Categories

Best Punch And Flange Tool

QUALITY TOOLMAKER'S PARALLEL CLAMPS VICE VISE TOOL STEEL DIY CRAFT WOOD WORKING ENGINEERING TOOLS (4\ / 100 mm) (U)

  • The Pop-It tool flange spreader is used for both flange spreading and equipment lifting. Simply put, it’s the most versatile tool on the market for these applications..
  • The Pop-It flange spreader takes the place of a hammer and wedge and can spread or lift 10,000 pounds up to 5.5 inches with 120 pounds of force at the ratchet handle..
  • The Pop-it Tool flange spreader can be used in a multitude of industry applications such as gasket replacement, blinding, drive shimming, and valve service..
  • The Pop-It Tool also works well when lifting equipment for alignment work, removing gears or impellers from shafts..
  • The Pop-it Tool replaces wedges and pry bars to protect your workers. The Pop-it Tool replaces wedges and pry bars to protect your workers. The Pop-it Tool replaces wedges and pry bars to protect your workers. The Pop-it Tool replaces wedges and pry bars to protect your workers..
Check Stock

Leather Hole Punch Tool for Belt - Updated Hole Sizes Puncher for Belt, Watch Band, Strap, Dog Collar, Saddle, Shoes, Fabric, DIY Home or Craft Project - with 5/32" Grommet Eyelet Kit 100 Sets

  • ... 【Grommet kit set】Includes a set of matched mandrel (2 pcs) and 100 sets of grommets eyelets (each set includes 1 eyelet and 1 washer), the grommets eyelets are one size with 3 colors, the eyelets size is that 5/32 inch (4mm) internal hole diameter, 5/16 inch (8mm) outside flange diameter. they are good for add grommet eyelets in shoes/ shoelaces, clothing, crafts projects, etc..
  • 【Hole Punch Tool Kit】Including 1 belt hole puncher, 3 free spare brass pad, 1 screwdriver, 1 carborundum rod, 1 ruler, 1 user manual. The ruler can measure your piece accurately and the screwdriver can replace spare plates and twist the screws on the belt..
Check Stock

ABN Spring Loaded Center Punch, Automatic Center Punch Tool – Auto Center Punch, Awl Punch Hole Punch Tool, 5in

  • EASY TO USE SPRING PUNCH TOOL: Put away your hammer, pilot, and center drill and instead use the ABN Center Punch Spring Loaded Nail Setter Tool to make or mark the center of a hole you wish to create.
  • Press down on the nail set tool until the tip of the hammer nail fully retracts into the handle, the spring-loaded trigger will release, and the blade of the metal punch tool will mark the workpiece.
  • FITS YOUR PROJECT: Nail spring tool marks your workpiece with a dimple to give you a starting point that prevents screws and drills from wandering.
  • Use this automatic center punch for metal, wood, glass, canvas, plastic, and leather materials.
  • Use this spring loaded center punch glass break window breaker to enter a car in emergencies or use as a spring loaded awl for your belts or purses.
  • ADJUST FOR ACCURACY: Spring-driven action with adjustable strike force makes punching easier with this simple to use nail punch tool drill marker.
  • Increase and decreased the stroke for higher or lower impact by tightening and loosening the adjustable cap on the nail set punch nail hammer tool.
  • BUILT TO LAST: Center hole punch shank body is constructed from chrome-plated steel for maximum strength and longevity that allows for high impact force and resists corrosion.
Check Stock

Glarks 20Pcs 25MM/1'' Bronze Metal Thickened Grommet Eyelets with Washers Kit for Leather, Tarp, Canvas

  • ♛ [Package Includes]: In this kit, you'll receive 20pcs 25mm/1'' bronze grommet eyelets, which are packed in a plastic bag, abundant quantities to meet your needs..
  • ♛ [Thickened Material]: Our grommet eyelets are made of thickened metal material, strong and solid, They are light in weight and sturdy. Thickened eyelet and washers are harder and more durable. At the same time, the surface is bright and shiny, beautiful and generous..
  • ♛ [Sizes]: 25mm in internal hole diameter, 40mm in outside flange diameter, and 6.7mm in barrel length..
  • ♛ [Easy to use]: First use a punch hole tool to drill a hole in your material. Then insert the eyelet into the hole, and use a stud to hold it. Finally, use a fastening tool to fix the eyelet on the material..
  • ♛ [Wide Application]: Suitable for shoes, clothing, shoelaces, DIY crafts projects, tarps, awnings, and leather crafts and adding ornament to your crafts etc. Also suitable for repairing canvas, tarps, tents and pool coverings..
Check Stock

Light Duty Utility Clamp, 8.5\ Capacity, 500 LB Clamping Pressure, 5/8\-5/16\ Rail Size, 3-1/4\ Throat Depth, 5/16-18\ Tapped Hole, UD85, Strong Hand Tools

  • The Pop-It tool flange spreader is used for both flange spreading and equipment lifting. Simply put, it’s the most versatile tool on the market for these applications..
  • The Pop-It flange spreader takes the place of a hammer and wedge and can spread or lift 10,000 pounds up to 5.5 inches with 120 pounds of force at the ratchet handle..
  • The Pop-it Tool flange spreader can be used in a multitude of industry applications such as gasket replacement, blinding, drive shimming, and valve service..
  • The Pop-It Tool also works well when lifting equipment for alignment work, removing gears or impellers from shafts..
  • Kit includes (2) P95-525 Pop-It Tools, (2) SMP Safety Chocks, and a hardened carrying case with custom foam inserts. The Pop-it Tool replaces wedges and pry bars to protect your workers. The Pop-it Tool replaces wedges and pry bars to protect your workers. The Pop-it Tool replaces wedges and pry bars to protect your workers..
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
  • For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
  • Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock

NEIKO 02639A 6-Inch Automatic Center Hole Punch with Adjustable One-Handed Spring Impact Chrome-Plated Shank and Premium S2 Steel Tip

  • DRILL PUNCH TOOL: This 6-Inch Automatic Center Hole Punch is the perfect centering punch device to help start screw and drilling holes. Align the tip of this metal hole punch on a variety of hard surfaces to create center holes for fasteners..
  • ADJUSTABLE HOLE-PUNCH TOOL: The spring-loaded center-punch design uses spring tension that can be modified and adjusted for light or heavy marking, punching, or staking. Change the strike force any time to match the surface you are working with..
  • QUALITY MATERIALS: With a chrome-plated shank body and a hardened S2 steel tip, this corrosion-resistant wood-and-metal punch tool can withstand high-impact punches and force. The knurled, nonslip cap gives you a firm one-handed grip on the tool..
  • EASY ONE-HANDED USE: This one-handed automatic center punch needs only your hands—no hammer required. Use the S2 tip on a sturdy surface to center where you want the starter hole, and punch the tool downward to create the drill marker..
  • COMPACT SIZE: This automatic one-hand punch is small enough to fit in any toolbox or pocket. Carry it with you from job to job for a convenient and easy starter drill bit. You can also use this as a spring-loaded glass breaker for emergencies..
Check Stock

NEIKO 02638A 5-Inch Automatic Center Hole Punch, Adjustable Impact Spring-Loaded Puncher Tool

  • CENTER HOLE-PUNCH TOOL: Our 5-inch automatic center punch tool is a great tool for working with materials like wood, plastic, metal, glass, and leather. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project..
  • COMPACT STEEL TIP: Center punches are important when it comes to marking an accurate drilling location. With the spring-driven action and hard steel awl tip, our hand-held puncher lets you mark drill holes anywhere while on the job..
  • HEAVY DUTY WITH IMPACT: This chrome-plated shank body withstands intense impact force, and the metal resists corrosion and damage over time. The reinforced S2 steel tip holds up to hard materials and makes surfaces ready for any nail or drill..
  • EASY USE & GRIP: With a nonslip surface and a precision-centered tip, this center metal punch has increased force control for accurate holes every time. Activate this tool with a firm downward push to achieve the exact size hole you need..
  • ALL-IN-ONE CENTER PUNCH: This spring-loaded glass breaker and center punch tool is suitable for all kinds of tasks. Whether you need a window hole puncher, an awl for leather belts, or a metal hole punch, this efficient tool gets the job done right..
Check Stock

Astro 605ST ONYX Straight Type Punch/Flange Tool

  • Features a rotating head for convenient use.
  • Every pull of the lever delivers a single punch or a single flange crimp with precision control..
  • Forms an offset crimped edge on sheet metals for no-bump lay welds.
Check Stock

Astro 608PT ONYX Pistol Grip Punch/Flange Tool

  • Features a rotating head for convenient use.
  • Every pull of the lever delivers a single punch or a single flange crimp with precision control..
  • Forms an offset crimped edge on sheet metals for no-bump lay welds.
Check Stock

Punch Needle Kits, MOMSIV DIY Rug Hooking Kit for Adults Kids Beginner with an Adjustable Embroidery Pen Yarn Rug Punch Needle Hoop (Mountain)

  • Includes (1) adjustable punch needle tool, (4) interchangable gauge needles, (1) spool, and (1) needle threader..
  • This punch needle embroidery tool set includes 4 needle sizes: 1.26mm, 1.6mm, 2.2mm, and 3mm..
  • Save time changing colors when working on your punch needle project with this easy to use embroidery tool!.
  • Easily create gorgeous embroidery details and crafts with this adjustable punch needle tool..
  • Use the included needle threader and spool to load your punch needle tool with your preferred thread, then get crafting!.
Check Stock

Raydodo 200 Sets Reinforced Grommet Kit, 3/16 Inch Metal Brass Eyelet Kit with 3 Pieces Grommet Tool Boot Eyelet Repair Kit and Grommets for Fabric, Tarps, Leather, Belt with Storage Box

  • 【Grommet Size】3/16 inch (5 mm) inside hole diameter, 0.36 inch (9 mm) outside flange diameter, approximate 3/16 inch (5 mm) barrel length, perfect size for diy crafts.
  • 【Sturdy Hardware】Made of premium stainless cooper with plating colored crafts, not easy to bend and rust in humid environment, smooth both front and back side after well installed, NO RISK to cut skins.
  • 【Tailormade Tools】Sharper hole punch tool & upgrade install tools, easy to install eyelets following the steps with instructions (clear pictures and words) even you are a newer, really perfect grommet tool kit for repairing.
  • 【Muti-Use】Our metal eyelets and washers are suitable for fabric, tarps, leather, belts, awnings, tents, canvas, bags, diy clothing, arts & crafts, shoes, pants, jackets, flag, scrapbooking, enjoy diy and save money.
  • 【What You Get】Instructions x 1 pcs, Gold grommets x 100 sets, Silver grommets x 100 sets, Install Tool x 3 pcs, Storage Boxes x 1 pcs, 24-hours customer service by email for your satisfactory.
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the dr....
Check Stock