Categories

Best Punched Ventilation Hoods

CAVALIERE 36\ Wall Mounted Stainless Steel/Glass Kitchen Range Hood 900 CFM SV218D-36

  • PICTURESQUE DESIGN - Designated to let you undergo an aesthetic cooking experience, Cavaliere 36 inch wall mount range hood provides flawless ventilation through an adjustable chimney. The picturesque 19-gauge brushed stainless steel/tempered glass design is easily cleanable and highly durable against heat while also being rust-proof. Overall dimensions of rangehood are 35.4 x 19.7 x 47.5 inches.
  • IMPECCABLE FILTRATION - 900 CFM whisper-quiet high-powered centrifugal motor efficiently eliminates food fumes and highly toxic pollutants from your kitchen atmosphere. The dishwasher-friendly aluminum mesh filters effectively absorb grease moisture, cooking steam and unwanted odors. Thus, a complete 360 ̊ exhaust solution.
  • SMART TECHNOLOGY - Touch-sensitive keypad with LCD Display that is controllable with a credit-card-sized remote control that allows the user to easily adjust the light settings of 2 LED lights.
  • 6 fan speeds with timer option and unique heat-sensitive auto speed (HSAS) function. These range hoods also feature 1-to-15 minute programmable delayed power shut-off.
  • TEMPERED GLASS WALL-MOUNT - A unique tempered glass covering over the majestic stainless steel structure is what enhances the eye-catching beauty of these wall-mount range hoods. They ....
Check Stock

Tosucs Flexible Vent Hose 4 Inches & 16 Feet Aluminum Hose for Ventilation Exhaust 100mm Duct Heat and Waterproof Equipment 2 Pieces 100mm Hose Clamp………

  • The pipe material is mainly aluminum foil and steel wire. Due to the special laminated structure of the two-layer aluminum foil, it has excellent durability and air tightness, as well as UV resistance..
  • Diameter 4 inches x Length 16 feet. When stored: 4 (length) * 4 (width) * 13 (height) inches. Equipped with two 100 mm hose clamps..
  • Duct hose temperature range from 0 to 200 degrees Celsius. Durable and sturdy for long life. Can be retractable, a universal change..
  • It can be expanded and contracted and bent, making it easy to install. Easy to cut with scissors and nippers. The maximum can be extended up to 16 feet and can be adjusted as needed..
  • Ventilation pipes are used in various construction sites to assist in ventilation, ventilation, and exhaust. Ventilation pipes can be used for range hoods, air conditioners, ventilators, blowers, and can realize an efficient transportation system..
Check Stock

CAVALIERE 30\ Wall Mounted Stainless Steel Kitchen Range Hood 860 CFM AP238-PSF-30

  • AESTHETICALLY PERFECT - Designated to let you undergo an aesthetic cooking experience, Cavaliere 30 inch wall mount range hood provides immaculate ventilation through an adjustable chimney. The charming 19-gauge brushed stainless steel design is easily cleanable and highly durable against heat while also being rust-proof. Overall dimensions of range hood are 19.7 x 29.5 x 43 inches.
  • ROBUST EXHAUST SYSTEM: 860 CFM high-powered centrifugal motor efficiently eliminates food fumes and highly toxic pollutants from your kitchen atmosphere. Noise levels are as low as 35 dB and not more than 67 dB depending on fan speed. The dishwasher-friendly stainless steel baffle filters effectively absorb grease moisture, cooking steam and unwanted odors. Thus, a complete 360 ̊ exhaust solution.
  • SMART TECHNOLOGY: Touch-sensitive keypad with LCD Display that is controllable with a credit-card-sized remote control that allows the user to easily adjust the light settings of 2 LED lights.
  • 6 fan speeds with timer option and unique heat-sensitive auto speed (HSAS) function. These range hoods also feature 1-to-9-minute programmable delayed power shut-off and 30-hour cleaning reminder.
  • WALL-MOUNT DESIGN: The pyramid-shape wall mount hoods are wider on the bottom and stretch over ....
Check Stock

CAVALIERE 30\ Wall Mounted Stainless Steel Kitchen Range Hood w/Remote Control 900 CFM AP238-PS29-30

  • ✅ AESTHETICALLY PERFECT - Designated to let you undergo an aesthetic cooking experience, Cavaliere 30 inch wall mount range hood provides immaculate ventilation through an adjustable chimney. The charming 19-gauge brushed stainless steel design is easily cleanable and highly durable against heat while also being rust-proof. Overall dimensions of range hood are 30 x 20.5 x 42 inches.
  • ✅ ROBUST EXHAUST SYSTEM - 900 CFM high-powered centrifugal motor efficiently eliminates food fumes and highly toxic pollutants from your kitchen atmosphere. Noise levels are as low as 43 dB and not more than 55 dB depending on fan speed. The dishwasher-friendly stainless steel baffle filters effectively absorb grease moisture, cooking steam and unwanted odors. Thus, a complete 360 ̊ exhaust solution.
  • ✅ SMART TECHNOLOGY - Touch-sensitive keypad with LCD Display that is controllable with a credit-card-sized remote control that allows the user to easily adjust the light settings of 2 illuminating 35-Watt GU10 Halogen lights.
  • 4 fan speeds with timer option and unique heat-sensitive auto speed (HSAS) function. These range hoods also feature 1-to-15-minute programmable delayed power shut-off.
  • ✅ WALL-MOUNT DESIGN - The pyramid-shape wall mount hoods are wider on the bottom....
Check Stock

Broan 459 Range Hood Round Transition Duct, 3-1/4" x 14" to 8"

  • Perfect for Broan Range Hoods and Ventilation Fans Durable steel construction Made for fan and hood installations.
Check Stock

Royal 24 Inch Light Brown Hairnet, Lightweight Nylon, Package of 144

  • PACK OF 100 FULL FACE HAIR NETS: The white PPE caps have an elastic band around the face for a snug fit. One size of polypropylene hair net fits most..
  • DISPOSABLE HEAD COVER is made of breathable polypropylene. Beard covers nets are designed for use in the food service industry. Hairnets for cooking cover both the hair and beard area for the ultimate protection. These beard and hair nets provide excellent comfort..
  • DISPOSABLE BOUFFANT HOODS are an economical choice for all basic covering needs. These polypropylene hooded caps feature an affordably priced disposable design. Save your money by maintaining hygiene in your workplace!.
  • SOFT AND LIGHTWEIGHT PPE HAIR COVER has a stretchy band that keeps cap in place. The polypropylene net maintains your hairstyle while you work and keeps your head clean and neat. Protective hood provides good head ventilation. Elastic non-woven hoods universal are suitable to wear for a long time..
  • UNIVERSAL MEDICAL HOOD is used to cover hair to prevent it from falling on the work area. Disposable scrub caps are suitable for electronics manufacturing, restaurants, schools, factories, cleaning, public places. Disposable hood caps are an excellent dust barrier..
Check Stock

Hardware kit for Food Truck/Concession Trailer Hood Installation

  • The installation kit is to be used on Ventilation Direct food truck/ concession trailer exhaust hoods sizes 4ft-10ft..
  • INSTALLATION KIT Hardware kit for Concession Trailer hood installation..
  • Includes Qty-6 8″ long SS bolts, Qty-16 1/2″ SS washers, Qty-16 1/2″ SS nuts and Qty-4 Garlock 3000 series washer..
Check Stock

RKI 4" - Professional Backdraft Damper Inline Spring Loaded for Dryer Duct

  • Back draft damper for insertion into 4 inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • A tight sealing and fastening of the duct is achieved by the rubber strip attached to the outside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel.
  • Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents and other residential, commercial and industrial HVAC applications.
  • FUNCTIONALITY: Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no (cold) air / wind can penetrate the ventilation pipe from the outside..
Check Stock

Vent Systems 8 Inch Backdraft Damper - Backflow Shutter - Heavy-Duty Inline Springs Loaded - One-Way Airflow Ducting Insert - Inline Fan Vent Deflector

  • Back draft damper for insertion into 8 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be....
  • A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents....
  • Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial....
  • Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves....
  • The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be....
Check Stock

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

iPower 4 Inch 8 Feet Non-Insulated Flex Air Aluminum Foil Ducting and Backdraft Shutter Damper for HVAC Extractor Fan Vent, Range Hoods, 2 Clamps Included

  • Ducting size: 4 inches (diameter) x 8 feet (length) when fully extended. Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃). A pair of 4 inch stainless steel metal clips makes the installation firmer.
  • Fire proof coating ducting: Flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.
  • Backdraft Shutter Damper: Made of a Galvanized steel. Withstand temperatures from 14 to 140 °F. Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Low noise design: An internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for backdraft shutter damper horizontal installations so that it can open and close optimally.
  • Wide applications: A pair of metal clamps makes ducting and damper securely fixed. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock

Hydrofarm ACR0604 Air Conditioning Duct Reducer, 6 by 4-Inch, Silver

  • These galvanized duct reducers can be used with fans, ducting, air-cooled hoods, and ventilation systems.
  • Consider these reducers as a patch between your current unit and the ducting you want to run.
  • Never be restricted to your air conditioner's ducting requirements again.
  • Item Package Dimensions: 13.6" L x 18.0" W x 13.6" H.
Check Stock

iPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock