Categories

Best Pvc Injection Machine

Dental Endodontic Obturation Endo System Gutta-percha Obturation Gun&Pen (White)

  • ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. ..
  • ★ The Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time..
  • ★ The Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists..
  • ★ The Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded..
  • ★ The Denture Injection Unit Consists of a Heater and a Hot Press. Heaters: Temperature Control, Timers and Electrical Systems. Hot Presses: Frames, Cylinders, Heaters, Brackets and Flasks..
Check Stock

ProTaper Race Line 2.0 Square Handlebar Pads - USA

  • The SX pad features an injection molded foam which offers better impact protection and significantly increases the life span.
  • Also improved is the fit on the cross brace which helps decrease movement during use.
  • High-density, injection molded foam to reduce rider injury.
  • Durable PVC cover with power-wash proof permanent graphics.
  • Velcro fastening and extremely lightweight.
Check Stock

Canplas 414463BC PVC Sew 3X4X4 Flush Down Spout Adaptor White

  • Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
  • Flame Retardant, will not support combustion in the absence of an ignition source.
  • Maximum Service Temperature Rated at (140F) +60C.
  • High chemical resistance to nearly all acids, alkalis, alcohols, halogens and other corrosive media.
  • Use approved PVC primer and solvent cement to make PVC Joints.
Check Stock

Camco 20750 Washing Machine Drain Pan with PVC Fitting 30-Inch x 32-Inch Graphite - Protects Your Floors from Washing Machine Leaks - Easy to Use

  • Protects your Floors: The drain pan sits under the washing machine, protecting your floor from leaks.
  • Includes: 1-inch/1 ½-inch PVC drain fitting, locknut and washer.
  • Pre-formed cut lines make installation easier. Bottom or side outlet, not pre cut.
  • Measurements: 30-inches x 32-inches (OD).
  • Construction: Constructed of injection molded, no break plastic.
  • Made in the USA: Product is made in the USA.
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • 【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
  • 【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....
Check Stock

Bolt-.25-20x1.25z(180 180024MA;313674MA;

  • Brand new and high quality ABS Injection Molding Triangular Shaped Interview Mic Microphone Station Logo..
  • Square shaped design, large place to show logo, can be engraved with PVC board by yourself or pasted by multicolor printing sticker..
  • Creative Shaped design, large place to show logo, can be engraved with PVC board by yourself or pasted by multicolor printing sticker..
  • Portable and practical Square shaped microphone station logo,large place to show logo, can be engraved with PVC board by yourself or pasted by multicolor printing sticker..
  • Suitable for interview, corporate meetings, press conferences, family gatherings singing, KTV, and very light to carry..
Check Stock

FORMUFIT F00145E-UV Elbow PVC Fitting, Furniture Grade, 45 Degree, 1\ Size, Clear

  • Fits 1" Size PVC Pipe, which has an outside diameter of 1-5/16" (1.315").
  • Superior, glossy clear surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single piece from durable and UV-resistant Furniture Grade PVC.
  • Will not crack, change color or degrade over time like other sub-par PVC fittings.
  • Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
Check Stock

FORMUFIT F0015WC-UV 5-Way Cross PVC Fitting, Furniture Grade, 1\ Size, Clear

  • Fits 1" Size PVC Pipe, which has an outside diameter of 1-5/16" (1.315").
  • Superior, glossy clear surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single piece from durable and UV-resistant Furniture Grade PVC.
  • Will not crack, change color or degrade over time like other sub-par PVC fittings.
  • Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
Check Stock

FORMUFIT F0015WC-BK-4 5-Way Cross PVC Fitting, Furniture Grade, 1\ Size, Black (Pack of 4)

  • Fits 1" Size PVC Pipe, which has an outside diameter of 1-5/16" (1.315").
  • Superior, glossy black surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single peice from durable and UV-resistant Furniture Grade PVC..
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
Check Stock

FORMUFIT F0125WC-WH-10 5-Way Cross PVC Fitting, Furniture Grade, 1/2\ Size, White (Pack of 10)

  • Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0.840").
  • Superior, glossy white surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single peice from durable and UV-resistant Furniture Grade PVC..
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
Check Stock

FORMUFIT F0345WC-WH-8 5-Way Cross PVC Fitting, Furniture Grade, 3/4\ Size, White (Pack of 8)

  • Fits 3/4" Size PVC Pipe, which has an outside diameter of 1-1/16" (1.050").
  • Superior, glossy white surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single peice from durable and UV-resistant Furniture Grade PVC..
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
Check Stock

FORMUFIT F1144WT-WH-4 4-Way Tee PVC Fitting, Furniture Grade, 1-1/4\ Size, White (Pack of 4)

  • Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0.840").
  • Superior, glossy white surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single peice from durable and UV-resistant Furniture Grade PVC..
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
Check Stock

FORMUFIT F11290E-WH-4 90 Degree Elbow PVC Fitting, Furniture Grade, 1-1/2\ Size, White (Pack of 4)

  • Fits 1-1/4" Size PVC Pipe, which has an outside diameter of 1-5/8" (1.660").
  • Superior, glossy white surface finish with tapered sockets for a Professional appearance.
  • Injection molded as a single peice from durable and UV-resistant Furniture Grade PVC..
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
Check Stock