Best Pva Film Bag

Hydrographics Film - Blank Water Transfer Printing Film - 12 Pcs A4 Size Blank Water Transfer Printing Film - Blank Water Transfer Film

• Hydrographics Film - Water transfer printing -Cubic Coating -Blank Water Transfer Film.

3D Printlife E PVA: Enhanced PVA, 1.75mm Natural, Water Soluble Support 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm (500g)

• Enhanced PVA formulation with improved stability for 3D printing.
• Bonds well with PLA, ABS, and PETG with excellent water solubility, even in cold water.
• Much greater thermal stability than standard PVA.
• Perfect support for prints with large overhangs or complex internal geometries.
• Do not exceed a printing temperature of 225˚C or E PVA will crystallize too quickly and will no longer flow and/or dissolve in water..
• Store in a resealable bag with desiccant between 0°C and 30°C, away from UV light, and we recommend the relative humidity stay below 50%..
• Difficulty: Advanced. Please note that all PVA's are very sensitive to moisture and humidity. E PVA comes vacuum sealed but we strongly recommend using a filament dryer before removing from storage after initial use..

Fused Materials PVA 3D Printer Filament, 1.75mm, 1kg roll - Dissolvable Filament - Water Soluble Filament for 3D Printers and 3D Pens

• PREMIUM PVA: Our professional grade filament ensures better dissolvability, stronger toughness, smoother printing, no bubbles, no warping, and a pleasant tangle-free experience. ROHS and CE certified..
• DISSOLVABLE FILAMENT - Fused Materials PVA is a water-soluble filament used with dual extruder 3D printers to print support structures, molds, complex shapes and more!.
• OPTIMIZED FOR PLA – Fused Materials PVA was designed to be a user-friendly dissolvable material and works best with many common materials such as PLA..
• VACUUM SEALED: Fused Materials PVA is comes packaged in a vacuumed resealable mylar pouch with an added desiccant to preserve the filament quality. When the filament is not in use, easily reseal the bag to prevent dust build up and moisture buildup..
• TECHNICAL SPECIFICATIONS: Consistent Diameter - +/- .03mm dimensional accuracy. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 1.50.
• 1 kg spool (2.2lbs). Recommended extrusion/nozzle temperature 190°C - 220°C, bed 50-80℃. Works perfectly with all common 1.75mm FDM 3D printers..

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Quart

Polytek PolyCoat Sealer & Release Agent (1.5lb)

PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

The Super® Jumbo 16' PVA Sponge Mop Set (Mop and 1 Extra Refill)

• The Super Jumbo 16" PVA Sponge Mop Set - World's Largest PVA Mop.
• Includes PVA Mop, Extra PVA Mop Refill, and Telescopic Handle.
• 100% Pure PVA Sponge in Patented Non-Slip Gripper.
• Robust Handle - Used Commercially by Janitors, Veterinarians, and Restaurants.
• Picks Up Pet Hair, Dust, and Liquid Like a Magnet - Doesn't Drip!.

PVA Filament, Water Soluble Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers, Natural

• 【Attention Please】This filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water. Therefore, this PVA filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-60°C to achieve the purpose of easily removing the support. If you want PVA filament that is completely soluble in water, please do not buy this product. If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice..
• 【Water Soluble PVA】Water-soluble Polymer. Not completely dissolved, but softening and layering,then peel off with your hands. It will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!.
• 【HIGH PERFORMANCE】 With even tight winding, clog-free and bubble-free, always maintain a smooth feeding during printing, effectively reduce unexpected printing interruptions. Enjoy design and bring to life your inventions..

PVA Sponge Mops for Floor Cleaning Squeeze with 60" Long Handle, Self Wringing Mop with 15" Head for Kitchen Bathroom Tiles, Sponge Mops for Floor Cleaning with Wringer DUDTO

• Large size PVA mop – 15" PVA sponge mop Head and 60" Long Handle, Make cleaning easier..
• You need a PVA sponge mop – All floor mops for cleaning will leave a lot of water stains, only the PVA sponge mop can absorb 80-90% of water. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
• SUPER ABSORBENT – Picks up over 5 times more liquid than a regular mop and locks it in place so it doesn’t drip. Instead of pushing water around like a regular mop, the PVA mop cleans, absorbs and dries all at once. It is especially suitable for kitchen, toilet, bathroom and other tile floors. Every home needed a PVA sponge mop..
• A UNIQUE PHENOMENON – The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional and sponge mops. When you need to use it again, just soak it in water for a while and it will be restored. Wring out only when the sponge head is completely soft and wet and fully absorbed with water..

The Super® Standard 11' Double Roller PVA Sponge Mop Set (Mop and 1 Extra Refill)

• The Super Standard 11" Double Roller PVA Sponge Mop Set.
• Includes PVA Mop, Extra PVA Mop Refill, and Telescopic Handle.
• 100% Pure PVA Sponge in Patented Non-Slip Gripper.
• Robust Handle - Used Commercially by Janitors, Veterinarians, and Restaurants.
• Picks Up Pet Hair, Dust, and Liquid Like a Magnet - Doesn't Drip!.

KODAK PLA Filament 1.75mm for 3D Printer, Black, Dimensional Accuracy +/- 0.02mm, 750g Spool (1.7lbs), PLA Filament 1.75 Used as 3D Printer Filament to Refill Most FDM Printers

• EXTRA-DRY: vacuum resealable ziploc bag with silica gel to protect filament from humidity and dust..
• STRONGEST: premium filament with high tensile strength for extremely robust and heavy duty components..
• PREMIUM: PVA 3D printing filament engineered for reliable and easy 3D printing..
• COMPATIBLE: 3D PVA dissolving filament for most open material 3D printers..
• ONLINE SUPPORT: We're here to help! Contact us or visit our support center. Satisfaction !.

eSUN Water Soluble PVA Filament 1.75mm, 3D Printer Filament PVA, 0.5KG Spool 3D Printing Filament for 3D Printers, Natural

• 【Water Soluble PVA】Water-soluble Polymer. Excellent Water Solubility. Easy to Peel off, Will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!.
• 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, no bubbles, extremely high successful rate, resulting in an outstanding surface finish and are highly precise..
• 【Tangle Free & No Plugging】Full 0.5KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder..
• 【Support Material】Thanks to its solubility in water, makes it possible to print complex models and mobile constructions that no longer need to be assembled from individual parts. Simply wash away the support structure by immersing the model in water..
• 【Vacuumed Sealed Packaging】0.5KG Spool Water Soluble PVA Filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging..

KODAK PLA PLUS Filament 1.75mm for 3D Printer, Black PLA PLUS, Dimensional Accuracy +/- 0.02mm, 750g Spool (1.7lbs), 1.75 PLA Filament used as 3D Printing Filament to refill most FDM Printers

• EXTRA-DRY: vacuum resealable bag with silica gel to protect filament from humidity and dust..
• SUPPORT MATERIAL: Support filament for PLA 3D printing filament..
• PREMIUM: PVA 3D printing filament engineered for reliable and easy 3D printing..
• COMPATIBLE: 3D PVA fits most open material 3D printers..
• ONLINE SUPPORT: We're here to help! Contact us or visit our support center. Satisfaction guaranteed!.