Categories

Best Pva Replacement Roller

Tourna-Dri Tennis Court PVA Squeegee

  • Removes water from tennis courts quickly to speed up the drying process. Get rolling and start playing!.
  • PVA roller works better when wet so it eliminates the need to press down on the unit with excessive force to roll away water..
  • PVA rollers are more durable than foam rollers which fall apart quickly..
  • Aluminum handle is extra durable and lightweight.
  • Contains a built in hook to hang on a fence.
Check Stock

6 Inch Portable Glue Applicator Roller with Paint Bucket Handheld Manual Adhesive Glue Spreader with 2 Foam Wheels for Carpenter Woodworking, 10.5oz(320ml)

  • ...foam but it cleans easily. you can drop it in a bucket of water to keep the glue from hardening before you clean it. rinsing under water while squeezing glue out is all that is needed to clean..
  • What You Will Get - 1pc glue applicator roller, 2pc of foam roller wheel(1 installed on the machine already and 1 for replacement). You order comes with two rollers. Product is really good value compared to $250 models..
Check Stock

ZNM Sponge Mop, Self Wringing Sponge Mops for Floor Cleaning Squeeze, PVA Mop with 3 Absorbent Sponge Heads for Hardwood Tile Marble Laminate

  • ... mop head and keeping your hands clean..
  • 【Super Absorbent】The sponge mop head is made of high-quality PVA sponge, catching water stains on the ground efficiently and the special groove design traps hair, debris and easily removes stubborn stains. Note: Soak the squeeze roller mop head in water for 5-6 minutes before use..
  • 【Deep Cleaning】The roller mop is perfect for wet and dry use, which provides deep cleaning for you. The squeeze mop is suitable for most floor surfaces, including tile, hardwood, laminate, marble, glass, etc..
  • 【3 Sponge Head Refills】The sponge mops for floor cleaning can be easily removed and installed. You can regularly clean the sponge mop heads to keep them in optimal cleaning condition. The 3 PVA sponge mop heads save money for you..
  • 【Adjustable Mop Handle】The adjustable stainless steel mop handle with a total length of 50.4 inches (128 cm), allowing you to use the sponge floor mop without bending over to protect your back. The hanging hole on the self wring sponge mop can be hung to dry and is convenient for storage..
Check Stock

New PVA Mop and Bucket with Wringer Set for Floor Cleaning, Super Quick Dry, Hands Free Squeeze Sweeper Sponge Mop with Extra PVA Head (1 Year use) for Hardwood Laminated Tile Floor Mop.

  • ...e the bucket. When you don't use it, just put your household cleaning tools in the corner and never worry about taking up too much space..
  • SAVE MORE MONEY – The 13" PVA Sponge Heads were 2" more than the other mop, making it a more efficient mop. The material is PVA and easier to clean can last 6-12 months without replacement, saving you the cost of buying more mop pads..
Check Stock

The Super® Jumbo 16' PVA Sponge Mop Set (Mop and 1 Extra Refill)

  • The Super Jumbo 16" PVA Sponge Mop Set - World's Largest PVA Mop.
  • Includes PVA Mop, Extra PVA Mop Refill, and Telescopic Handle.
  • 100% Pure PVA Sponge in Patented Non-Slip Gripper.
  • Robust Handle - Used Commercially by Janitors, Veterinarians, and Restaurants.
  • Picks Up Pet Hair, Dust, and Liquid Like a Magnet - Doesn't Drip!.
Check Stock

PVA Filament, Water Soluble Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers, Natural

  • 【Attention Please】This filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water. Therefore, this PVA filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-60°C to achieve the purpose of easily removing the support. If you want PVA filament that is completely soluble in water, please do not buy this product. If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice..
  • 【Water Soluble PVA】Water-soluble Polymer. Not completely dissolved, but softening and layering,then peel off with your hands. It will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!.
  • 【HIGH PERFORMANCE】 With even tight winding, clog-free and bubble-free, always maintain a smooth feeding during printing, effectively reduce unexpected printing interruptions. Enjoy design and bring to life your inventions..
Check Stock

PVA Sponge Mops for Floor Cleaning Squeeze with 60" Long Handle, Self Wringing Mop with 15" Head for Kitchen Bathroom Tiles, Sponge Mops for Floor Cleaning with Wringer DUDTO

  • Large size PVA mop – 15" PVA sponge mop Head and 60" Long Handle, Make cleaning easier..
  • You need a PVA sponge mop – All floor mops for cleaning will leave a lot of water stains, only the PVA sponge mop can absorb 80-90% of water. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
  • SUPER ABSORBENT – Picks up over 5 times more liquid than a regular mop and locks it in place so it doesn’t drip. Instead of pushing water around like a regular mop, the PVA mop cleans, absorbs and dries all at once. It is especially suitable for kitchen, toilet, bathroom and other tile floors. Every home needed a PVA sponge mop..
  • A UNIQUE PHENOMENON – The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional and sponge mops. When you need to use it again, just soak it in water for a while and it will be restored. Wring out only when the sponge head is completely soft and wet and fully absorbed with water..
Check Stock

3D Printlife E PVA: Enhanced PVA, 1.75mm Natural, Water Soluble Support 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm (500g)

  • Enhanced PVA formulation with improved stability for 3D printing.
  • Bonds well with PLA, ABS, and PETG with excellent water solubility, even in cold water.
  • Much greater thermal stability than standard PVA.
  • Perfect support for prints with large overhangs or complex internal geometries.
  • Do not exceed a printing temperature of 225˚C or E PVA will crystallize too quickly and will no longer flow and/or dissolve in water..
  • Store in a resealable bag with desiccant between 0°C and 30°C, away from UV light, and we recommend the relative humidity stay below 50%..
  • Difficulty: Advanced. Please note that all PVA's are very sensitive to moisture and humidity. E PVA comes vacuum sealed but we strongly recommend using a filament dryer before removing from storage after initial use..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against surface hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

PAXCESS Wall-Climbing Automatic Pool Cleaner with Twin Large 180um Filter Basket,Tangle-Free Cord Up to 50 Feet,Robotic Pool Cleaner,Do Intelligent Cleaning,Suit for Above/In-ground Swimming Pool

  • 【Wall-Climbing Function】 PAXCESS automatic pool cleaner possesses 4pcs sponge roller brushes to provide powerful adsorption and excellent wall....
  • 【Provide A Deep Clean for Pool】Comparing to a similar robotic pool cleaner, PAXCESS pool cleaner possesses 4pcs PVA sponge roller brushes and 2pcs....
  • 【Plug and Play& Intelligent Efficient】Automatic swimming pool cleaner is the newest type of efficient automatic pool cleaning equipment. The pool....
  • 【Easy Filter Cleaning】With twin extra-large top access filter baskets,PAXCESS robotic pool cleaner not only traps leaves, dirt and fine debris but....
  • 【Best Gift for Parents】Paxcess pool cleaner provides pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Best....
Check Stock