Adamas-Beta Syringe Filters PVDF 13mm Diameter 0.22μm Pore Size 100pcs
- SPECIFICATION - PVDF syringe filters diameter: 13mm, pore size: 0.22um, 100pcs.
- UNIFORM PORE SIZE - The pore size distribution of the filter membrane is uniform, the porosity is high, and the filtering effect is good.
- UNIQUE DESIGN - These PVDF syringe filters is that they are wall marked for .22um - when working with different requirements for filtration one needs....
- PREMIUM MATERIAL - Hydrophobicity, with high flow rate and lowest protein adsorption. It has high chemical and thermal stability, acid and alkali....
- SUITABLE - Widely used in science laboratories for filteration of small volume samples, such as culture medium, additives, grain spawn jars, buffers....
Check StockJoyTube 5 Packs Check Valve 1/8” 3MM One-Way PVDF Plastic Hose Barb for Fuel Gas Liquid Air
- One way inline Check valve can connect with hose barb in both sides.
- Barb hose check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa.
- PVDF wear resistant check valve’s inside is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
- Perfect for the hydraulic system to prevent reverse flow of material, or compressed air for pneumatic system to prevent.
- Made of PVDF, sturdy, wear-resistant and durable for long service.
Check StockBLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free
- ...lux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
- 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
- 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
- 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-proof....
Check StockPower Acoustik 12" Woofer Dual 4 Ohm 2500W Max
- Overcompensating Motor Structure for Increased Magnetic Strength, 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics, Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up, Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat, Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone.
- Non-Magnetic Non-Resonate Die-Cast Aluminum Frame, 2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power, High-Temperature Tolerance Adhesives Resist Thermal Failure, Nickel Plated 8ga Spring-Loaded Compression Wire Terminals, Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection.
- High-Density Polyether Foam Surround w/ UV & Chemical Protection, Dual Poly-Cotton Suspension Dampen Violent Accelerations, Stitched Voice Coil Leads Prevent Potential Damage, 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included.
- Efficiency (1w/1m): 86.50, Voice Coil Configuration: 2.50″ Dual 4Ω, Motor Volume: 254oz Re: 7.230Ω Fs: 28.60Hz Qes: 0.416 Qms: 4.722 Qts: 0.383 Diameter: 12”.
- Vas: 1.69ft3 Bl: 24.55tm Mms: 200.815g Cms: 152.013 Sen: 86.56db MAX Power: 2,500w RM....
Check StockMemphis MJM622 6.5' 700W RMS Dual 2-Ohm MOJO Series Subwoofers
- Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 1.5″ voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 6.5″, Power Handling: 700W RMS Power | 1400W Peak Power. Sensitivity: 82dB, Magnet Size: 80 oz, Mounting Depth: 5″, Cut Out Diameter: 5.95″, and Voice Coil Diameter: 1.5″..
Check StockSundown Audio X-8 Series Subwoofers 800W RMS/Subwoofer (Pair X-8 V.3 D2 8' Subwoofers)
- Black Aluminum 2.5” voice coil former for superior heat dissipation.
- Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
- High strength & patented cast aluminum frame.
Check StockNVX VSW84v2 8 inch VS-Series Car Audio Subwoofer - Dual 4 Ohm Voice Coil 500 Watts Peak & 250 Watts RMS
- 8" VS-Series Version Two Car Subwoofer with a 4 Ohm Dual Voice Coil.
- Power Handling: 250 watts RMS - 500 watts Peak | Sensitivity: 85 dB (1W/M) | Resonance Frequency (Fs): 36 Hz | Frequency Response: 20 - 200 Hz.
- 2.5” Aluminum Voice Coil: Each of our subwoofers is equipped with a 2.5” aluminum voice coil, providing maximum current distribution throughout....
- Accurate Hard-Hitting Bass: The VS-Series subwoofers pack a massive punch when it comes to bass output. Our subwoofers are designed with a non-pressed....
- Aluminum Shorting Ring: What makes our subwoofers stand out from other subwoofers on the market is the aluminum shorting ring. The ring is a....
Check StockPrecision Port 2' Flared Speaker Cabinet Port Tube Kit
- ...in high output amplifier & RCA/speaker line input.
- RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill.
- 1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
- BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
- 35Hz - 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle's sound system.
- One 8'' High Power 4 Ohm Subwoofer - 1.5'' Aluminum Voice Coil.
- Built-In High Output Amplifier - Bass Reflex Vent for Added Sub-Bass Response.
- Blue LED Light Behind The Grill - 250 Watts Max Power Handling.
- Blue Polypropylene Cone - RCA/Speaker Line....
Check StockMJMECHEV8D1 Select Chevy Trucks (2) MOJO 8" Subwoofers Custom Enclosure
- Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 2" voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 8", 900W RMS Power | 1800W Peak Power. Sensitivity: 82 dB, Magnet Size: 105 oz, Mounting Depth: 5.75", Cut Out Diameter: 7.32", and Voice Coil Diameter: 2"..
Check StockPair Rockville X6.5C Competition 6.5
- Features: Pair Rockville X6.5C Competition 6.5" 1000 Watt Component Car Audio Speakers and Titanium Tweeters, (2) 6.5 Woofers for Mids and Bass, (2) 2 Aluminum Tweeters with Titanium Diaphragms, (2) Audiophile Crossovers (these are very expensive crossovers with a lot of copper coils in them for advanced sound filtering to give you the best sound quality), Peak Power Rating: 1,000 Watts Per Pair/500 Watts Each, CEA Compliant RMS Rating: 250 Watts Per Pair/125 Watts Each.
- Paper Woofer Cone With Cloth Edge Gives Amazing Bass and Mids, True Aluminum Bullet to give the woofer amazing sound, Steel Stamped Basket, Oversized 1.5 ASV Voice Coil, 14 oz. High Quality Ferrite Magnet, Cutout Diameter: 5.78 inches, Impedance: 4 Ohms, Tweeter Size: 3.86' x 1.97 inches, Cutout Diameter of Tweeter: 2.80inches, Audiophile 2-Way Crossover with 12db/Octave Roll-Off, Crossover Has Tweeter Attenuation Adjustment of -3db, -6db, Frequency Response: 40Hz 20,000 Hz.
- Sound Pressure Level: 90dB @ 1w/1m, Fs: 110 Hz, Re: 3.6 Ohm, Qes: 1.024, Qts: 0.865, Qms: 5.579, Titanium Diaphragm Tweeter with 1 Kapton Voice Coils - the most premium voice coils on the market, This item uses CCAW voice coil windings which is the most expensive and best material for voice coil winding, Pre-insta....
Check StockMemphis Audio MJM644 MOJO Series 6.5 Inch 700 Watt RMS 1,400 Watt Peak Dual Subwoofer Vehicle Car Audio System
- Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 1.5″ voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 6.5″. Power Handling: 700W RMS Power | 1400W Peak Power. Sensitivity: 82dB, Magnet Size: 80 oz, Mounting Depth: 5″, Cut Out Diameter: 5.95″, and Voice Coil Diameter: 1.5″..
Check StockAudiopipe Black ATR series 600 watt max tweeter (each)
- 350 Watt Aluminum Bullet Titanium Horn Tweeter – 1 Pair.
Check StockMST-101 Automotive Electronic Faults Detector, Spark Tester Pen, Auto Ignition Coil Tester Tool
- 【Fitment】Ignition Coil(traditional coil, double spark coil, single spark coil) generator, fan, electric-magnetic valves, emission gas controlling value, fuel injectors, relay. etc..
- 【Features】You can quickly and easily diagnose whether the ignition system of the car is working properly, avoid fire, and burn out the ignition coil. It provides a safe and reliable troubleshooting method that is convenient, economical and time-saving..
- 【Long-lasting】The Spark Tester is adopted to the high-quality aluminum material with high quality. The internal LED light will show you if the ignition system is normal. The ABS head is easy to insert and long-lasting, making it the right choice..
- 【Long-lasting】The car to be tested should park at an area with good air condition, can not suck into exhaust emission from engine. During test process, it is necessory to avoid the moving parts and heat source to protect tester and testing equipments..
- 【Good Performance】Excellent mechanical stability and corrosion protection. Professional manufacturing, high accuracy.
Check Stock