Categories

Best Pva Puffs

3D Printlife E PVA: Enhanced PVA, 1.75mm Natural, Water Soluble Support 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm (500g)

  • Enhanced PVA formulation with improved stability for 3D printing.
  • Bonds well with PLA, ABS, and PETG with excellent water solubility, even in cold water.
  • Much greater thermal stability than standard PVA.
  • Perfect support for prints with large overhangs or complex internal geometries.
  • Do not exceed a printing temperature of 225˚C or E PVA will crystallize too quickly and will no longer flow and/or dissolve in water..
  • Store in a resealable bag with desiccant between 0°C and 30°C, away from UV light, and we recommend the relative humidity stay below 50%..
  • Difficulty: Advanced. Please note that all PVA's are very sensitive to moisture and humidity. E PVA comes vacuum sealed but we strongly recommend using a filament dryer before removing from storage after initial use..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against surface hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

New PVA Mop and Bucket with Wringer Set for Floor Cleaning, Super Quick Dry, Hands Free Squeeze Sweeper Sponge Mop with Extra PVA Head (1 Year use) for Hardwood Laminated Tile Floor Mop.

  • HANDS-FREE SELF-WRINGING SYSTEM – This mop comes with a bucket that can clean the mop in a second. It also squeezes the mop in a second. When you knock over a lot of water, he can easily recycle the water. This PVA mop can also be used outdoors..
  • GREAT PVA SPONGE - The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional sponge mops. When you need to use it again, just soak it in water for a little while and it will be restored..
  • YOU NEED A PVA SPONGE MOP – All mops wet the floor when they are finished, only the PVA sponge mop can soak up all the moisture. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
  • COMPACT FOR EASY STORAGE: This sponge mop bucket is perfect for small apartment. Small bucket but as it uses water effective, can do big areas. All pieces are compact enough to fit effortlessly inside the bucket. When you don't use it, just put your household cleaning tools in the corner and never wor....
Check Stock

Smart for Life Soy Protein Puffs from Edamame - High Protein Zero Sugar Soy Protein Isolate Puffs - 20 Grams Protein Snacks - Non-GMO, Gluten-Free - 3 Pound Box - 53 Servings - Soy Puffs

  • ADD SOME CRUNCH: Skip the protein powder and go straight for the crunch with these soy protein puffs. Just mix them into your cereal, marshmallow rice crispy treats, smoothie or yogurt for an extra boost of delightfully crunchy protein. Unflavored and unsweetened, these low carb protein puffs are easy to incorporate into your diet and won’t give you that weird aftertaste like most flavored protein supplements have..
  • KETO PROTEIN PUFFS: These crunchy vegan puffs provide the optimum nutrition of high quality ingredients for supplementing your keto diet. Containing 24 g of protein and only 2 g of carbs per serving, these protein puffs are a great protein source for people following low carb diets. Sugar free and only 100 calories per serving, these protein puffs are a great low calorie option for better weight management..
  • LOW CARB SNACKS: These edamame puffs are the perfect "on the go" high protein snacks to supplement your daily workouts. Forget the hassle and chore of boring protein powders. With Smart For Life’s Soy Protein Puffs, you can just grab and go for a fun, fast and satisfying pre or post workout boost specially if your tired of the same old soy snacks..
  • FOR OPTIMAL GAINS: A complete protein, soy protein not only tastes great but is chock ....
Check Stock

PVA Professional Double Roller Ultra Foam Rubber Mop Head Replacement (3x)

  • Polyvinyl alcohol (PVA) sponge mop head is highly absorbent and durable.
  • Horizontal grooves are specially designed to lift dirt off floors, windows and other surfaces.
  • The Super, Magical, Sweep 'N Mop, Quickee, and Wilen 11" PVA mops..
  • PVA UNIVERSAL HEAD For use on any standard 11" sponge mop handle. Note May not fit CLOROX MOP.
  • Includes Set of 3 sponge mop head - Handle AND mounting screws not included.
Check Stock

SainSmart 1.75mm PVA Dissolvable 3D Printers Filament, Upgrade Water Soluble Support Filament for 3D Printers -0.5kg/1.1lbs (Natural), Dimensional Accuracy +/- 0.05mm

  • Faster Dissolution Rate: PVA filament begins to dissolve after 1-2 minutes in water at 50°C..
  • Creative Freedom: Sainsmart PVA filament provides stable support to complex designs, even those with features like cavities, and intricate internal details..
  • Compatible with PLA: PVA is used in conjunction with PLA not ABS because it adheres well to PLA. The extrusion temperature difference can also be problematic with ABS..
  • Printing Setting: Recommended Extrusion/Nozzle Temperature 190ºC- 210ºC (212ºF - 410ºF).
  • Recommended bed Temperature 60ºC- 80ºC (140ºF - 176ºF)..
  • Package: PVA 3D Printer Filament Vacuumed Sealed With Desiccant..
Check Stock

Fused Materials PVA 3D Printer Filament, 1.75mm, 0.5kg roll

  • An Innovative Material - Fused Materials PVA is a water soluble filament used with dual extruder 3D printers to print support structures.
  • Consistent Diameter - +/- .03mm dimensional accuracy.
  • Optimized for PLA - PVA works with a variety of materials but it works best with PLA.
  • Low-print temperature - PVA work best at low-temperatures. Refer to the instructions on the box!.
  • Works on all major dual extruder 3D printer brands.
Check Stock

WW Daily Essentials 30 Packs Per Box

  • GRAIN FREE PUFFS Six 1.5oz containers of Various Grain Free Puffs with Olive Oil - a new snacking addition to the Serenity kids line up!.
  • PERFECT SAVORY BLENDS Our puffs are savory, not sweet - made with ZERO grams of sugar!.
  • WHOLE FOOD INGREDIENTS Our puffs contain organic cassava root flour. Unlike most other puffs which contain mainly fillers like grains, rice or wheat....
  • OLIVE OIL FOR HEALTHY FATS Organic Olive Oil for healthy fats, and organic dehydrated carrot, beet, sweet potato, rosemary, and ginger for a delicious....
  • FAMILY OWNED COMPANY We're for you and your little one! If you have any questions, concerns or feedback, please reach out to us!.
Check Stock

Puffs Plus Lotion Facial Tissue, 8 Family Boxes, 124 Facial Tissues per Box

  • Pack includes 8 Family Boxes (120 Tissues per Box) of Puffs Plus Lotion Facial Tissues.
  • Puffs softest, most cushiony tissue, with a touch of lotion, to help protect your nose.
  • Puffs Plus Lotion helps soothe irritated noses by locking in moisture better than regular tissues.
  • Don't let your runny nose run out of Puffs. Sign up for automatic home delivery and save.
  • Dermatologist tested to be gentle on sensitive skin.
  • Don't irritate your nose during cold & flu.
  • be ready with soothing Puffs Plus Lotion.
Check Stock

Puffs Plus Lotion Facial Tissues, 10 Cubes, 52 Tissues Per Box (520 Tissues Total)

  • Pack includes 10 Cubes (52 Tissues per Cube) of Puffs Plus Lotion Facial Tissues.
  • Puffs softest, most cushiony tissue, with a touch of lotion, to help protect your nose.
  • Puffs Plus Lotion helps soothe irritated noses by locking in moisture better than regular tissues.
  • Don't let your runny nose run out of Puffs. Sign up for automatic home delivery and save.
  • Dermatologist tested to be gentle on sensitive skin.
  • Don't irritate your nose during cold & flu.
  • be ready with soothing Puffs Plus Lotion.
Check Stock