PVC- 4 way L/T 2' (Furniture Grade White)
- DO NOT use these fittings for plumbing projects..
- The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
- All four outlets are non-threaded sockets.
- 2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
- Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock1-1/2" 4-way Tee PVC Fitting Connector
- Furniture Grade means this fitting has a non-marked, glossy finish..
- DO NOT use these fittings for plumbing projects..
- The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
- 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
- All four outlets are non-threaded sockets.
Check StockPVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting
- TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
- MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
- WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
- EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
- MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.
Check StockSDTC Tech 1/2
- FEATURE: Structural PVC Elbow Fitting has tapered edges and glossy surface, nice for display items such as DIY furnitures..
- PVC CONNECTORS: 3 Way and 4 Way Heavy Duty PVC Pipe Elbow Fitting Kit, ideal for edge, corner and center connections, resistant to frost and corrosion, long service life..
- MATERIAL: High quality SCH 40 PVC Fittings, can withstand impacts or drop from a substantial height, and won’t suffer any cracks or breakage..
- SIZE: Fit 1/2 inch PVC pipe, PVC Connector for Center Connections, white finish with tapered sockets for a professional design..
- APPLICATION: Furniture-Grade Parts, suitable for build shelves, pool products, chairs, desks, storage frames, garden support structure etc..
Check StockletsFix PVC Elbow Fittings 1 1/4 Inch, 3-Way/4-Way/5-Way PVC Connectors for SCH40 1 1/4 Inch PVC Pipe - Build Heavy Duty PVC Furniture and Plumbing Projects Available, White [Pack of 4]
- 【Premium Quality】Made of high quality plastic material, the fitting is able to withstand impact, not easy to crack or break..
- 【PVC Fitting Size】This 5-Way PVC pipe fitting size is schedule 1 inch socket ,it's Ideal for Center Connections..
- 【Widely Use】This PVC Pipe adapter is use for agricultural irrigation, soilless cultivation systems, furniture, shelves, pool products, DIY shelves products, spa, potable water, and chilled water applications..
- 【Easy to Install】PVC is lightweight, easy to install, requires no special tools for cutting and is installed by solvent cementing..
- 【100% Promise】Replacement or full refund can be provided if you are not satisfied with our 5 way PVC fitting..
Check StockSharkBite 1/2, 3/4, 1 Inch PVC Disconnect Clip Set for Push to Connect Brass Plumbing Fittings, PVC IPS (Iron Pipe Size), UIP716A
- SHARKBITE PVC DISCONNECT CLIP: 1/2, 3/4, and 1 inch disconnect tools are used to perfectly release a SharkBite PVC fitting from any white collar iron pipe-sized fittings.
- can adjust or remove PVC SharkBite fittings in tight spaces for easy disassembly.
- COMPATIBILITY: These push-to-connect fitting disconnect tools can be used to release the white collar of a SharkBite PVC fitting from schedule 40, 80, or 120 PVC pipe and schedule 40 and 80 CPVC.
- ideal for marking proper safe seal insertion depth on a pipe for SharkBite fittings.
- DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
- SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in....
Check StockSKYFOOST 4 Pcs PVC Bulkhead Fitting, 3/4 Inch Male 1/2 Inch Female Water Tank Connector with Plugs, Bulkhead Tank Fitting with 2 Rubber Ring Stablizing for Rain Barrels, Aquariums, Water Tanks (4)
- PROFESSIONAL WATER TANK CONNECTOR: It's difficult to find a bulkhead fitting kit that works consistently well with a wide range of water tanks. Thankfully, this new 3/4 Inch Male 1/2 Inch Female bulkhead fitting with a thick silicone seal gasket will create a better tight seal. Quality bulkhead water fitting can be very convenient for your daily life..
- MORE EFFICIENT THAN OTHER WATER TANK CONNECTOR: Looking for the best bulkhead fitting? Our bulkhead fitting 3/4 inch is a must-have tool for breezy, rustic Irrigation work. This professional bulkhead fitting is robust, durable, and It even comes with a plug to help you seal the water tank. Each bulkhead fitting barbed quality PVC material, which is colorfast and durable, and lasts longer than ordinary plastic fittings, and comes with two thick silicone gaskets for better sealing performance..
- EASY INSTALLATION WATER TANK FITTINGS: Get outstanding results with our PVC bulkhead fittings. Each PVC bulkhead fittings tool takes the hassle out of the rain barrels, water tanks installation, and renovation. First, you need to drill a 25-26mm hole for installation and then assemble the Water Tank Connector and plug connector, ....
Check StockSmart Vac SMP500 Central Vacuum System Power Unit
- Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
- 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
- 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
- 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check StockCentral Vacuum Cleaner with Deluxe Accessory KIT-Set
- Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
- 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
- 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
- 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check StockOutus PVC Bulkhead Fitting Water Tank Connector for Rain Barrels, Aquariums, Ponds or Water Tanks (2 Inches)
- Product size: 2 inches PVC bulkhead fitting, measures approx. 52 mm x 108 mm.
- Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
- Please refer to the picture for the detailed size, and please make sure your barrel fits our product before purchasing.
- Function: locking nut is reversed threaded.
- The bulkhead fitting with 6 mm thick silicon seal gasket that will contour to the shape of the round barrels.
- Durable and longer lasting PVC versus standard plastic bulkhead fittings.
- Easy to install: requires 3 inch hole saw to install.
- Threaded from the front end, suitable for commercial and industrial use.
- What you get: 1 piece oversized PVC bulkhead fitting in your package, efficient to use it on your water tank.
Check StockJevrench 3/4 Inch PVC Bulkhead Fitting, Durable Threaded Bulkhead Water Tank Connector for Rain Barrels, Aquariums, Water Tanks, Tubs, Pools (3/4 Inch, 1PCS)
- ☘️BULKHEAD FITTING SIZE: bulkhead fitting is 3/4 inch FHT(refers to The bulkhead female thread size), connector size is 53x 47 mm/2.1 x 1.85 inch, The lock nut is reverse threaded with 4 mm thick silicone gasket that will adjust to the shape of the round barrel, the right size can meet most of your needs and they will work well..
- ☘️EASY TO INSTALL: The bulkhead fitting is easy to operate and quick to install, first drilling 1-1/2 inch holes in the tank for installation, assembling the bulkhead and hose adapter together, suitable for home, commercial and industrial use.
- ☘️STRONG AND DURABLE: The bulkhead fitting adapter is made of high quality PVC, which is colorfast and durable, and lasts longer than ordinary plastic fittings,and it comes with a clear silicone gasket for better sealing performance..
- ☘️ESSENTIAL TOOL: PVC Bulkhead Fitting fits most rain barrels, water tanks, ponds, or aquariums, it is durable and convenient..
- ☘️OUR SERVICE: We will always put customer satisfaction at the first. If there are any problems with our PVC bulkhead fitting, please contact us and we would be very happy to solve your problems..
Check Stock2 Inch Bulkhead Fitting - Water Tank Connector Double Threaded PVC Bulkhead Adapter with Plugs, Thick Silicone Seal Gasket Bulkhead , Fit for Rain Barrels, Aquariums, Tubs, Pools (1, 2inch)
- Size information:The size of the bulkhead fitting female thread size is 2 inch, equipped with 4 mm silicone gasket and 2 inch plug. please refer to our images for detailed size..
- Premium Material: Water tank connector adapter fittings made of high quality PVC material have high pressure resistance and will not fall off and cracking. Thick silicone gasket prevent water from leakage, long-lasting use..
- Easy to install: First drill 3 inch inch hole to install on the water tank, then assemble the PVC bulkhead and hose adaptor together. The bulkhead fitting is easy to operate..
- Multi-functional Adapters: PVC Bulkhead Fitting applicable for rain barrels, water tanks, ponds, and aquariums. suitable for home, A great way to keep fresh rain water and quickly empty the rain barrel..
- What you will get: you will get 1 pcs threaded bulkhead adapter and 1 pcs plug. If there are any problems with our PVC bulkhead fitting, please contact us and we would reply in 24 hours..
Check StockLOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert
- PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
- SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
- PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
- PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
- VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock