Categories

Best Pvc Heat Shrink Tube

TECHTONGDA Thermal Shrink Wrap Machine Heat Tunnel Packaging for POF PVC 16X8inch Shrink Size 220V Mesh Type

  • 【Application】The Thermal Shrink Wrap Machine is used to pack products with PVC/PE shrink wrap film. It is applicable to a variety of products, such as electronic products, cosmestics, glass bottles, books, etc..
  • 【Fast and even heating】The thermal shrink packaging machine adopts quartz farinfrared tube and is equipped with a fan inside the chamber to spread heat, heating fast and evenly..
  • 【16*8inch Shrink Size】The size of the inlet and outlet is 16*8inch. The max. shrink size is 16*8inch..
  • 【Intelligent and Safe】Intelligent control panel,with simple design,clear buttons and simple opeation. With leakage circuit breacker for safety..
  • 【Long Service Life】Heat emission holes in the machine dissipates the excess heat produced by the machine to extend the service life of the machine..
Check Stock

Aonomi Compatible Industrial Heat Shrink Tube Labels Replacement for DYMO 18053 Fit with DYMO Rhino 4200 5200 5000 6000 Industrial Label Maker Black on White 3/8 x 4.9 ,10-Pack

  • Compatible with DYMO Rhino Pro 1000, 3000, 4200, 5000, 5200, 6000, ILP-219, 3M PL100, PL200, PL300 and Tyco T107M label makers..
  • Size of Each Tape: 3/8 inch (9mm) wide, 4.9 feet (1.5m) long. The size indication for this Heat-Shrink Tube is the width of the flattened tube as a....
  • Made of industrial grade polyolefin offers a 3:1 heat shrink ratio make sure to fit on wires or cables and make heat-shrink tube labels indispensable....
  • Heat shrink tube offers an excellent method of labeling wires and cables: Fantastic custom heat shrink solution, print legibly and shrink up perfectly....
  • All heat-shrink tube labels offer the convenience of printing directly on the tubing itself with any Industrial labeling tool for high-end cable....
Check Stock

18650 Battery Wrap，1Pcs Bettomshin 10mx29.5mm(LxW) Battery Heat Shrink Tubing Orange Shrinkage Temperature 176°F & Rated Voltage 300V, DIY Battery Heat Shrink Wrap Tube

  • Shrink Temperature Range: -40℃ ~ 105℃..
  • Shrinking Rate: 48%(cross section)and 8%(longitudinal)..
  • PVC Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance..
  • Easy Use and Fast,You just use a heat gun heat it evenly until it wrap the wire or connector tightly..
Check Stock

TECHTONGDA Thermal Shrink Wrap Machine Heat Tunnel Packaging for PP POF PVC 12X6inch Shrink Size 220V Mesh Type

  • 【Application】The Thermal Shrink Wrap Machine is used to pack products with PVC/PP/PE shrink wrap film. It is applicable to a variety of products,....
  • 【Fast and even heating】The thermal shrink packaging machine adopts quartz farinfrared tube and is equipped with a fan inside the chamber to spread....
  • 【12*6inch Shrink Size】The size of the inlet and outlet is 12*6inch. The max. shrink size is 12*6inch..
  • 【Intelligent and Safe】Intelligent control panel,with simple design,clear buttons and simple opeation. With leakage circuit breacker for safety..
  • 【Long Service Life】Heat emission holes in the machine dissipates the excess heat produced by the machine to extend the service life of the....
Check Stock

Heat Shrink Tubing Kit,Mini Heat Gun + 328 PCS Heat Shrink Wrap Tube　2:1.

  • 328Pcs Heat Shrink Tube Shrinkage - It is 2:1 heat shrink ratio, and will shrink up to 1/2 of original, just use the mini heat gun heating for it 5 second..
  • High-quality heat gun: The hot air gun has two heat dissipation ports, and the service life can reach more than 5 years. 300W power is suitable for many DIY productions and can dissolve hot melt glue sticks and glue. Of course, it is definitely suitable for heat shrinkable tube..
  • Eight sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. First turn on this mini hot air gun switch,then glue inside will soften and seal the connection..
  • [Product parameters] Heat gun ：The length is 22 cm, which can produce high temperature of 200 degrees Celsius, and the US plug. Heat-shrink Tubing: 8 sizes, 5 colors, the sizes are 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm..
  • [Product warranty:] The heat gun can be used for five years. If it is broken under normal use, it will be replaced for free within five years. The heat shrinkable tube is RoHS compliant and free of formaldehyde. VETIN only produces safety products..
Check Stock

XHF 2 Inch 50mm 3 1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage 4 Ft Black

  • [Better protection]: double wall heat shrink tube and lined with glue can better act on the wrapped objects..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints,....
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion....
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to....
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

XHF 164 FT 1/4\ Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black

  • [Safety and environmental protection] XHF 2：1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [Good shrinkage performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

DIY Battery Pack PVC Heat Shrink Wrap Tube,Length 3M Flat Width 150±1MM for Big Battery Pack Power

  • 1.Heat Shrinkable Tubing Thicknessl is 0.15MM,Length is 3M..
  • 3.Warm Reminder :Battery Heat shrink Tubing Width is 150±1MM .So Pls calculate ur battery pack or mechine size exactly,IF not ,it will too big or small .coz I hope i dont waste ur time and hope u have a Happy Shopping..
  • 4.PVC Heat Shrink Tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics. When exposed to heat in excess of102 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly andȀ㯸Ȁ㯸 ⾯Ȁ䃸Ȁ䃸 クȀ磸Ȁ磸 ㆯȀ铸Ȁ铸 ㊯Ȁ꛸Ȁ꛸ ㎯Ȁ췸Ȁ췸 㒯Ȁ铹Ȁ铹 㖯Ȁ당Ȁ당 㚯Ȁ볹Ȁ볹 㞯Ȁ퓹Ȁ퓹 㢯 㢯.
  • 5.Shrinkable Plastic Tube Sleeve ,Applications include insulation and jacketing of batteries, capacitors and similar objects-a vast range of applications in the production of industrial equipment, toys, sporting goods, electronics, and consumer products..
Check Stock

XHF 164 FT 1/16' Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black

  • [Safety and environmental protection] XHF 2：1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

Pointool Heat Shrink Tubing Kit-Wire Shrink Wrap Tubing Wire Heat Shrink Tube Kit Insulation Electrical Colored Assorted Heat Shrink Tubing Assortment Electronics for Wires Shrink Ratio2 1,650Pcs

  • MULTIPLE SIZES AND COLORS-Contain any size you may need for anything from professional repair to DIY work at home, so the shrink tube is very convenient when working with different size wires. You may not use these wire shrink wraps a lot, but when you do, there's always a size that comes in handy. This heat shrink tubing kit affords wide variety of sizes and colors, especially the smaller size which hardest to find..
  • SHRINK QUICKLY, DURABLE and EVENLY-This shrink tube is well made of high quality material, thick and durable. Cover the area with them and shrinking them with a heat gun, then the wire shrink wraps will wrap the wire tight and evenly within 10 seconds. With this heat shrink tubing kit you will become more confident in your soldering work..
  • EASY TO USE-You can just shink the shrink tube with a lighter or hair dryer when you don't have a heat gun on hand. Of course, if you'd like to use the heat shrink tubing kit more professional, standard heat gun will be much better lol. The wire shrink wraps are all pre-cut into the most common sizes you'll need which makes your work a lot faster..
  • KEEP ORGANIZED-The heat shrink tubing comes in a nice compact case and the semi-modular container keeps each size separately. You can throw the heat shrink tu....
Check Stock

Wagner Spraytech 2417344 HT1000 Heat Gun Kit, 3 Nozzles Included, 2 Temp Settings 750ᵒF & 1000ᵒF, Great for Shrink Wrap, Soften Paint, Bend Plastic Pipes, Loosen Bolts and More

  • DUAL TEMP HEAT GUN: The HT1000 Heat Gun Kit offers a 750ᵒF and 1000ᵒF temperature setting to help complete household home improvement tasks or projects that require heat.
  • HEAT GUN FOR HOUSEHOLD PROJECTS: Use this electric heat gun to easily loosen rusted bolts, shrink heat shrink tube, remove flooring, thaw frozen pipes, shrink wrap, heat PVC, remove paint from furniture for paint removal, and more.
  • INCLUDES THREE NOZZLES ATTACHMENTS: The kit includes an edge protector nozzle for directing heat away from delicate surfaces. The flare nozzle distributes heat across a long, narrow area. The concentrator nozzle outputs heat in a small, focused area.
  • DURABLE WITH BUILT IN SAFETY: Features a corrosion resistant nozzle for long lasting use and has an integrated stand for safe, hands-free operation.
  • CUSTOMER CENTRIC: Wagner has been in the business for 50+ years and puts safety first and our products are ETL Listed (tested and approved by Intertek to UL and CSA Safety Standards). Have questions? Our U.S based customer service team is happy to help!.
Check Stock

XHF 1 Inch (25mm) 3:1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage, 4 Ft Black

  • [Better protection]: double wall heat shrink tube and lined with glue can better act on the wrapped objects..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to the original 1/3..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

200pcs 18650 Battery PVC Heat Shrink Wrap Tube (30mm) and 200pcs 18650 Battery Insulator Ring for 18650 Batterie Insulation Protection

  • Material: PVC Heat Shrinkable and Highland Barley Paper.
  • Size: PVC Heat Shrink Tube: Wide 30mm(1.18in) , Length 72mm(2.83in) , Thick 0.08mm.
  • Insulating Ring: Diameter 18mm, Inner Diameter 10mm Thick 0.2mm.
  • Shrinkage Rate: 48% (cross-section), 5% (longitudinal).
  • Advantages: Insulation Protection, Fast Shrinkage, Multiple Applications.
  • Application: Used for 18650 Lithium Battery DIY, Battery Refurbishment, and Enhanced Electrical Insulation..
Check Stock