Best Push Up Antenna Masts
12 Inch Heavy-Duty Antenna Wall Mount, 1 Pair
- Brackets can accommodate masts up to 2-1/2" outer diameter.
- Use to mount a mast against buildings/houses.
- Perfect for outdoor TV antenna & dish installations.
- Sturdy metal construction | Standoff from wall: 12 inches.
- (2) U-Bolt with V-Block Brackets included with lag bolts.
Check StockSkywalker SKY32812 (1 Pair) 4\ Double Wall Mount (SKY-32812)
- Brackets can accommodate masts up to 1-1/2" outer diameter.
- Use to mount a mast against buildings/houses.
- Perfect for outdoor TV antenna & dish installations.
Check Stock45-60 Inch Adjustable Eave Mount for Antenna
- Brackets can accommodate masts up to 1-1/2" outer diameter.
- Use to mount a mast against buildings/houses.
- Perfect for outdoor TV antenna & dish installations.
Check StockStellar Labs 33-10905 Heavy Duty 3' Antenna Tripod
- Rooftop tripod mount is perfect for all types of outdoor television antennas as well as small communication antennas and satellite dishes..
- Accepts mast pipes up to 1-5/8" diameter and supports 5' to 10' masts easily..
- Length: 36 in Width: 6.75 in. Height: 6.25 in..
- Weight: 8 lbs. Note: Separately roof anchors are available..
Check StockUniversal Hidden Windshield Antenna, AM/FM Electronic Radio Antenna with Stereo Radio and Hidden Antenna
- Scope of application —- Hidden Windshield Antenna universal suitable for custom vehicles, carts, boats, motorcycles, ATVs or any vehicle that does not require unsightly antenna masts..
- Function —- The frequency of Car Radio Antenna cover all AM/FM broadcast radio.You can choose the project interested.It is used to enhance the car radio signal to make the sound quality clearer..
- Practical design —- Car Antenna Car Stereo with self-adhesive,you can stick it anywhere in the vehicle, such as glove boxes, dashboards, luggage, hatchbacks and rear window etc. it facilities to installation as well..
- Exquisite structure —- FM Antenna Signal Amplifier has a lamp-shaped plug and a 3 meter-long cable that it could save time and make user comfortable .Get rid of annoying stock antenna design to meet the customer demand for fashion..
- Note —- You should pay attention to thoroughly clean and press hard for a while before pasting to avoid to flash in an short time..
Check StockField Expedient SDR: Introduction to Software Defined Radio (black and white version)
- ...improved by up to 6dB, tuning accuracy is improved by an average of 4x, and the frequency range is expanded all the way down to 100kHz.
- v5 has a frequency capability of 100kHz to 1.75GHz and up to 3.2MHz of instantaneous bandwidth. HF reception below 25MHz is accomplished with direct sampling and requires a suitable antenna. We recommend using a Balun One Nine to make a DIY long wire or dipole antenna (sold separately, product ID B08HGSYB7R or B00R09WHT6).
- Though the direct sampling implementation of NESDR SMArt v5 is much better than any other RTL-SDR, we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience (sold separately, product ID B076CYK8XZ).
- Your purchase includes a NESDR SMArt v5 RTL-SDR, a magnetic antenna base with a 2m (6.5′) RG-58 feed cable, and 3 different antenna masts for UHF and VHF operation, including a variable-frequency telescopic antenna.
- Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty and product support through our support portal at https//support.nooelec.com.
- Full datasheet available: https://www.nooelec.com/datasheets/100700.
Check StockNooElec NESDR Smart XTR Bundle - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, 0.5PPM TCXO, SMA Input
- Premium RTL-SDR bundle includes NESDR SMArt XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts.
- A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 separate RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector.
- Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
- SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
- Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
Check StockNESDR SMArTee XTR Bundle - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, Bias Tee, 0.5PPM TCXO, SMA Input
- Premium RTL-SDR bundle includes NESDR SMArTee XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts.
- A wide variety of improvements on other designs, including integrated 4.5V 250mA bias-tee, ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector.
- Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
- SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
- Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
Check StockZLLY Mount MOUNTING Pole MAST for Antenna Satellite J-Mount Dish Outdoor White Color
- Ideal for flat-roof mounting a TV Antenna or Dish.
- Safe & secure installation on flat roof surfaces.
- Heavy-duty steel construction | Base consists of (6) lengths which can be assembled from 35.5" x 35.5" up to 36" x 36" square | Works with standard grade 2 bolts.
- Requires concrete block ballast for installation (not included).
- Requires mast for installation (not included).
- see our selection of masts: SKY32817A, -B, -C1 or -D.
Check StockHeavy-Duty Tripod Base with 1.66 Inch Mast 3 Feet
- Permanently mount an antenna or satellite dish on the roof with Skywalker’s Heavy Duty 3ft Tripod Base. The mast AND installation hardware is....
- An advantage of Tripod mounts is that you can mount them almost anywhere. From the peak of a rooftop to a flat platform, this tripod can handle it.....
- The Tripod is surprisingly heavy duty without being overly weighty which, conveniently, makes it easy to carry up a ladder. It folds out into the....
- Tripod comes with its own 1.66" x 28” mast to get you started. It is secured in place via the bolts and nuts attached to the Tripod at the mast base....
- The Skywalker Signature Series Heavy Duty 3ft Tripod Base can support masts up to 2" OD..
Check StockRaTLSnake M6 v2 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and Other Software Defined Radios. Magnetic Whip Antenna Set Made with Low-Loss RG58 Cable for Radios with 50 Ohm SMA Connectors
- Heavy-duty, wide-band premium antenna bundle for RTL-SDR and other SMA radios. Long 2m (6') cable made with low-loss RG-58.
- Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Specially designed for wideband software defined radios.
- Male SMA connector on antenna cable for easy connectivity to all 50Ω SMA-input radios like our NESDR SMArt series and HackRF One.
- Redesigned for 50Ω to maximize compatibility with commonly used radios and to reduce SWR mismatches. The base has been redesigned to improve ground plane coupling and shielding over v1..
- Antenna base is constructed from heavy-gauge metal for resilience and longevity. Includes full 1 year warranty direct from Nooelec!.
Check StockNooelec NESDR Smart v4 Bundle - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio.
- Premium RTL-SDR bundle includes newly designed NESDR SMArt in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
- A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector.
- Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
- SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, available on Amazon (Product ID B009LQT3G6).
- An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR).
Check StockNESDR SMArTee v2 Bundle - Premium RTL-SDR w/Integrated Bias Tee, Aluminum Enclosure, 0.5PPM TCXO, SMA Input, Antenna Base & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio (SDR)
- An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases!.
- Unmatched price & performance–redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed .
- Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues–run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi!.
- Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software.
- Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock