Categories

Best Pvc Cable Pipes

WRAP-ON Pipe Heating Cable - 60-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31060

  • BUILT-IN THERMOSTAT – Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F – Simply wrap on, insulate and plug in. Insulation sold separately..
  • PRESS-TO-TEST BUTTON – Exclusive feature to test cable before or after installation..
  • ENERGY EFFICIENT – Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot..
  • USE ON ALL RIGID PIPES – PVC, CPVC, copper and metal pipes..
Check Stock

WRAP-ON Pipe Heating Cable - 3-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31003

  • BUILT-IN THERMOSTAT – Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F – Simply wrap on, insulate and plug in. Insulation sold separately..
  • PRESS-TO-TEST BUTTON – Exclusive feature to test cable before or after installation..
  • ENERGY EFFICIENT – Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot..
  • USE ON ALL RIGID PIPES – PVC, CPVC, copper and metal pipes..
Check Stock

HEATIT HISD 18-feet Pipe Heating Cable with Built-in Thermostat

  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues..
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When t....
Check Stock

HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat

  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues..
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When t....
Check Stock

HEATIT HISD 12-feet Pipe Heating with Built-in Thermostat, Black

  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues..
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable in....
Check Stock

HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black

  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues..
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable in....
Check Stock

Electric Water Pipe Heating Cable with Thermostat for Pipe Freeze Protection, 6ft 120V Snow De-Icing Cable with Build in Thermostat, Pipe Warmer, Heat Pipe Tape - CSA/ETL Listed

  • ✅ 003cb003e[100% Money-Back Guarantee] 003c/b003e--Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Buy with confidence!.
  • ✅ [High quality]--UL, ETL and CSA certified,more safer to use.Industrial grade heat shrinkage tube for connection.Each Cable consists of tough XLPE inner insulation, AL foil, a continuous ground braid as well as weather and non-supportive climatic conditions resistant PVC (high-low temperature) outer coating. Can convert 100% of electrical energy into heat without energy loss..
  • ✅ [Note]--Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material..
  • ✅ [Application]--Suitable for use on water filled plastic ((including PEX)and metal water pipes(including copper, galvanized, ABS plastic, PVC plastic pipes, etc).Not use for empty water pipes, fuel lines, hoses, gutters, steam lines and so on.Keeps water flowing down to -40℃..
Check Stock

DEWENWILS Roof Heat Cable, 6ft Heat Tape for Pipe, Gutter, Roof, Self-Regulating Cable Pre-Assembled, UL Listed

  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two-year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service at any time, we'll try our best to solve your issues..
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37....
Check Stock

Qmark WHT500 Utility Heater for Use in Well Houses, Utility Rooms, and Areas with Pipes and Machinery, 500 Watt, 240 Volt, Beige

  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two-year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service at any time, we'll try our best to solve your issues..
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37....
Check Stock

Libraton Pex Cutter 1-1/4\

  • 【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
  • 【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
  • 【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
  • 【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..
Check Stock

General Tools PVC Pipe Cable Saw #858-24-Inch - Serrated and Cuts PVC, PE, and ABS Pipes - Hand Tools

  • DURABLE STAINLESS STEEL WIRE: Cutting pipes has never been easier. This serrated cutting cable slices through pipe up to 8” in diameter like a breeze. It makes clean cuts in PVC, PE, ABS pipes, flexible rubber, and Polyethylene tubing..
  • COMFORT GRIP HANDLES: Fabricated from stainless steel for solid and smooth cuts. This hand saw features an ergonomically designed handle for a comfortable grip that provides leverage when cutting pipe, allowing for ease of motion and control..
  • WORKS IN CONFINED SPACES: Ideal for HVAC technicians and contractors who need to get into tight spaces and challenging areas to reach. The cable wire works with pipes against walls, rafters, or where a standard cutter or hacksaw will not fit..
  • VERSATILE DESIGN: If you have a job that requires different size pipes, this is the tool for you. It cuts a variety of pipe sizes and doesn't require any special adjustments. Add this folding saw to your accessories and equipment essentials..
  • GENERAL TOOLS: We have been a recognized leader in the innovation, design, and development of specialized precision tools for many years. We encourage craftspeople, artisans, and DIYers to work smarter, measure better, and increase productivity..
Check Stock

DEWENWILS Roof Heat Cable, 18ft Heat Tape for Pipe, Gutter, Roof, Self-Regulating Cable Pre-Assembled, UL Listed

  • Designed for water filled plastic (including PEX) and metal supply pipes only. Do not use on drain lines, fuel lines, hoses, empty water pipes, steam lines or gutters. Three year limited warranty. If you have any question about the product, please contact us and we will try our best to help you..
  • Quick and easy to install. Minimum pipe length is 3 feet. Cable will be applied straight along the pipe, and will protect pipe from 3/8" to 1 1/2" in diameter..
  • Save energy. 120 Volt, 7 watts/ft. 2 ft 18/3 cold lead with plug.The build-in thermostat automatically turns the heating cable on below 42.8° F (6° C) and off above 55.4° F (13 ° C)..
  • UL approved. Durable polyurethane as inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Never allow heating cable to touch, acorss , spiral or overlap itself at any point..
  • Testing the cable before installation. Uncoil the cable, plug in the cable. Wrap a bag of ice around the thermostat. The thermostat will turn the cable on when the temperature below 42.8° F. Wait about 20 minutes. The cable should now feel warm to touch. Then turn it off..
Check Stock

RIDGID 64263 Model K9-102 FlexShaft Drain Cleaning Machine Kit for 1-1/4'-2' Pipes

  • DRAIN CLEANING KIT: Includes a FlexShaft K9-102 Drain Cleaning Machine, cable, 2 chain knockers, a bottle of lubricant, 4 set screws, 2 pvc wall pipes, 12" of additional sheath, a RIDGID accessory bag, and an operator's manual.
  • K9-102 FLEXSHAFT MACHINE: Smaller lightweight version of the FlexShaft machine that offers a fast setup and cleanup, quick cleaning, and cordless convenience.
  • COMPACT AND POWERFUL: Tiny enough to fit into cramped spaces, yet strong enough to clear even the toughest of soft blockages, providing reliable power and easy transportation and storage.
  • HIGH-QUALITY CABLE: Comes with 50 ft. of 1/4-in. cable enclosed in durable nylon sheath and can be used on 1-1/4-in. to 2-in. pipes.
  • SUPERIOR FEATURES: Chain knockers expand for wall-to-wall full pipe cleaning, and the machine allows you to keep your camera in-pipe so you can simultaneously inspect as you clean. Choose from a whole line of accessories to clean various obstructions.
Check Stock