Categories

Best Pump Shaft Seals

Vacuum Pump Reseal Kit for Cummins Vacuum Steering Pumps 91-02 Wabco Dodge Ram Diesel VITON DOUBLE LIP SEAL

  • Only Kit with Viton Shaft Seal With Double Lip (Rides On New Shaft Areas).
  • Includes Main Seals Required For Leak Free Rebuild.
  • For a fully leak free seal, we suggest a bead of RTV instead of a pump to case gasket.
Check Stock

Water Pump Gasket Kit with Bearings for HONDA CRF 450 R 2002-2008

  • Perfectly compatible with the original parts and meets or exceeds O.E.M. Specifications.
  • High quality and reliability manufactured in state of the art computer controlled facilities.
  • Best value for money, 60% of European manufacturers use these gaskets O.E.M..
  • Note: Kit contents vary by application. Usually includes water pump gasket, clutch cover gasket, water pump shaft oil seals, washers and bearings..
Check Stock

Canpump Pressure Washer Triplex Pump, 3,000 PSI at 3.1 GPM, 3/4-inch Horizontal Shaft

  • 3,000 psi at 3.1 gpm, 6.5 hp at 3,400 rpm, 3/4-inch hollow shaft, horizontal mount direct-drive, 4.78 mm keyway, 3/4-inch standard garden hose inlet, 3/8-inch quick-connect outlet, 50°C (122°F) max. inlet water temperature.
  • Replacement pump kit with near-universal compatibility for standard 3/4-inch shaft direct-drive gas engines from Honda, Annovi Reverberi, RIDGID, Blackmax, Generac, Husky, Excell, Troy-Bilt, Sears, Briggs & Stratton, Campbell Hausfeld and more.
  • Forged brass and anodized aluminum construction with cooling fins.
  • Durable 15 mm ceramic-coated solid stainless steel plungers.
  • Detachable and pressure-adjustable internal bypass unloader valve with detergent injector and built-in water filter.
  • Includes detergent tube with strainer, set of extra O-rings, pre-filled SAE 15W-40 oil, and operating manual with spare parts list.
  • 7x5 toll-free phone, email and live chat support from Canada.
Check Stock

Ace Pumps FMC-150F-HYD-206 Hydraulic Driven Centrifugal Pump, Flanged, for Open Center Systems Up to 16 GPM (60.6 LPM), 1-1/2" x 1-1/4"

  • MOUNTING VERSATILITY: The location of the pump is not tied to the PTO or engine drive shaft.
  • the pump can be mounted in a variety of locations to suit application requirements.
  • Customized Performance: A hydraulic driven pump can produce higher pressures than PTO or belt driven pumps.
  • EASY MAINTENANCE: On a hydraulic driven pump there are no belts to align or break. Separate pump and hydraulic motor shafts simplify repair and replacement.
  • All pumps are equipped with easily replaceable Viton mechanical seals.
  • They can hold constant pressure at varying engine speeds on closed center hydraulic systems.
Check Stock

TECHTONGDA 3T/H Sanitary Self-priming Pump Self-suction Food Grade Centrifugal Pump Stainless Steel Transfer Machine for Beverage Liquid

  • Self-priming pump, with compact structure, beautiful appearance, light weight, convenient operation..
  • Adopting smooth transition, rigid structure and thick-wall design, the parts of the pump body, pump cover, impeller, etc that are in contact with the material are all made of stainless steel..
  • The pump body and impeller adopt integrally precision casted , and all parts are surface treated..
  • Mechanical shaft seals are made from high quality stainless steel and silicon carbide,improving wear resistance and lubricity and extend service life..
  • This sanitary pump is suitable for conveying various liquids such as milk, beverages and wine. It is an indispensable conveying equipment for food, chemical and other industries. It is especially suitable for systems with large resistance such as tube sterilization, yogurt temperature control equipment and CIP cleaning..
Check Stock

Wsm 20-3700 Jet Pump Assembly Sd Sd 580/650/ 720/800

  • Complete jet pump assemblies for Sea Doo watercraft.
  • Comes complete and assembled with housing, bearings, and seals.
Check Stock

Permatex 24200 Medium Strength Threadlocker Blue, 6 ml

  • Locks and seals while preventing parts loosening due to vibration.
  • Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm).
  • Removable with hand tools for easy disassembly.
  • Suggested Applications: valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Check Stock

Hot Rods TBK0075 Transmission Bearing Kit

  • A must have for any new transmission or engine case installation or repair.
  • Includes Hot Rods trusted bearings for primary and secondary shafts of transmission.
  • Includes special needle bearing for shift drum.
  • Does not include water pump bearing or counter balancer bearings or oil seals.
Check Stock

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

New Pivot Works Linkage Rebuild Kit PWLK-K28-000 For Kawasaki KX 125, KX 250 F 04 05, KX 250 04 05 06 07, RMZ 250 04 05 06

  • Perfectly compatible with the original parts and meets or exceeds O.E.M. Specifications.
  • High quality and reliability manufactured in state of the art computer controlled facilities.
  • Best value for money, 60% of European manufacturers use these gaskets O.E.M..
  • Note: Kit contents vary by application. Usually includes water pump gasket, clutch cover gasket, water pump shaft oil seals, washers and bearings..
  • Fitment: KAWASAKI KX 250 F 2004-2008, SUZUKI RMZ 250 2004-2006.
Check Stock

MEDAS 1/2 HP 350W 2113GPH Electric Submersible Pump Portable Sump Pumps Clean Water Pump for Pool and Pond Draining Garden Pool in Clean Water

  • 【PORTABLE AND PRACTICAL SUMP PUMP 】: 350W (1/2 HP) Electric Submersible Clean Water Pump, Model: MQ350.
  • Voltage:110-120V/60Hz Diameter: 1",1-1/2",....
  • 【HIGH-QUALITY AND DURABLE MATERIALS】: High-quality bearing, seals and stainless motor shaft with special treatment ensure long life time..
  • 【ECONOMIC AND SAFE PUMP】: Low consumption electric motor with overload protection ensure safe operation. Lower noise and energy-efficient..
  • 【EASY TO USE】: Quickly and efficiently drain pools, ponds and flooded basement..
  • 【100% CUSTOMER SATISFYING GUARENTEE】: If for any reason, you are not Satisfied - Please let us know why and we will fix it and we'll give you a....
Check Stock

PEGGAS 3/4\ Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Better than your OEM Pump and Engineered to work on most gas power washers.

  • 3,600 psi at 4.76 gpm, 13 hp at 3,400 rpm, 1-inch hollow shaft, horizontal mount direct-drive, 6.35 mm keyway, 3/4-inch standard garden hose inlet, 3/8-inch quick-connect outlet, 50°C (122°F) max. inlet water temperature.
  • Replacement pump kit with near-universal compatibility for standard 1-inch shaft direct-drive gas engines from Honda, Annovi Reverberi, RIDGID, Blackmax, Generac, Husky, Excell, Troy-Bilt, Sears, Briggs & Stratton, Campbell Hausfeld and more.
  • Forged brass and anodized aluminum construction with cooling fins.
  • Durable 15 mm ceramic-coated solid stainless steel plungers.
  • Detachable and pressure-adjustable internal bypass unloader valve with detergent injector and built-in water filter.
  • Includes detergent tube with strainer, set of extra O-rings, pre-filled SAE 15W-40 oil, and operating manual with spare parts list.
  • 7x5 toll-free phone, email and live chat support from Canada.
Check Stock

ShinMaywa 50CR2.75S Norus Stainless Steel Submersible Pump, 1 Horsepower by Standard Plumbing Supply

  • Anti-vibration bearings for excellent structural integrity.
  • Dual mechanical shaft seals: silicon carbide and carbon ceramic.
  • This 1hp 115V pump only uses 10 Amps for a 6780gph max flowrate and 48' max head.
  • Measures 9.45" Diameter x 15.5"H and weighs 19lb with 33' cord.
Check Stock