The Super® Standard 11' Double Roller PVA Sponge Mop Set (Mop and 1 Extra Refill)

  • The Super Standard 11" Double Roller PVA Sponge Mop Set.
  • Includes PVA Mop, Extra PVA Mop Refill, and Telescopic Handle.
  • 100% Pure PVA Sponge in Patented Non-Slip Gripper.
  • Robust Handle - Used Commercially by Janitors, Veterinarians, and Restaurants.
  • Picks Up Pet Hair, Dust, and Liquid Like a Magnet - Doesn't Drip!.
Check Stock

3D Printlife E PVA: Enhanced PVA, 1.75mm Natural, Water Soluble Support 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm (500g)

  • Enhanced PVA formulation with improved stability for 3D printing.
  • Bonds well with PLA, ABS, and PETG with excellent water solubility, even in cold water.
  • Much greater thermal stability than standard PVA.
  • Perfect support for prints with large overhangs or complex internal geometries.
  • Do not exceed a printing temperature of 225˚C or E PVA will crystallize too quickly and will no longer flow and/or dissolve in water..
  • Store in a resealable bag with desiccant between 0°C and 30°C, away from UV light, and we recommend the relative humidity stay below 50%..
  • Difficulty: Advanced. Please note that all PVA's are very sensitive to moisture and humidity. E PVA comes vacuum sealed but we strongly recommend using a filament dryer before removing from storage after initial use..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against surface hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

New PVA Mop and Bucket with Wringer Set for Floor Cleaning, Super Quick Dry, Hands Free Squeeze Sweeper Sponge Mop with Extra PVA Head (1 Year use) for Hardwood Laminated Tile Floor Mop.

  • HANDS-FREE SELF-WRINGING SYSTEM – This mop comes with a bucket that can clean the mop in a second. It also squeezes the mop in a second. When you knock over a lot of water, he can easily recycle the water. This PVA mop can also be used outdoors..
  • GREAT PVA SPONGE - The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional sponge mops. When you need to use it again, just soak it in water for a little while and it will be restored..
  • YOU NEED A PVA SPONGE MOP – All mops wet the floor when they are finished, only the PVA sponge mop can soak up all the moisture. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
  • COMPACT FOR EASY STORAGE: This sponge mop bucket is perfect for small apartment. Small bucket but as it uses water effective, can do big areas. All pieces are compact enough to fit effortlessly inside the bucket. When you don't use it, just put your household cleaning tools in the corner and never wor....
Check Stock

Champion Chamois Shammy Towel for Car Boat or Home - 26 x 17 - Ultimate Drying Chamois 1 Chamois Natural

  • SUPER ABSORPTION - The Champion Chamois car cloth completely dries surfaces without leaving swirl or lint marks. It quickly absorbs and retains large....
  • MULTI-PURPOSE CAR TOWEL - Our shammy cloths aren't just limited to cars, boats and trucks. They're perfect for your home or office too. Whether....
  • ULTIMATE CAR WASH TOWEL - These car shams from Champion Chamois have wide pores that absorb huge amounts, but don't trap particles like a traditional....
  • HIGH QUALITY CLEANING CLOTH - Made from premium synthetic PVA material, our drying towels for cars, trucks and RVs are soft but tough. They ring....
  • VEGAN ALTERNATIVE - Our shammies are made with a synthetic PVA material, not hide based animal leather. You can trust that our products are animal....
Check Stock

PVA Professional Double Roller Ultra Foam Rubber Mop Head Replacement (3x)

  • Polyvinyl alcohol (PVA) sponge mop head is highly absorbent and durable.
  • Horizontal grooves are specially designed to lift dirt off floors, windows and other surfaces.
  • The Super, Magical, Sweep 'N Mop, Quickee, and Wilen 11" PVA mops..
  • PVA UNIVERSAL HEAD For use on any standard 11" sponge mop handle. Note May not fit CLOROX MOP.
  • Includes Set of 3 sponge mop head - Handle AND mounting screws not included.
Check Stock

SainSmart 1.75mm PVA Dissolvable 3D Printers Filament, Upgrade Water Soluble Support Filament for 3D Printers -0.5kg/1.1lbs (Natural), Dimensional Accuracy +/- 0.05mm

  • Faster Dissolution Rate: PVA filament begins to dissolve after 1-2 minutes in water at 50°C..
  • Creative Freedom: Sainsmart PVA filament provides stable support to complex designs, even those with features like cavities, and intricate internal details..
  • Compatible with PLA: PVA is used in conjunction with PLA not ABS because it adheres well to PLA. The extrusion temperature difference can also be problematic with ABS..
  • Printing Setting: Recommended Extrusion/Nozzle Temperature 190ºC- 210ºC (212ºF - 410ºF).
  • Recommended bed Temperature 60ºC- 80ºC (140ºF - 176ºF)..
  • Package: PVA 3D Printer Filament Vacuumed Sealed With Desiccant..
Check Stock

Fused Materials PVA 3D Printer Filament, 1.75mm, 0.5kg roll

  • An Innovative Material - Fused Materials PVA is a water soluble filament used with dual extruder 3D printers to print support structures.
  • Consistent Diameter - +/- .03mm dimensional accuracy.
  • Optimized for PLA - PVA works with a variety of materials but it works best with PLA.
  • Low-print temperature - PVA work best at low-temperatures. Refer to the instructions on the box!.
  • Works on all major dual extruder 3D printer brands.
Check Stock

Evaporative Cooling Vest for Women Men Cool Vest Heatstroke Prevention Body Cool Down Cold Vest for Hot WeatherEvaporative Cooling Vest for Women Men Cool Vest Heatstroke Prevention Body Cool Down Cold Vest for Hot Weather (Blue)

  • 【PVA evaporative cooling material】 Evaporative cooling vest using the latest high-quality PVA synthetic fabric,skin-friendly and comfortable,accelerate sweat discharge,decrease body surface temperature quickly..
  • 【Strong water absorption】 PVA material has strong water absorption,after soaking in the water, immediately lock the water,combination of moisture and PVA material,gentle release of water vapor,cool vest bring you lasting cool..
  • 【Long duration】Almost whole body PVA evaporative cooling material,and possess strong water absorption characteristics,body cooling vest can be used for 6-8 hours,stay cool while you are working non-stop,keep cool to avoid heat stroke..
  • 【Method of use】 Use normal temperature tap water soak for 1-3 minutes,let the cold vest fully absorb water,wring out the water and can use it.Zero chemical,physical cooling,can be reused many times..
  • 【Application】 Applicable to the vast majority of places.Outdoor,kitchen,running,fishing,mountain,climbing,cycling and more,ice cooling vest keep you cool at work,cool down quickly and heatstroke prevention..
Check Stock

Rogue River Tools Rotary Drill Boat Hull Cleaning Brush

  • ULTRA ABSORBENT QUICK DRY TOWEL: Our highly absorbent towel is made from sponge-like synthetic chamois PVA material that sucks up and holds onto water, drying surfaces faster than cloth towels. The ultimate chamois towel & drying towels for cars..
  • USE FOR ALMOST ANYTHING: Use as a car shammy towel drying, PVA cooling towel, swim towel, boat shammy ,boat towel, chamois cloth for car. Leaves your boat, car or RV interior and exterior spotless! The ultimate in personal use & car washing supplies.
  • SUPER SOFT, LINT-FREE & SCRATCH-FREE: This synthetic chamois towel is ultra-gentle making it a highly versatile and a safe absorber drying cloth for various surfaces. Will never scratch or scuff, leave behind streaks, lint, water-marks or residue..
  • STRONG & DURABLE: Premium quality multi-purpose absorber towel is durable, long-lasting, machine washable, animal cruelty-free and vegan. Use this shammy towel for cleaning and watch it suck up like a sponge. Simply wring it out and keep absorbing..
  • WHY BETTER BOAT: Join over 500,000 Happy Customers. A family owned American business committed to making premium quality boating, auto and RV supplies. We stand behind your satisfaction and our products including our synthetic absorber shammy..
Check Stock