Categories

Best Pva Sponges

4Pcs Bath Sponge, Ultra Soft Exfoliating Sponge Body Shower Reusable Exfoliate Dead Skin Remover, Super Soft Exfoliating Bath Sponge with 4 Sticky Hooks for Men, Women, Adult and Children

  • ...edients to keep the sponge moist to a certain extent, keeping away from drying and hardening during transportation, and make it softer and skin friendly to use without hurting the skin.
  • If you feel wet when you receive the product, this is normal.
  • Appropriate Size: 7*14*3cm, Fits for Children/ Kids. Our premium bath sponges are larger than ordinary ones to cover a larger body area and more efficient to use. It is soft-touch and full of elasticity, real painless exfoliation, revealing healthy and radiant skin.
  • Package Includes: what you will get are 4 pieces of bath sponges for shower in 4 different colors, white, gray, blue, pink, enough quantities can meet your daily using and replacing needs, or you can share them with your family members.
Check Stock

PVA Filament, Water Soluble Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers, Natural

  • 【Attention Please】This filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water. Therefore, this PVA filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-60°C to achieve the purpose of easily removing the support. If you want PVA filament that is completely soluble in water, please do not buy this product. If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice..
  • 【Water Soluble PVA】Water-soluble Polymer. Not completely dissolved, but softening and layering,then peel off with your hands. It will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!.
  • 【HIGH PERFORMANCE】 With even tight winding, clog-free and bubble-free, always maintain a smooth feeding during printing, effectively reduce unexpected printing interruptions. Enjoy design and bring to life your inventions..
Check Stock

PVA Sponge Mops for Floor Cleaning Squeeze with 60" Long Handle, Self Wringing Mop with 15" Head for Kitchen Bathroom Tiles, Sponge Mops for Floor Cleaning with Wringer DUDTO

  • Large size PVA mop – 15" PVA sponge mop Head and 60" Long Handle, Make cleaning easier..
  • You need a PVA sponge mop – All floor mops for cleaning will leave a lot of water stains, only the PVA sponge mop can absorb 80-90% of water. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
  • SUPER ABSORBENT – Picks up over 5 times more liquid than a regular mop and locks it in place so it doesn’t drip. Instead of pushing water around like a regular mop, the PVA mop cleans, absorbs and dries all at once. It is especially suitable for kitchen, toilet, bathroom and other tile floors. Every home needed a PVA sponge mop..
  • A UNIQUE PHENOMENON – The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional and sponge mops. When you need to use it again, just soak it in water for a while and it will be restored. Wring out only when the sponge head is completely soft and wet and fully absorbed with water..
Check Stock

The Super® Standard 11' Double Roller PVA Sponge Mop Set (Mop and 1 Extra Refill)

  • The Super Standard 11" Double Roller PVA Sponge Mop Set.
  • Includes PVA Mop, Extra PVA Mop Refill, and Telescopic Handle.
  • 100% Pure PVA Sponge in Patented Non-Slip Gripper.
  • Robust Handle - Used Commercially by Janitors, Veterinarians, and Restaurants.
  • Picks Up Pet Hair, Dust, and Liquid Like a Magnet - Doesn't Drip!.
Check Stock

3D Printlife E PVA: Enhanced PVA, 1.75mm Natural, Water Soluble Support 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm (500g)

  • Enhanced PVA formulation with improved stability for 3D printing.
  • Bonds well with PLA, ABS, and PETG with excellent water solubility, even in cold water.
  • Much greater thermal stability than standard PVA.
  • Perfect support for prints with large overhangs or complex internal geometries.
  • Do not exceed a printing temperature of 225˚C or E PVA will crystallize too quickly and will no longer flow and/or dissolve in water..
  • Store in a resealable bag with desiccant between 0°C and 30°C, away from UV light, and we recommend the relative humidity stay below 50%..
  • Difficulty: Advanced. Please note that all PVA's are very sensitive to moisture and humidity. E PVA comes vacuum sealed but we strongly recommend using a filament dryer before removing from storage after initial use..
Check Stock

BZG 2Pack exfoliating Bath Sponge,Bath sponges for Shower,Bath sponges for Women,Shower Sponge, Pink Grey 2 Count (Pack of 1)

  • 【Quick Exfoliation without Body Wash】Very soft 3d exfoliating bath body shower sponge deep quick exfoliation to clean dead skin and dirt, no body wash is needed, no chemicals, no irritation or damage to the skin.The bath sponge will also take care of the skin and exfoliate.Keep you and your family skin healthy..
  • 【Super Large Size】The bath body shower sponge size is 5.5 * 2.8 * 1.2in/7*14*3cm, fits for all people. our premium bath sponges are larger than ordinary ones to cover a larger body area and more efficient to use..
  • 【High Quality】Made with soft PVA material.Durable Bath Sponge:The exfoliating bath sponge can be repeatedly used. The bath sponge will become soft after soaking when exposed to water and it will harden after drying. We suggest you rinse the bath sponge completely and hang to dry after every use to keep it clean..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against surface hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

New PVA Mop and Bucket with Wringer Set for Floor Cleaning, Super Quick Dry, Hands Free Squeeze Sweeper Sponge Mop with Extra PVA Head (1 Year use) for Hardwood Laminated Tile Floor Mop.

  • HANDS-FREE SELF-WRINGING SYSTEM – This mop comes with a bucket that can clean the mop in a second. It also squeezes the mop in a second. When you knock over a lot of water, he can easily recycle the water. This PVA mop can also be used outdoors..
  • GREAT PVA SPONGE - The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional sponge mops. When you need to use it again, just soak it in water for a little while and it will be restored..
  • YOU NEED A PVA SPONGE MOP – All mops wet the floor when they are finished, only the PVA sponge mop can soak up all the moisture. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
  • COMPACT FOR EASY STORAGE: This sponge mop bucket is perfect for small apartment. Small bucket but as it uses water effective, can do big areas. All pieces are compact enough to fit effortlessly inside the bucket. When you don't use it, just put your household cleaning tools in the corner and never wor....
Check Stock

PVA Professional Double Roller Ultra Foam Rubber Mop Head Replacement (3x)

  • Polyvinyl alcohol (PVA) sponge mop head is highly absorbent and durable.
  • Horizontal grooves are specially designed to lift dirt off floors, windows and other surfaces.
  • The Super, Magical, Sweep 'N Mop, Quickee, and Wilen 11" PVA mops..
  • PVA UNIVERSAL HEAD For use on any standard 11" sponge mop handle. Note May not fit CLOROX MOP.
  • Includes Set of 3 sponge mop head - Handle AND mounting screws not included.
Check Stock

SainSmart 1.75mm PVA Dissolvable 3D Printers Filament, Upgrade Water Soluble Support Filament for 3D Printers -0.5kg/1.1lbs (Natural), Dimensional Accuracy +/- 0.05mm

  • Faster Dissolution Rate: PVA filament begins to dissolve after 1-2 minutes in water at 50°C..
  • Creative Freedom: Sainsmart PVA filament provides stable support to complex designs, even those with features like cavities, and intricate internal details..
  • Compatible with PLA: PVA is used in conjunction with PLA not ABS because it adheres well to PLA. The extrusion temperature difference can also be problematic with ABS..
  • Printing Setting: Recommended Extrusion/Nozzle Temperature 190ºC- 210ºC (212ºF - 410ºF).
  • Recommended bed Temperature 60ºC- 80ºC (140ºF - 176ºF)..
  • Package: PVA 3D Printer Filament Vacuumed Sealed With Desiccant..
Check Stock