolleys, electric wire rope hoists and trolleys, lever hoists, manual hand chain hoists.
Check Stock

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

X AUTOHAUX 1\ to 1 1/8 Inch -1/4\ Engine Shaft Sleeve Adapter Kit with Step Key for Car

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1" to 1 1/ 8 inch -1/4" diameter. It comes with 2.05" step key..
  • [ ] Made from cold rolled stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Harrington ES1527003 Cable Hanger Assembly 0.3 Ton

  • Recognized as a market leader and innovator in the hoist and crane industry, Harrington hoists.
  • Our top quality products include electric and air powered chain hoists and trolleys, electric wire rope hoists and trolleys, lever hoists.
Check Stock

Robinair 75700 CoolTech Coolant Exchanger

  • 10 minute exchange process means no more waiting for the engine to warm up.
  • Engine off feature removes pulleys belts and fan blades from the safety equation.
  • Vacuum mode creates a push/pull exchange process allowing the technician to safely remove high pressure in a hot system.
  • Leak check feature allows the technician to test for leaks prior to refilling.
  • Two external new coolant supply tanks allow on-board storage of two different coolant types.
Check Stock