Categories

Best Pulleys For Flagpoles

WeValor 30ft Telescopic Flag Pole Kit, Adjustable Heavy Duty Aluminum In Ground Telescoping Flag Pole with 3x5 American Flag, Outdoor Old Glory Flagpole Kits for Yard, Residential or Commercial, Black

  • Reinforced Locking System: We continuously draw on customer suggestions, improve the locking system, add elastic fasteners at each joint to avoid black flag pole collapse, at the same time ensure easy unlocking.
  • Extra Long Service Life: Wevalor 30 ft flag poles are upgraded with 1.2mm aluminum walls, strong enough to withstand high winds and harsh weather, durable enough, and last longer.
  • Adjustable Height: Height Adjust from 5.3' to 30'. You can raise & lower the yards flagpoles as you see fit. It can extend to the full 30 foot or leave it at 20 ft or whatever your desire is.
  • Suitable for Most Flag: You can fly a 3x5 flag, 4x6 flag, 5x8 flag, or most size of flag. You can also fly one flag, 2 flags, or fly flags at half staff as you Suitable for Most Flag: You can fly a 3x5 flag, 4x6 flag, 5x8 flag, or most size of flag. You can also fly one flag, 2 flags, or fly flags at half staff as you need. Perfect for showing your strong national spirit.
  • Can Be Mounted Solar Lighting: It can be easily installed in a few minutes, with a twist-lock design ((no ropes or pulleys), the top rotating shaft avoid the flag from tangling. The thread of the ornament/truck at the top is 0.5.
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

BonyTek 6 Foot Flagpole Kit for American Flag, Metal Flag Pole with Flag Holder and Rings for Residential House Yard Garden Commercial (Black)

  • Adjustable Length: BonyTek flagpole kit comes with four 1.3ft adjustable and removable flagpoles and two rotating rings. You can adjust it from 1.3ft to 6ft depending on the size of the flag. Suitable for 2*3ft, 3*5ft, 4*6ft flags..
  • Thicken Flagpole & Lengthen Screws: Made of heavy-duty stainless steel, the thickness of the flagpole is thickened from 0.38mm to 0.45mm, which is more durable and will not bend, break or warp. The screw of bracket is also lengthened from 30mm to 41mm, making better fixed on the wall and sturdy for outdoor use..
  • Tangle-free Accessories: The flag pole is equipped with two rotating rings and two-position bracket. Keep the flag fluttering in the wind smoothly without tangle with different position as you like..
  • Easy Installation: Flagpoles with threaded joints can be installed without tools. Just rotate and twist the flagpoles and then adjust the position of the rings according to the flag size to complete the installation. Suitable for house, yard, garden, residential, commerical and so on..
  • Package Include- 4* silver splice flagpoles (40cm per pole), 1* silver flagpole head, 2* white plastic flagpole rings (1 inch), 1* aluminum flagpole base, 3* screw kits (screw length 41mm), 1* flagpole fixed screw.
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Flag Pole for Outside In Ground, 30ft Telescopic Flag Pole Kit, Adjustable Heavy Duty Aluminum In Ground Telescoping Flag Pole with 3x5 American Flag, Outdoor Old Glory Flagpole Kits for Yard, Residential or Commercial, Black

  • Reinforced Locking System: We continuously draw on customer suggestions, improve the locking system, add elastic fasteners at each joint to avoid black flag pole collapse, at the same time ensure easy unlocking.
  • Extra Long Service Life: Wevalor 30 ft flag poles are upgraded with 1.2mm aluminum walls, strong enough to withstand high winds and harsh weather, durable enough, and last longer.
  • Adjustable Height: Height Adjust from 5.3' to 30'. You can raise & lower the yards flagpoles as you see fit. It can extend to the full 30 foot or leave it at 20 ft or whatever your desire is.
  • Suitable for Most Flag: You can fly a 3x5 flag, 4x6 flag, 5x8 flag, or most size of flag. You can also fly one flag, 2 flags, or fly flags at half staff as you Suitable for Most Flag: You can fly a 3x5 flag, 4x6 flag, 5x8 flag, or most size of flag. You can also fly one flag, 2 flags, or fly flags at half staff as you need. Perfect for showing your strong national spirit.
  • Can Be Mounted Solar Lighting: It can be easily installed in a few minutes, with a twist-lock design ((no ropes or pulleys), the top rotating shaft avoid the flag from tangling. The thread of the ornament/truck at the top is 0.5.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

BonyTek Flag Pole Kit for American Flag, 5ft Flagpole with Bracket and Rings, Stainless Steel Wall Mounted Flag Poles for House Yard Garden Outdoor Residential or Commercial (Silver)

  • Adjustable Length: BonyTek flagpole kit comes with four 1.3ft adjustable and removable flagpoles and two rotating rings. You can adjust it from 1.3ft to 6ft depending on the size of the flag. Suitable for 2*3ft, 3*5ft, 4*6ft flags..
  • Thicken Flagpole & Lengthen Screws: Made of heavy-duty stainless steel, the thickness of the flagpole is thickened from 0.38mm to 0.45mm, which is more durable and will not bend, break or warp. The screw of bracket is also lengthened from 30mm to 41mm, making better fixed on the wall and sturdy for outdoor use..
  • Tangle-free Accessories: The flag pole is equipped with two rotating rings and two-position bracket. Keep the flag fluttering in the wind smoothly without tangle with different position as you like..
  • Easy Installation: Flagpoles with threaded joints can be installed without tools. Just rotate and twist the flagpoles and then adjust the position of the rings according to the flag size to complete the installation. Suitable for house, yard, garden, residential, commerical and so on..
  • Package Include- 4* silver splice flagpoles (40cm per pole), 1* silver flagpole head, 2* white plastic flagpole rings (1 inch), 1* aluminum flagpole base, 3* screw kits (screw length 41mm), 1* flagpole fixed screw.
Check Stock

BonyTek Flag Pole Kit, 6ft Flagpole for American Flag, Stainless Steel Wall Mounted Flag Poles with Bracket and Rings for House Yard Garden Outdoor Residential or Commercial (Silver)

  • Adjustable Length: BonyTek flagpole kit comes with five 1.3ft adjustable and removable flagpoles and two rotating rings. You can adjust it from 1.3ft to 6ft depending on the size of the flag. Suitable for 2*3ft, 3*5ft, 4*6ft flags..
  • Thicken Flagpole & Lengthen Screws: Made of heavy-duty stainless steel, the thickness of the flagpole is thickened from 0.38mm to 0.45mm, which is more durable and will not bend, break or warp. The screw of bracket is also lengthened from 30mm to 41mm, making better fixed on the wall and sturdy for outdoor use..
  • Tangle-free Accessories: The flag pole is equipped with two rotating rings and two-position bracket. Keep the flag fluttering in the wind smoothly without tangle with different position as you like..
  • Easy Installation: Flagpoles with threaded joints can be installed without tools. Just rotate and twist the flagpoles and then adjust the position of the rings according to the flag size to complete the installation. Suitable for house, yard, garden, residential, commerical and so on..
  • Package Include- 5* silver splice flagpoles (40cm per pole), 1* silver flagpole head, 2* white plastic flagpole rings (1 inch), 1* aluminum flagpole base, 3* screw kits (screw length 41mm), 1* flagpole fixed screw.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

Serpentine Pulley System for Ford 460 - Alternator & Power Steering Applications

  • Polished Billet Aluminum Pulleys & Brackets.
  • 8 Rib Serpentine Pulleys for Increased Grip and Performance.
  • Includes All Pulleys, Brackets and Hardware for a Complete Installation.
  • Requires Saginaw Power Steering Pump with Keyway Shaft.
  • Belts and Accessories (Alternator, PS Pump and Compressor) NOT Included.
Check Stock

Chevy Big Bock Serpentine Kit - Alternator & Power Steering Applications

  • Polished Billet Aluminum Pulleys & Brackets.
  • 8 Rib Serpentine Pulleys for Increased Grip and Performance.
  • Includes All Pulleys, Brackets and Hardware for a Complete Installation.
  • Requires Long Water Pump and Saginaw PS Pump with Keyway Shaft.
  • Belts and Accessories (Alternator, PS Pump and Compressor) NOT Included.
Check Stock

Flagpole-To-Go Flagpole Deck/Dock Mount

  • Made of solid aluminum and powder coated to make this durable for years of service in any outdoor conditions.
  • 5-inch x 5-inch base with 14-inch tall tube.
  • Pre-drilled holes accept a 3/8-inch bolt (hardware not included).
  • Holds all sizes of our portable flagpoles and other flagpoles up to 1.5-inch in diameter.
Check Stock

Chevy Big Bock Serpentine Kit - Alternator, Power Steering & A/C Applications

  • Polished Billet Aluminum Pulleys & Brackets.
  • 8 Rib Serpentine Pulleys for Increased Grip and Performance.
  • Includes All Pulleys, Brackets and Hardware for a Complete Installation.
  • Requires Long Water Pump and Saginaw PS Pump with Keyway Shaft.
  • Belts and Accessories (Alternator, PS Pump and Compressor) NOT Included.
Check Stock