WELD-ON 12121 PB-1 Brush for Solvent Cement, Fits Pint and Quart Cans, 1 inch, Pack of 25

  • Precisely apply solvent cement when welding PVC, CPVC, and ABS pipes.
  • Designed to fit pint and quart solvent cement cans.
  • Sturdy bristles allow for precise placement and thorough coverage.
  • Extended plastic handle gives you a firm handhold during extended welding applications.
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

Gardner Gibson 7760-3-16 Dynamite Vinyl Over Vinyl Wallcovering Adhesive, 1 qt

  • Formulated for PVC and CPVC pipe and fittings.
  • Removes surface dirt, grease and grime for preparation before solvent cementing.
  • Less aggressive than clear and purple primer only products.
  • Purple tint ensures piping has been primed prior to solvent cement application.
  • For use in areas where plumbing code calls for verification that a primer has been used.
Check Stock

Canplas 414463BC PVC Sew 3X4X4 Flush Down Spout Adaptor White

  • Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC).
  • Flame Retardant, will not support combustion in the absence of an ignition source.
  • Maximum Service Temperature Rated at (140F) +60C.
  • High chemical resistance to nearly all acids, alkalis, alcohols, halogens and other corrosive media.
  • Use approved PVC primer and solvent cement to make PVC Joints.
Check Stock

Stone Pro, Traverfill Pro Adhesive

  • Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
  • Promotes maximum fusion between pipe and fitting during welding.
  • Specially formulated for wet and/or quick-set applications.
  • Compatible with all classes and schedules of PVC and CPVC.
  • Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock

Valterra 2201X PVC Unibody Gate Valve, Silver, 2\ Slip w/Gate Keeper

  • Stainless steel shafts prevent rust or corrosion.
  • Locking handle provides positive shut off and easy gate opening.
  • Maximum recommended working pressure is 50 psi.
  • Solvent Cement traps to prevent from over gluing.
Check Stock

Valterra 6\ PVC Gate Valve - Slip Hub Fittings with Stainless Steel Paddle

  • Stainless steel shafts prevent rust or corrosion.
  • Locking handle provides positive shut off and easy gate opening.
  • Maximum recommended working pressure is 50 psi.
  • Solvent Cement traps to prevent from over gluing.
Check Stock

Weldon 16-- Sci grip 16 -- 5 oz. tube-- 3 PACK

  • Medium bodied, fast-setting, high-strength solvent cement for bonding acrylic.
  • It will also bond rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other.
  • It will also bond to other plastics and porous materials.
Check Stock

SCIGRIP 16 10315 Acrylic Cement Low-VOC Medium Bodied 5 Ounce Tube Clear 2

  • 16: Medium bodied, fast-setting, high-strength solvent cement for bonding acrylic.
  • It will also bond rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces.
Check Stock

SCIGRIP 16 10315 Acrylic Cement Low-VOC Medium bodied 5 Ounce Tube Clear 3-Pack

  • 16: Medium bodied, fast-setting, high-strength solvent cement for bonding acrylic.
  • It will also bond rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces.
Check Stock

SCIGRIP 16 10315 Acrylic Cement Low-VOC Medium bodied 5 Ounce Tube Clear 4-Pack

  • 16: Medium bodied, fast-setting, high-strength solvent cement for bonding acrylic.
  • It will also bond rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces.
Check Stock

FORMUFIT Furniture Grade PVC Pipe, 40", 1/2" Size, Black (3-Pack)

  • FURNITURE GRADE PVC PIPE – Made from ultra-strong, UV-resistant premium furniture grade PVC material. This is an engineered plastic that is designed for outdoor use, weatherability, and can be used in direct sunlight without becoming brittle or shattering..
  • SOLID, BEAUTIFUL PIPE – Monolithic, solid-wall pipe has the same color inside and out. Unmarked, glossy surface finish gives a clean, professional appearance that makes projects look incredibly professional and properly finished..
  • UV RESISTANT – Infused with UV inhibitors to allow the pipe to be used in the sun. Will not crack, change color or degrade over time like plumbing-grade PVC pipe..
  • CONNECT EASILY: Join by solvent welding (standard clear PVC cement) or by press-to-fit. Can also be used with screws between where the pipe and fitting meet to make removable and reusable connections..
  • PRODUCT SPECIFICATIONS: Fits 1/2” Size PVC fittings. Pipe has an actual outside diameter of 0. 840 in. (13/16 in. ). Average Inside Diameter: 0. 622 in. . Minimum wall thickness: 0. 109 in..
Check Stock

Spears 447 Series PVC Pipe Fitting, Cap, Schedule 40, 2' Socket

  • 【Apply To】Cap for closing the end of 2" pipe or fitting, which outside diameter of 2.374". Socket end for connecting to unthreaded pipes or fittings..
  • 【Material】6 pcs Heavy Duty 2 Inch PVC Pipe End Cap Fitting Made of high-quality PVC, high-impact strength, resistant to frost and corrosion, long service life..
  • 【Easy Installation】They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • 【Wide Application】Furniture-Grade Parts, suitable for indoor and outdoor use.
  • Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines, etc..
  • 【Use with Confidence】Meets ASTM D2466 and D1784 standards, comply with NSF requirements..
Check Stock